What does the code b0081 stand for?
What does the code b0081 stand for?
Code B0081 stands for Passenger Presence System. Smaller passengers, such as children, can be injured by an airbag deployment. The passenger presence system (PPS) is designed to monitor the type of occupant sitting in the front passenger seat. This is information is used to disable the front passenger airbag…
What causes the b0081 code to pop up?
Code B0081 is typically caused by one of the following: Sometimes B0081 can pop up intermittently. This is especially true if the code is a history code and not current. Clear the code and see if it returns. If it does, the next step is to perform a visual inspection. A trained eye can check for issues such as broken wires and loose connections.
When does the SDM set the trouble code b0081?
The SDM will set code B0081 if the PPS module has a diagnostic trouble code (DTC) stored. Accessing these DTCS may indicate problems elsewhere that are affecting PPS module operation. Any additional DTCs should be addressed prior to diagnosing B0081.
Code B0081 stands for Passenger Presence System. Smaller passengers, such as children, can be injured by an airbag deployment. The passenger presence system (PPS) is designed to monitor the type of occupant sitting in the front passenger seat. This is information is used to disable the front passenger airbag…
Code B0081 is typically caused by one of the following: Sometimes B0081 can pop up intermittently. This is especially true if the code is a history code and not current. Clear the code and see if it returns. If it does, the next step is to perform a visual inspection. A trained eye can check for issues such as broken wires and loose connections.
The SDM will set code B0081 if the PPS module has a diagnostic trouble code (DTC) stored. Accessing these DTCS may indicate problems elsewhere that are affecting PPS module operation. Any additional DTCs should be addressed prior to diagnosing B0081.
What does trouble code b0071 mean on SRS?
If you own one of the vehicles listed below and have an Airbag light on (SRS supplemental restraint system), you may have one or both of these trouble codes: B0071 or B0081. Both codes relate to a problem in the Sensing and Diagnostics module. Don’t start replacing air bad components like the clock spring or the module.
What are the airbag codes on a Chevy Chevorlet?
Call us at 888-779-9029 M-F 9-5 EST Review the GM Chevorlet airbag codes list below: RF/Passenger Frontal Deployment Loop (Stage 2) Resistance Low Passenger Airbag Module Deployment Circuit -Ckt Resistance Low (Stage 2)
What is the Sub-code for the passenger presence system?
Sub-code 3A indicates the sensing and diagnostic module (SDM) has determined the incorrect passenger presence system module is installed. Sub-code 4B indicates the passenger presence system module is not calibrated.
What to do if your GM airbag light is on?
If your dealer will not cover the repair, contact the GM customer service center. 1. Disable the airbag system. 2. Replace connectors on both driver and passenger seats. Then reroute and attach the harnesses to the seat using the service kit. 2. Disconnect connector C308 from driver’s seat cross-beam. 3. Remove the driver’s seat.
How do you install an airbag body harness?
Install the blue seals on the body harness and the white seals on the seat airbag harness. Strip the insulation off all four leads 5 mm (3/16 in). Align the seals with the wire insulation. 7. On the body harness, position two FEMALE terminals onto the wires. Crimp the terminals onto the bare wire.
Is there a way to read the airbag code?
Many of the scanners that can read the airbag codes will be able to do this. Then take a look under the seat at all of the wiring to make sure all is connected and no wires are damaged or pinched. Next step is to calibrate/initialize the PPS weight sensor.
Where is the my airbag reset code located?
The last step for this code if the first two steps absolutely do not work would be replacing the weight sensor. It may be located under the front passenger seat cushion (on the seat, not floor) It could also be mounted to the side of upper back part of the seat.