What does the code 13 on an air bag mean?

Code 13 (single flash, pause, three flashes) means that the airbag circuit has shorted to ground and Code 14 (single flash, pause, four flashes) means that the primary crash sensor circuit has shorted to ground. These codes are signaled by two flashes, a two-second pause and the number of flashes that corresponds to the second digit.

What is the code for the airbag light?

Code 21 (double flash, pause, one flash) means the diagnostic monitor is not mounted properly.

What does Code 51 mean on Ford airbag?

Code 51 (five flashes, pause, one flash) means the airbag diagnostic monitor’s internal fuse is blown, Code 52 (five flashes, pause, two flashes) means the back-up power supply has had a voltage boost fault and Code 53 (five flashes, pause, three flashes) means the front crash sensor has high resistance or the diagnostic monitor has failed.

What does code 22 mean on Ford airbag?

Code 22 (double flash, pause, two flashes) means the safing center output circuit has shorted to battery voltage, Code 23 (double flash, pause, three flashes) means the memory clear circuit is improperly grounded and Code 24 (double flash, pause, four flashes) means there is a system disarm failure or internal diagnostic monitor fault.

What happens to your airbag control module in an accident?

Send your airbag control module to MyAirbags and save time, money and not having to deal with a dealership! During an accident, seat belt retractors and tensioners are deployed and will lock up by their gas charges, similarly to how airbags are deployed in a collision.

Where does the airbag light go on a minivan?

Two pins of the plug go to belt buckle from the seat belt and two pins go to the belt tensioner. When a cable is disconnected or has a high resistance, then the airbag lamp turns on. I have cleaned the contacts. The airbag lamp went out by itself. The error did not come back after that.

What does the my airbag reset code mean?

Typically, these codes will indicate that there is crash data stored, airbags deployed, communication failure, a full memory, or other airbag, seat belt related issues.

Why is the airbag light always on in my Grand Caravan?

I recently bought a 2008 Grand caravan with some serious issues but knew I was going to be doing some work to get it in good shape. the instrument lights showed 1,the airbag light always on, 2 the ESP/BAS light on. The electric doors and their windows were non functioning, OK the fuse fixed one of the doors but the right door still dead.

What is the Flash code on a Ford air bag?

Lamp flash code: 13 1.3 DTC B1317: Battery voltage high. Lamp flash code: continuous 1.4 DTC B1318: Battery voltage low. Lamp flash code: continuous 1.5 DTC B1342: Air bag control module is defective. Lamp flash code: 12 1.6 DTC B1869: Air bag warning indicator open circuit or short to ground.

What is the DTC Flash code for an air bag?

Lamp flash code: 34 1.24 DTC B2292 Error value 24: Passenger safety belt pretensioner short to ground. Lamp flash code: 34 1.25 DTC B2293 Error value 31: Driver air bag first stage short to ground. Lamp flash code: 19 1.26 DTC B2293 Error value 30: Driver air bag first stage short to battery. Lamp flash code: 19

What does code 13 mean on airbag light?

What does the code on the air bag indicator mean?

If the system detects any problems, it gives you a signal through the airbag indicator by flashing the light several times, giving you the specific problem the test has detected. These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light.

What does the code 21 mean on a Ford airbag?

Codes 21 to 24 These codes are signaled by two flashes, a two-second pause and the number of flashes that corresponds to the second digit. Code 21 (double flash, pause, one flash) means the diagnostic monitor is not mounted properly.

How does the airbag warning light work on a Ford?

by Alexander Poirier. When there is a problem with a Ford’s airbag, the airbag warning light will illuminate and flash a code that identifies the problem. Because airbag problems range from a lost battery feed to a shorted circuit, it is important to understand the codes so that the airbag can be properly repaired.

What’s the code on the air bag light?

I have a 99 F-150 XL*****with the airbag light on. The code is 25. I replaced the Passenger Air Bag Deactivation switch assembly and have the same code. To replace it I disconnected the battery ground cable, removed the center instrument panel finish panel, disconnected the electrical connection and the screws holding the PAD.

How to clear the airbag fault code chart?

Each code is two digits and is counted by quick flashes and pauses. So a flash, flash, pause, flash equates to a code 21 on the fault code chart. Clear the codes with a jumper wire or by a specific brand scanner.

What’s the code on the airbag dash light?

Count the flashes on the airbag dash light. Each code is two digits and is counted by quick flashes and pauses. So a flash, flash, pause, flash equates to a code 21 on the fault code chart. Clear the codes with a jumper wire or by a specific brand scanner.

What’s the code on the Mercury airbag light?

So a flash, flash, pause, flash equates to a code 21 on the fault code chart. Mercury vehicles made prior to 2005 use Flash Codes–the airbag light would flash a 2 digit code repeatedly before remaining lit continuously. However, some Ford, Lincoln and Mercury models that DO NOT use flash codes at all).

Is the Ford airbag code 3-3 still present?

This is a hard fault. The fault condition is still present. This fault cannot be cleared until it is corrected and the DTC is no longer retrieved during the on-demand self test. GO to H2 . This is an intermittent fault. The fault condition is not present at this time.

What is the airbag code on my Ford Crown Victoria?

I have a 2006 Ford Crown Victoria Police Interceptor with an airbag code 3-3 (33) that just popped up this morning. It flashes three times, pauses, flashes another three times, and then stops.

What’s the air bag code on a 2006 Grand Marquis?

I have a 2006 Grand Marquis that the airbag light was flashing a code 3-3 and chiming a series of 5 sets of 5-tone bursts. At first I found a forum that said this was a passenger side air bag issue.

What causes a Ford airbag to stop working?

A 10ohm resistor jumped across the connector will stop the code but best buy a replacement for safety reasons. Bout 4 seatbelt bolt to replace, easy job. I think they fail due to time and moisture and electronic circuit corrosion. I did take emergency apart just to see what was in there. I replaced both off mine a few years ago.

Code 21 (double flash, pause, one flash) means the diagnostic monitor is not mounted properly.

What does the code 13 on an air bag mean?