What does the code p0171 mean on a GMC Sierra?

P0171 and P0174 both indicate that there is a lean condition present in your GMC Sierra. By themselves, these are some of the most common OBD2 codes. When they are together, it indicates that the entire engine is running lean. Both of these codes are generic, which means they have the same meaning (Sierra or not).

What does the code p0174 mean on a Chevy Silverado?

P0174 and P0171 are OBDII trouble codes. The code technically stands for: These codes are thrown when the oxygen sensors detect that there’s not enough oxygen in the exhaust system. This is commonly referred to as a “lean” condition.

What are the trouble codes on my GMC Sierra?

Two of the most common trouble codes with the GMC Sierra are P0174 and P0171 . Both of these codes reference a number that is given to you when you plug your truck into a OBDII scanner. P0171 and P0174 occur when the air/fuel mixture on the truck gets too lean.

Can a lean code p0171 be a missfire code?

The bulletin states that it is very common to see lean codes P0171 & P0174 TOGETHER, and also a possible missfire code. The catch to this is that GM also changed the gasket material to help fix this problem, and they state that the updated ones are supposed to be teal green, and to not use the orange ones again. Click to expand…

Is there a p0171 code on my GMC Sierra?

The code is often accompanied by the P0171 Code, which is for the same problem, but the other fuel bank. P0171 and P0174 GMC Sierra – This is the article for you if you are experiencing both of these trouble codes at the same time.

P0171is an OBDII trouble code. The code technically stands for: Fuel Trim System Lean Bank 1 The code is thrown when the oxygen sensors detect that there’s not enough oxygen in the exhaust system. This is commonly referred to as a “lean” condition.

What does a p0131 mean on an oxygen sensor?

Although generic, the specific repair steps may vary depending on make/model. Essentially the same as P0136 and P0137 , a P0131 code refers to the first oxygen sensor on Bank 1. P0131 means the O2 oxygen sensor’s voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL.

What does the code P0300 on a GMC Sierra mean?

P0300 is certainly a cause for concern, and can be a threat to the drivability the GMC Sierra. It will often be accompanied by codes P0301-P0308. These particular codes also indicate that there is a misfire detected, but they specify the specific cylinder.

What are the symptoms of a GMC Sierra OBDII code?

Sierra P0300 OBDII Code Symptoms 1 The P0300 GMC trouble code will trigger the Sierra’s service engine soon light. 2 The vehicle itself may begin to run rough. It depends on how serious the misfire is. 3 The vehicle may produce excess vibration, espescially at lower RPM

What causes the p0171 code on a GMC Sierra?

The P0171 code could also be caused may be caused by one or more of the following: debris on MAF sensor causing an incorrect reading, improper oil level, low or high fuel pressure or Engine Control Temperature (ECT) Sensor reading inaccurate. There is a factory service bulletin for the following GMC models: 2000-2008 GMC Sonoma 2000-2008 GMC Sierra

What does the p0171 code in front oxygen sensor mean?

If the P0171 is combined with the P0174 code, it’s very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter. If the problem persists the front oxygen (O2) sensor may need to be replaced.

What does the p0131 code on bank 1 mean?

Essentially the same as P0136 and P0137 , a P0131 code refers to the first oxygen sensor on Bank 1. P0131 means the O2 oxygen sensor’s voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL.

What does the code p0171 mean on a GMC Sierra?