What kind of car was the 1964 Chevy Impala?
What kind of car was the 1964 Chevy Impala?
The ‘50s were over, and the cars of the early ‘60s were restrained in their use of chrome and trim. The slightly restyled Impala Super Sport with a more rounded, softer look became its own series in 1964. The SS badge was to become Chevrolet’s signature for performance though it often was an appearance package only.
When did the Chevrolet Impala SS come out?
The slightly restyled Impala Super Sport with a more rounded, softer look became its own series in 1964. The SS badge was to become Chevrolet’s signature for performance though it often was an appearance package only. The SS was the most luxurious and sporty model and only available as a two door convertible or coupe.
What was the top of the line Chevy Impala in 1961?
A “Super Sport” (SS) option debuted for 1961. This was also the last year the top station wagon model would have the Nomad name. Power brakes were $43. The 1962 model featured new “C” pillar styling for all models except the 4-door hardtop.
What kind of seats did the Chevy Impala have?
A six-way power seat was a new option, as was “Speedminder”, for the driver to set a needle at a specific speed and a buzzer would sound if the pre-set was exceeded. The 1960 Impala models reinstated three round taillights on each side, and a white band running along the rear fenders.
What kind of car was the 1963 Chevy Impala?
Chevy, Dodge, Plymouth, Pontiac and Ford all pushed their V-8-equipped, behemoth-bodied offerings to the outer limits of power production and weight reduction.
How did the Chevy Impala get its name?
Thus the Impala was named The Old Reliable IV, which also recognized the previous collaborations: The Old Reliable ’61 Chevy sedan race car; The Old Reliable II ’62 Chevy Bel Air race car; and The Old Reliable III ’62 Impala race car. Under the hood was a revised W-series engine.
What was the stroke of a 1963 Z11 427 Impala?
The stroke was increased from the 409 by .150-inch using a forged-steel 3.65-inch stroke crank to make it a 427, while the bore remained at 4.3125 inches. Forged connecting rods were employed, and forged domed pistons pushed the compression ratio to 13.5:1.
What was the compression ratio on a 1963 Chevy Impala?
Forged connecting rods were employed, and forged domed pistons pushed the compression ratio to 13.5:1. High-port cylinder heads with 2.19/1.72-inch valves, a cam with 325-degrees duration and .556-inch lift and a high-port two-piece (separate valley pan) aluminum intake were used, as was a pair of Carter AFB carbs.
What was the back end of a 1959 Chevy Impala like?
As with all 1959 Chevy’s, the new Impalas were longer, lower, wider, and more curvy. They also had the wildest tailfins besides Cadillac. The rear end sported “bat wing” rear fenders, “cat’s eye” taillamps, and a huge decklid.
Is the Chevy Impala still a good car?
Although it would later be eclipsed by smaller, lighter automobiles, the Impala still remains the performance car of choice for those that like big cars. Comments: The Impala began as the top option level on Chevrolet’s Bel Air line.
How many Chevy Impalas were made in 1964?
Stripped down Biscayne’s with souped up 409’s were the scourge of every drag strip. 185,325 Impala SS’s went out the door in ’64, 81,897 rag tops and 103,213 2-door hardtops. That same year Chevy cranked out 8,864 409 engines in three horsepower versions.
The slightly restyled Impala Super Sport with a more rounded, softer look became its own series in 1964. The SS badge was to become Chevrolet’s signature for performance though it often was an appearance package only. The SS was the most luxurious and sporty model and only available as a two door convertible or coupe.
What kind of engine did Chevy Impala have?
Ford launched the Mustang with the HiPo K-Code engine and GT 350 to usher in the “Pony car” era and Pontiac crammed a 384 HP V8 into the Tempest to give birth to the GTO, but for unbeatable “Giddy Up” a full sized Impala SS with a 425 HP 409 cu in V8 was the way to go.
How many horsepower does a Chevy Impala 409 have?
That same year Chevy cranked out 8,864 409 engines in three horsepower versions. Because of Chevys record keeping, however, the exact number of Impala SS 2-door hardtops fitted with the 409 425 HP engine is not known for certain. A good guess would be somewhere around 1,600, give or take.
1964 Chevy Impala w/ Hydraulics Make: Chevrolet Model: Impala Type: Sedan Trim: Chrome Year: 1964
Do you need hydraulics on a Chevy Impala?
The hydraulics on it is worth 10K alone. Can be removed by most body shops if you don’t want it or simply disable it. (Front, Back, Side to Side) If you want 3 wheel motion, you’ll need to add a pump and 2 more batteries.
How old is the Chevy Impala 4 door?
1964 Chevy Impala 4 Door – All exterior trim CHROMED. Undercarriage is CHROMED. A lot of parts under the hood were CHROMED. Original Interior in great condition for it being 52 years old. A stereo is in the dash.
How many cylinders are in a 1964 Chevy Impala?
A 1964 Impala SS with 8 cylinders under the hood and 3 pedals in the foot well: what more could This 1964 Chevrolet Impala coupe is an interesting lesson in enduring honesty. It stays true to its This original 1964 Chevrolet Impala SS Custom Coupe has been completely restored and is powered by
The hydraulics on it is worth 10K alone. Can be removed by most body shops if you don’t want it or simply disable it. (Front, Back, Side to Side) If you want 3 wheel motion, you’ll need to add a pump and 2 more batteries.
1964 Chevy Impala 4 Door – All exterior trim CHROMED. Undercarriage is CHROMED. A lot of parts under the hood were CHROMED. Original Interior in great condition for it being 52 years old. A stereo is in the dash.
This original 1964 Chevrolet Impala SS Custom Coupe has been completely restored and is powered by 1964 Chevy Impala SS. Frame of restoration. Extremely clean all the way around.
When was the last year the Chevy Impala was made?
Chevrolet Impala. Jump to navigation Jump to search. The Chevrolet Impala (/ɪmˈpælə, -ˈpɑːlə/) is a full-size car built by Chevrolet for model years 1958 to 1985, 1994 to 1996, and since 2000 onwards. The Impala is Chevrolet’s popular flagship passenger car and is generally among the better selling American made automobiles in the United States.
Who was the first person to see the Chevrolet Impala?
The first styling sketch that would directly influence the finished Chevrolet automobile was seen by General Motors Styling vice president Harley Earl in October. Seven months later, the basic design was developed.
What kind of engine did the 1958 Chevy Impala have?
The Ramjet fuel injection was available as an option for the Turbo-Fire 283 V8, not popular in 1958. A total of 55,989 Impala convertibles and 125,480 coupes were built representing 15 percent of Chevrolet production. The 1958 Chevrolet Bel Air Impala helped Chevrolet regain the number one production spot in this recession year. Turboglide auto.
