What does the TPMS light on a Chevy Suburban mean?
What does the TPMS light on a Chevy Suburban mean?
In North America, the Suburban is also used by the police, fire brigade, and the military. If you replacing a spare tire with a road tire containing the TPMS sensor on your Chevy Suburban, the system will detect a malfunction and the low tire pressure warning light will blink.
How to reset tire pressure sensor TPMS light on Chevrolet?
Just like the previous model, you’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this latest Suburban model year. Here’s how to do it: Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem.
How to check tire pressure on a suburban?
Open your driver’s side door and inspect the door jamb to find the tire specification sticker. This sticker lists the recommended inflation setting for your Suburban’s tires, which will vary from vehicle to vehicle depending on the tire size. Unscrew the valve stem caps and apply the tire pressure gauge to determine the current inflation level.
Where is the relearn button on a Chevy TPMS?
Press the SET/CLR button, located at the end of the turn signal lever, to begin the sensor matching (relearn) process. A message asking if you are sure you want to relearn should display. 6. Press the SET/CLR button again to confirm the selection. The horn should sound twice signaling the car is in relearn mode.
How do you reset the TPMs on a Chevy Suburban?
If you have 2007 2008 2009 2010 Chevrolet Suburban, you can reset the TPMS by increasing or decreasing the tire pressure without tools. Follow these instructions to get started: If your vehicle has an ignition button, press the Engine Start/Stop button without touching the brake pedal
When to reset tire pressure sensor TPMS light?
This procedure should apply to the tenth and eleventh generation of the Chevy Suburban (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2019 2020 model years). Hopefully, the article How To Reset Tire Pressure Sensor TPMS Light on Chevrolet Suburban (2007-2020) can solve your problem.
How do you check tire pressure on a Chevy TPMS?
1. Inflate all tires to the pressure listed on the placard. 2. Turn ignition to the ON/RUN position with the engine OFF (not the ACCposition) and lower the driver’s side window. 3. Scroll to the Tire Pressures screen, using the steering wheel buttons, then holddown the checkmark button until the horn sounds.
Open your driver’s side door and inspect the door jamb to find the tire specification sticker. This sticker lists the recommended inflation setting for your Suburban’s tires, which will vary from vehicle to vehicle depending on the tire size. Unscrew the valve stem caps and apply the tire pressure gauge to determine the current inflation level.
In North America, the Suburban is also used by the police, fire brigade, and the military. If you replacing a spare tire with a road tire containing the TPMS sensor on your Chevy Suburban, the system will detect a malfunction and the low tire pressure warning light will blink.
What does the tire pressure monitor on a Chevrolet do?
The Tire Pressure Monitoring System (TPMS) on your Chevrolet vehicle is designed to warn the driver when low-tire-pressure conditions exist. A sensor measures tire pressure, then transmits data to the Tire Pressure Monitor.
Just like the previous model, you’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this latest Suburban model year. Here’s how to do it: Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem.
What to do if your tire pressure monitoring light comes on?
If your Tire Pressure Monitoring System light comes on, you can bring your vehicle to the Certified Service experts for assistance. Your Chevrolet tires were specifically chosen for your vehicle to help provide a safe ride in a variety of driving and weather conditions.
