Easy lifehacks

What does no bus mean on an odometer?

What does no bus mean on an odometer?

What does no BUS mean on an odometer? Fleet and maintenance ma… It cranks but will not start. How /where do I check those. Vocational, Technical or Tra… My 2001 Town and Country has stopped starting when it gets freezing outside. I noticed a code come up on the odometer- p 0442. What does this … read more

Is there no bus, no gauges possible solution?

I’d like to offer my solution to the frustrating “no bus and no gauges” problem that I see is pretty common. I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type.

What kind of truck has no bus gauges?

I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type. My Story… See the end to get straight to my find. I’ve had my gauges go out with the “no bus’ message in the odometer window three times now!

What does no BUS mean on an odometer? Fleet and maintenance ma… It cranks but will not start. How /where do I check those. Vocational, Technical or Tra… My 2001 Town and Country has stopped starting when it gets freezing outside. I noticed a code come up on the odometer- p 0442. What does this … read more

I’d like to offer my solution to the frustrating “no bus and no gauges” problem that I see is pretty common. I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type.

I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type. My Story… See the end to get straight to my find. I’ve had my gauges go out with the “no bus’ message in the odometer window three times now!

What causes the No Bus message on the odometer?

Symptom: Engine will not start. Gauges are inoperative. “No BUS” message displayed on odometer. Problem 1 of 2: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Crankshaft Position (CKP) Sensor.

How to fix no bus odometer on Dodge Ram?

Turn the key back on, and now slowly apply the throttle pedal to wide open and hold it for 3 seconds and then cycle the pedal 2 to 3 times. Your giving the computer the range of the TPS. Now turn off the key again, and now restart. This generally corrects the problem as long as you have verified continuity across all the buss lines.

How many miles does no bus on dash mean?

“NO BUS” on dash, would not change gears, no speedo/tach, all lights flashing, ect. Limped it the rest of the way to work and now trying to figure out my next step. It’s a 3.6L, 40,xxx miles.

Why does my Dodge truck have no gauges?

Fortunately when I finally broke down out of utter frustration and took it to the dealer to have it repaired the first time it didn’t cost me an arm. $108 later the service guy said it was a loose wire connection in the PDC.

Why does my Dodge Ram not have an odometer?

If all that checks out unplug the following sensors: Cranks sensor, Cam/SYNC sensor, TPS, MAP and Trans connector. These 5v sensors can short out the CCD bus because they share the same power source. You will have to cycle the key off and on to reset the PCM and CCD bus once you find the problem.

Why does my Dodge Ram have no bus?

These 5v sensors can short out the CCD bus because they share the same power source. You will have to cycle the key off and on to reset the PCM and CCD bus once you find the problem. “I’ve usually found that the no-buss on the pickups generally comes from the ABS unit.

What does it mean when your computer says no bus?

Fortunatly, it’s still driveable. Till then I’ll be checking other threads and forums for more info and post what I find. “No bus” usually means the computer is having trouble getting info from something; it could be a problem with PCM, or just a connection or sensor. You might get more info pulling up some codes.

Where is the no bus signal on the Odom?

The no bus signal on the odom. Pcm depends on an 8 volt ref to communicate through the bus line to the cluster to operate the dash and to communicate threw the aldl connecter. If any sensor shorts out the pcm goes dead and the no bus sign shows. On the rear drivers side top of bellhousing is the location for the crank sensor.

What does it mean when your car says no bus?

Rate this answer: The “no bus” signal is indicating that there is no fuse, a blown fuse, or no power the the ECM (electronic control module or “the brain”) make sure all relays are operational as well and you should be on your way.

What does no bus mean on a jeep?

The reply stating that the battery was just changed makes me more suspicious that this is the cause. The no bus syndrome on the jeeps. Had one in the shop a no start with the fuel and amp gauge not working. The no bus signal on the odom.

What does no bus mean on the odometer?

RECENTLY HAD “no buS” SHOW ON THE ODOMETER IN MY 2000 JEEP WRANGLER. THE VEHICLE DID START AND RAN WITHOUT A PROBLEM, BUT WHO KNOWS FOR HOW LONG. THE ONLY RECENT CHANGE WAS A NEW BATTERY. Having the same problem on my ’99 Jeep Cherokee.

The no bus signal on the odom. Pcm depends on an 8 volt ref to communicate through the bus line to the cluster to operate the dash and to communicate threw the aldl connecter. If any sensor shorts out the pcm goes dead and the no bus sign shows. On the rear drivers side top of bellhousing is the location for the crank sensor.

What does the no bus sign on my car mean?

Pcm depends on an 8 volt ref to communicate through the bus line to the cluster to operate the dash and to communicate threw the aldl connecter. If any sensor shorts out the pcm goes dead and the no bus sign shows. On the rear drivers side top of bellhousing is the location for the crank sensor. Unplug the sensor and watch your dash.

The reply stating that the battery was just changed makes me more suspicious that this is the cause. The no bus syndrome on the jeeps. Had one in the shop a no start with the fuel and amp gauge not working. The no bus signal on the odom.

Fortunatly, it’s still driveable. Till then I’ll be checking other threads and forums for more info and post what I find. “No bus” usually means the computer is having trouble getting info from something; it could be a problem with PCM, or just a connection or sensor. You might get more info pulling up some codes.

What does no bus mean on Dodge Dakota?

I’ve got “no bus” showing where my odometer mileage is supposed to be, erratic gauges, no stereo, no compass, and every warning light in the info center is on, including the airbag light. Is my computer going bye-bye?

Is the no bus odometer on a 2002 Dodge Dakota?

I have a 2002 dodge dakota getting a no bus in odometer. Replaced Pcm worked fine for 1 year the no bus came back what else could it be? Clicking this will make more experts see the question and we will remind you when it gets answered.

Author Image
Ruth Doyle