What does TPMs do on a 2007 Chevy Impala?

The 2007 Chevrolet Impala is equipped with a Tire Pressure Monitor System (TPMS) that uses sensors to monitor tire pressure levels. The Impala’s display on the instrument panel shows a low tire pressure alert if it senses that one or more of the tires is below the recommended air pressure. The display shows the current pressure of each tire.

Can You disable the TPMS in GM vehicles?

The U.S. Department of Transportation has mandated that all vehicles manufactured after 2008 include a tire pressure monitoring system (TPMS). Although you cannot disable the TPMS in a General Motors (GM) vehicle, you can reset the system if you recently checked your tires and inflated them properly.

How does the tire monitor work on a 2007 Impala?

Increase or decrease the air pressure of the tire for five seconds to activate the tire pressure monitoring sensor. The horn will make a chirp sound to indicate that the sensor has been activated. Move to the passenger’s side front tire. Repeat the inflating or deflating procedure used on the driver’s side front tire.

How does TPMS work on a Honda Accord?

Direct TPMS has TPMS sensors are installed in the wheel; if one or more tires indicate low tire pressure, the TPMS sensors will transfer the information to the vehicle’s ECU. An indicator light (low-line TPMS system) or each tire pressure will show on the dash (high-line TPMS system).

How to reset tire pressure sensor TPMS light on?

There are 2 ways to reset TPMS on the old Chevrolet Impala. Please choose 1 of the two ways below according to your vehicle specifications. Time needed: 7 minutes. If you have a 2006 2007 2008 2009 2010 Chevrolet Impala, you can reset the TPMS by increasing or decreasing the tire pressure without using tools.

What is the tire pressure warning number on a Chevy Impala?

The contact owns a 2009 Chevrolet Impala. The contact stated that the driver side door failed to open with the key fob. In addition, the tire pressure warning indicator illuminated, but the tires appeared normal. The contact stated that the failures might be related to NHTSA campaign number: 14v355000 (electrical system).

How to reset the light tire pressure in an Impala?

How to Reset the Light Tire Pressure in an Impala. The Chevrolet Impala has a tire pressure monitor system that notifies the driver of significant changes in the pressure of the tires. The system is originally calibrated by driving the vehicle with correct tire pressure over a 45 to 90 minute time period at differing speeds.

Where is the tire sensor on a 2007 Impala?

Exit the Impala and move to the driver’s side front tire. Remove the valve stem cap from the tire. Increase or decrease the air pressure of the tire for five seconds to activate the tire pressure monitoring sensor. The horn will make a chirp sound to indicate that the sensor has been activated. Move to the passenger’s side front tire.

What does reduced engine power mean on a Chevy Impala?

The reduced power displays on the console, the car slows to a crawl and the Check Engine light comes on. I travel 40+ miles each way to work in Atlanta traffic with speeds around 65-80 (big trucks).

How does the tire pressure monitor work on a Chevy Impala?

The Chevrolet Impala has a tire pressure monitor system that notifies the driver of significant changes in the pressure of the tires. The system is originally calibrated by driving the vehicle with correct tire pressure over a 45 to 90 minute time period at differing speeds.

What is the service engine code on a Chevy Impala?

And we wonder why people buy foreign! 😡 When the service engine light is on the code will be P2138 and because the condition that causes it is intermittent the dealer will not be able to read the code if the light has gone out as was the case with mne last week.

How do you change the tire on a 2007 Impala?

Move to the passenger’s side front tire. Repeat the inflating or deflating procedure used on the driver’s side front tire. Move to the passenger’s side rear tire. Repeat the procedure used on the first two tires. Move to the driver’s side rear tire. Repeat the inflating or deflating procedure used on the first three tires.

What kind of tire monitor does a 2007 Chevy Impala have?

The 2007 Chevrolet Impala is equipped with a Tire Pressure Monitor System (TPMS) that uses sensors to monitor tire pressure levels.

How does tire learning active work on an Impala?

The message “Tire Learning Active” will appear on the display. Exit the Impala and move to the driver’s side front tire. Remove the valve stem cap from the tire. Increase or decrease the air pressure of the tire for five seconds to activate the tire pressure monitoring sensor.

Can a throttle sensor be replaced on a Chevy Impala?

Chevrolet Impala LTZ 2009. Accelerator pedal sensor replacement! Easy Fix! – YouTube The TPS in the throttle body is a more common failure, fortunately it is now available separate from the TB itself. Rockauto has them fairly cheap.

Where is the position sensor located on an Impala?

Since its throttle by wire will the sensor be located up by the gas pedal? Not really sure on this one. Any help is appreciated! There is a position sensor thats part of the pedal and a throttle actuator on the throttle body. Which, if any, is more likely to malfunction?

How to relearn the GM TPMS setup procedure?

Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor. A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position. Proceed to the passenger side front tire, and repeat the procedure in Step 8.

When did they start using TPMs on cars?

Starting in 2007, most vehicles use a TRW-, Schrader- or VDO-manufactured system that all share the same relearn procedures and behaviors, with only a few exceptions (like the Pontiac Vibe). Shops should use a TPMS tool to reset the sensor positions after rotation.

How to reset and relearn TPMs on Chevy cars?

Instruction on How to reset and relearn the TPMS on Chevy Cars. A relearn magnet, or another properly formatted TPMS scan tool, is required to perform this procedure. Relearn Procedure. 1. Inflate all tires to pressure listed on the placard. 2. Make sure the vehicle has been in park for at least 2 minutes before proceeding. 3.

The 2007 Chevrolet Impala is equipped with a Tire Pressure Monitor System (TPMS) that uses sensors to monitor tire pressure levels.