What did the check gauge light come on on my Dodge Ram?

My 2004 5.7 Hemi Today the check gage light came on and the oil PSI fell down to zero when I turned a cornner. It was one quart low so I added one quart of oil and it seems fine now. Just sharing.

What does the ” check gauges ” warning light mean?

In most vehicles, the gauge system that triggers the warning light is connected to the vehicle part it measures, such as the oil pressure or temperature components. All gauges have a line or metal tube running to the vehicle parts or engine to ensure that the vehicle is running properly.

What is the problem with my Dodge Ram?

Not open for further replies. I have a 2004 dodge ram with a problem. While driving the oil pressure gauge drops suddenly and the check gauges light illuminates. If I pull over and turn the the truck off then back on, it’s fine. Sometimes it will keep doing it, sometimes it wont.

What causes the CHK guage light to come on?

Chk guages means all gauges . Voltage /temp/oil/ etc etc . Anyone of the gages could cause that warning light . Make sure you havevthe proper voltage ,,that the temp Guage isnt too high or too cold . (Possibly not working ) . Look for random fluctuations in the gauges as well .could be an intermittent issue you just haven’t noticed .

My 2004 5.7 Hemi Today the check gage light came on and the oil PSI fell down to zero when I turned a cornner. It was one quart low so I added one quart of oil and it seems fine now. Just sharing.

Why is the oil pressure light on on my 2005 Ram?

So we just got a 2005 Ram with the 5.7L and if it has sat for a while it seems that when we first start it up the oil pressure gauge will not register anything, and the check gauges light comes on. If we shut the truck off and start it again it always shows oil pressure, and it has never done it to us while driving.

What should I do if my check gauge light is on?

When you notice the Check Gauge light is on don’t panic. Pull over to a safe spot, well lit at night, and look over the dashboard gauges. One of the other gauge lights should be lit. That will be what the Check Gauge light was warning you about. It could be as simple as you are running out of gas or as serious as your engine is having problems.

What’s the problem with my Dodge Ram 1500?

2008 dodge ram 1500 4.7 check gauge came on went i turn on i shut off and turned back on and light are gone any idea whats wrong with it… 16 people found this helpful. No Guru, but im having the same problem on my 08 Ram.

Why does my Dodge truck have no gauges?

Fortunately when I finally broke down out of utter frustration and took it to the dealer to have it repaired the first time it didn’t cost me an arm. $108 later the service guy said it was a loose wire connection in the PDC.

Why does my check gauge drop to zero check?

My check gauges light was also followed by a low voltage code the next day. One thing that I was looking into though was the temp sensor that is under the battery. It reads the temp of the battery and then sends a signal to the PCM on how much to charge. The other thing was maybe the regulator was bad in the PCM.

Why do my Dodge Ram 2500 gauges go off and on?

2003 ram 2500, the gauge cluster doesn’t work, the headlight switch assembly doesn’t work, and nothing on the steering column works. No dashlights illuminate which would be because of the headlight switch assy. Im kinda at a loss here any help short of attempting to just replace all parts and testing luck or may there be a simpler issue?

What should I do if my Dodge Ram goes off?

Your going to need a new dash cluster. when dodge went to the 3rd gen ram, they made the dash cluster a computer basically and it likes to fail its a noted problem with 03-04 dodge trucks. 14 people found this helpful. And I bet it is not going to be a cheap fix either.

When does the Check Engine light come on?

My 03 Dodge Ram check engine light came on and check gages while driving about 30 mph. Truck powered down for a second then lights went off and truck powered back up without me doing anything. Any ideas? 18 people found this helpful.

Why is the check gauge light on on my Ram?

If i shut it off and restart it within 5 seconds everything registers normal. So we just got a 2005 Ram with the 5.7L and if it has sat for a while it seems that when we first start it up the oil pressure gauge will not register anything, and the check gauges light comes on.

When does the check gauge light come on?

When the check gauge light comes on it is mostly in the morning when the engine is cold or when I am slowing down to turn. I looked at the Gauge and noticed the Oil gauge was at half mark and then dropped to zero and then went back to half mark.

How can I tell if oil pressure is low in my Dodge Ram Fixya?

YOU CAN INSTALL IT IN CONJUNCTION WITH THE SENDING UNIT,SO YOU HAVE BOTH . WATCH THE GAUGE WHILE DRIVING AND IDLING TO SEE IF THE MECHANICAL GAUGE ALSO SHOWS LOW PRESSURE.

What was the problem with my 1998 Dodge Ram?

Dodge 1998 1500 4×4 5.2 engine did a tune up cap wires rotor plugs routed wires as per diagram still having power problem when up to tempeture.

What does ” check gauges ” mean in Dodge talk?

Then maybe again a day or so later. No rhyme or reason it seems. It’s to draw your attention to a gauge that has a bad reading. My fuel gauge can suddenly drop to ‘O’ and back setting off the chime. Hmmmm…. I guess I’ll have to pay more attention.

Where is the check gauge on a car?

The Check Gauge light is located on the dashboard. This area is also known as the instrument panel. How the dashboard looks and what gauges are included will vary by the type and brand of vehicle you are driving. Gauges that usually make up the panel watch the amount of oil, gas and battery power, in addition to the engine.

How to diagnose why Ram 1500 speedometer is not working?

Blog – Ram 1500 Speedometer Not Working – Diagnosis and Repair 1 Check the fuse to the speedometer 2 Replace it with another 15amp fuse 3 Make sure that you fill the spare 15amp fuse slot or the problem will not go away, and the missing fuse may cause other malfunctions to occur

What to do when oil pressure comes on in Dodge Ram?

The oil pick up line for your oil pump a lot of times will get clogged with carbon, sludge, and pieces of paper from old oil filters. just drop your oil pan and clean out from in front of the screen. Not hard and fixes your oil pressure problem. 50 people found this helpful. Thank you all so much for your responses and advice.

Why does my fuel gauge go to O?

It’s to draw your attention to a gauge that has a bad reading. My fuel gauge can suddenly drop to ‘O’ and back setting off the chime. Hmmmm….

What does it mean when your oil level is low?

Not necessarily, Your oil level can be low but still have pressure. When it’s low and you suck in air to the pump pressure will drop. This kind of thing happens a lot when coming to a stop. The oil rushes forward starving the pump= low or no pressure. Not open for further replies.

Why does my oil pressure gauge always show no pressure?

The weird part is with the oil pressure switch unplugged, it should always show good oil pressure on the gauge as the circuit is never closed, but I could still get it to show no pressure with the switch unhooked, shut the truck down and started it again, and it worked fine.

What to do if your oil pressure sensor is failing?

Modern cars that have a oil pressure gauge use an electronic signal. The gauge may sit at zero, full, or have erratic readings when the oil pressure sensor is failing. YourMechanic makes getting repairs to your oil pressure sensor easy by coming to your location to diagnose or fix issues.

What does “check gauges” mean?

1. To measure the dimensions, capacity, proportions, or amount of (something), especially by means of a gauge: gauged the thickness of the metal part. 2. To evaluate or estimate: gauge a person’s interest.

What does it mean when check gauges light comes on?

The “Check Gauges” light means pretty much what it says. When this light comes on, it is because one of your gauges is not operating within the “NORMAL” range. You need to look at all of your gauges to see what is going on. It could be low fuel, low oil pressure, high temperature, low battery voltage, or whatever else your instrument cluster may…

What does check Gages mean?

Check gages means that one of the gages is reading an abnormal reading, like hot engine oil pressure issues, charging system voltage, pay attention next time it happens to the readings on the gages for something out of the normal.

Why did the check gauges light come on?

Usually when the Check Gauges light illuminates it is due to one of the gauges going out of range, such as your electrical system, low engine oil or other type of fluids being monitored through the gauges.

Where is the check gauge on a Dakota Durango?

In case anyone reads this in the future, when you start your Dakota/Durango and the Vehicle Starts, Voltage Guage goes up to 10-11 Volts then drops down to 0 and “check gauges” light comes on, your first check is the Big Fuse located in the ECM (engine Control Module). Usually 120-140 or 160 depending on your alternator.

Where can I find the OBD2 code for a Dodge?

Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles. . Engine control module (ECM) -RAM read/ write error

How to reset the Check Engine light on a Dodge Ram?

Dodge Ram: How to Reset PCM and Check Engine Light. 1 Step 1 – Remove the PCM fuse. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch 2 Step 2 – Reset the PCM. 3 Step 3 – Re-install the PCM fuse. 4 Related Discussions.

Why does my Hemi 5.7L go up and then back down?

Learn More. Discussion in ‘ Engine & Performance ‘ started by Kyle94, Dec 29, 2017 . Hi my 2005 ram 1500 hemi’s temp gauge will creep up past half way and then go back down, won’t over heat but I don’t get heat in my cab either, anyone know why?

What’s the normal operating temp for a Dodge Ram?

So here’s a shot of my typical temps once I’m up to normal operating mode in my 2019 1500 Classic with the 5.7 Hemi. My last Ram was a 2014 1500 with the V6. That one ran with the tranny at 190-195 Coolant in low 200’s, but oil normally at or below tranny temp. Of course those numbers all skyrocketed if I was towing anything.

Why is the outside temperature gauge off on my Dodge Ram?

I know some have posted that if the truck sits in direct sun light it can effect the temperature as much as 20 degrees but this wasn’t the case for me since I have been parked in the shade. Would it be beneficial for me to reset the computer by disconnecting the battery in hopes to remedy this issue. Any input would be appreciated?

When do the gauges go off on a Dodge Ram?

Gauges go off & on when 2003 Dodoge 2500 truck hits a bump. Also NOBUS light comes on. Headlights come on also.

What do the gauges on the dashboard mean?

This area is also known as the instrument panel. How the dashboard looks and what gauges are included will vary by the type and brand of vehicle you are driving. Gauges that usually make up the panel watch the amount of oil, gas and battery power, in addition to the engine.

What are the warning lights on a ram?

The following are warning lights and indicators found in vehicles built by Ram. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 70 of them so be patient!

How do I reset the Check Engine light on my Ram 1500?

Now that you’ve confirmed this is in fact the issue, how do you reset the check engine light on a RAM 1500? It’s a pretty easy fix! Follow these simple steps: Disconnect the negative cable from your RAM 1500’s battery. Wait twenty minutes or so. Reconnect this negative cable. Voila! You’re there. Your RAM 1500’s computer should be reset.

When does the check gauge light go off?

The truck shakes and rattles and then the Check Gauge light comes on and then goes away in 5 seconds. The seat belt light is on have not yet figured out how to turn it off other then electric tape. Any reason why this error is now occurring?

How to check guages light battery with Dakota forumz?

Click to expand… and engine oil pressure. If an extreme condition is indicated, the lamp will be illuminated. This is done as reminder to check the three gauges. The signal to activate the lamp is sent via the CCD bus circuits. below. 1. The large one is the battery (output) terminal and it goes directly to the battery

Where is the battery gauge on my check guages light?

Last night the check gauges light came on. I looked at console and my battery gauge needle was not in the middle of the gauge. It was all the way to the left of gauge pointing to -L .

What does it mean when my ” check gauges ” light comes on?

Her mechanical career has spanned 41 years working on everything from Porsches to Heavy Equipment to including classic vehicles which she owns several and has personally restored in a world dominated by men. What Does It Mean When My “Check Gauges” Light Comes On?

What’s the battery voltage on a 2003 Dakota Durango?

My 2003 Dakota does the same thing, even after the meter goes to zero the voltage at battery when running is under spec at 13.8 to 14.2 ish, including when under a load. i had the same problem mine was a lose connection at the neg. battery cable with the aftermarket termal I was using

Is the check gauges light really overheating?

My Check Gauges light comes on while driving periodically and chimes as the temp gauge goes all the way to the right saying the engine is overheating. However, it doesn’t appear to be overheating at all. After about 30 secs of being on, the temp gauge returns to normal (180-195ish) and the Check Gauges light goes off.

Why is the oil pressure gauge always open?

It is closed when it is low pressure, and open when there is proper oil pressure, so that is why when the wire is unplugged the gauge still shows a proper reading.

YOU CAN INSTALL IT IN CONJUNCTION WITH THE SENDING UNIT,SO YOU HAVE BOTH . WATCH THE GAUGE WHILE DRIVING AND IDLING TO SEE IF THE MECHANICAL GAUGE ALSO SHOWS LOW PRESSURE.

When does the oil pressure gauge come on?

As I am coming to a stop while driving, the oil pressure gauge suddenly falls down to 0, then the check gauge light comes on, but only for about 2 seconds before it rises sharply back to where it is supposed to be. What is the problem and how serious is this?

What should I do if my gauges go out?

I’ve had my gauges go out with the “no bus’ message in the odometer window three times now! Checked all the fused, disconnected the battery, to no avail…..Sound firmilliar?

What’s the red light on the engine temperature gauge?

A temperature gauge that has a red light at the hot end of the temperature range. A red or yellow light that will come on and even blink when the engine temperature is too high.

What causes a car temperature gauge to stay on low?

What could cause the temperature gauge to stay on low? The most common causes of why the temperature gauge stays on cold are faulty coolant temp sensor, faulty temperature gauge, broken wires, bad thermostat , and air pockets in the cooling system.

What should the temp of a Dodge Ram be?

The truck is now maintaining a 250° operating temperature. When I rev the engine, the temperature gauge moves slowly back to the 200° range, but when left to idle, it moves back up to 250°. It doesn’t move past that point, I was concerned that it would eventually move to the red line and overheat.

A temperature gauge that has a red light at the hot end of the temperature range. A red or yellow light that will come on and even blink when the engine temperature is too high.

Why are all of the gauges in my car not working?

There are a lot of different types of instrument cluster designs and configurations, but when all of the gauges in a car stop working at once, the problem is usually either a fuse or wiring problem. The first step in diagnosing this type of issue is to identify the fuse associated with the instrument cluster or gauges.

What kind of truck has no bus gauges?

I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type. My Story… See the end to get straight to my find. I’ve had my gauges go out with the “no bus’ message in the odometer window three times now!

How can I find out how fast my Dodge truck is going?

I know I can find this if a dealer service flunky can. I drive it home having know Idea how fast I’m going (slightly uncomfortable to say the least) But the engine and transmission appear to operate fine. Climb under the dash and start wiggling wires, and there is a bunch of them.

What is the instrument cluster on a Dodge Ram?

The Instrument Cluster is the hub that allows the ABS, Engine Computers et all to talk to each other. I would have a really good shop verify this with a good scanner that is CAN BUS capable. I have a 2001 Dodge Ram 1500 4×4 with a 5.9 liter (360) motor, has 121,000 miles on it.

How to know if your Dodge Ram has transmission issues?

There are a variety of ways transmission issues show up in these trucks, including: 1 Slow starts. 2 Engine running rough. 3 Bumping hard into 1st gear. 4 Jerk when shifting from 1st to 2nd. 5 Slipping into gear when in traffic. 6 Hard downshift to stop when slowing down.

What happens when a Dodge Ram shuts off?

When the truck stalls, there is no sputter, or struggle, it is instant. The truck has been feeling slightly underpowered the past 2 days. When the truck stalls, all lights, radio, & gauges (except rpm) stay on, lit, and fully functional with no flicker or change. This issue has only happened at lower speeds, while slowing down or turning.

What are the symptoms of a Dodge Ram overheating?

If any part of this system fails, your Ram will eventually overheat. Dodge Ram Overheating Symptoms. Here are the most common symptoms of a vehicle overheating. 1. Gauge/Temp Light. Your Ram will be equipped with a temperature warning light and/or a temperature gauge. The most common symptom of overheating is the temperature light coming on.

Why is my O4 RAM making a rattle noise?

(Playback ID: v5_lds0kQ6JgU1Fp) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Why does my Dodge Ram make a ticking noise?

The valve train (lifters) can and do make noise without running rough.An exhaust tick would take a lot longer to go away if at all.If it fires and ticks for a few seconds that’s lifters IMHO. I have the same issue but only when shifting into gear I hear the ticking. ???

How do you test a temp gauge in a car?

How to Test a Temp Gauge Step 1. Unplug the temperature gauge from the sending unit. This is usually located to the right of the engine. Step 2. Turn the ignition key to the “On” position. Do not start the car. Step 3. Ground the temperature gauge wire to the engine. You should use jumper wires to …

What to do if your temp gauge is burned out?

Check the fuses inside the car. If the fuse connected to the temperature gauge is burned out you should replace it. Ground the jumper wire connected to the sending unit terminal located next to the engine.

What’s the problem with the temp gauge not working?

00 f150 4×4 4.2 xl I have repl. Cht sensor twice temp gauge stays below the c it idles high when first starts check engine light came back on this has just start a couple of days ago everything was working fine until then any ideas Answered! View the answer I have this problem too Is this a good question?

What should the transmission temp be for a Dodge Ram?

What should the max temp for be transmission… I was driving through the mountains, not towing anything but I was driving 90-95 mph up hill. My bully dog tuner warned me the transmission temp was high at 200 degrees Fahrenheit. Is 200 considered over heating? What temp is too high? 95mph on a mountain… your asking for trouble.

How can I tell if my Dodge engine is still running?

If you do not have the schematic for your particular vehicle, check the three wires at the sensor. The other lead on the meter should touch your vehicle ground. The voltage that remains steady as you manually open and close the throttle is your supply wire. You should read about 5 volts.

What is the diagnostic code for a Dodge check engine?

Refer to our Generic OBD II code list for definitions on all other Dodge diagnostic trouble codes. Manufacturer Specific Codes P0138HO2S12 High Voltage – Related Information P0442Medium EVAP Leak – Related Information P0455Large EVAP Leak – Related Information P0601Internal PCM Controller Failure- Related Information

What does the light on the dash mean?

I’ve honestly never seen this particular light on my dash. The manual was less than no help in determining the point of it. But it comes on and chimes that promptly goes out. Then maybe again a day or so later. No rhyme or reason it seems. It’s to draw your attention to a gauge that has a bad reading.

What to do if your Dodge Ram 1500 has a leak?

When the air conditioner in your 1997 Dodge Ram 1500 starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system. Most refrigerants include a leak sealer that will seal small leaks in addition to filling the R134a refrigerant.

How to add Freon to a 1997 Dodge Ram 1500?

How to add freon to your 1997 Dodge Ram 1500: hook up the can of refrigerant (likely r-134a) to the low pressure port. When your compressor kicks on, add freon to the correct pressure.

What should my AC pressure gauge reading be?

This is the second part of a series on AC pressure gauge readings. If you missed part I, start here. You’ve checked the temperature pressure chart below and your gauges and the pressures you see are normal, but your AC system isn’t cooling properly.

What are the warning lights on a Dodge?

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Dodge. Click a link to learn more about each one.

What’s the oil pressure on a Dodge Ram 1500?

Dodge ram 1500 5.7 hemi 2007 check. Engine light. Came on through a. Code. P0524 sayn oil pressure. To oil but oil light. Never. Came on runs. Good. U think. It’s. The. Sensor You can’t post conmments that contain an email address.

How to reset PCM and check engine light in Dodge Ram?

The reset procedure in your Dodge Ram is as easy as they come. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch on the front of the hood to open it. Find the power distribution center (PDC); it will be a black box near the battery. Unlatch and open the cover of the PDC.

What kind of engine does a Ram 3500 have?

Ram 3500/4500/5500 Chassis Cab Specifications 6.4L HEMI V8 6.7L Cummins ® Turbo Diesel I-6 6.7L Cummins High-Output Turbo Diesel I-6 320 @ 2,800 rpm 325 @ 2,400 rpm 429 @ 4,000 rpm 650 @ 1,400 rpm 750 @ 1,500 rpm 6,417 (392) 6,690 (408) 6,690 (408) Cast-iron block/aluminum head Cast-iron block and head Cast-iron block and head

Can a 2006 Dodge Ram tach gauge be repaired?

This is a repair service for a 2006 Dodge Ram instrument cluster on 1500, 2500 and 3500 gasoline or diesel trucks. If your gauge cluster is experiencing: then we can rebuild and restore your cluster to better than new.

What are the different colors of RAM warning lights?

They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 70 of them so be patient! Models examined include 1500, 2500, 3500, Chassis cab, Promaster, and Cargo Van.

Where to find check engine light codes on Dodge?

These are listed in numerical order for easy searching. When retrieving Dodge check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located near the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.

Why is the Check Engine light on on my Ram 1500?

One simple reason is that your gas cap isn’t secured tightly in place, or your RAM 1500 has a dysfunctional solenoid (the component connecting the car battery to the ignition switch). In any case, if your RAM 1500’s check engine light is on, you don’t want to just reset it. You’ll want to first determine what’s going on.

Why is my Check Engine light still lit?

It’s not uncommon for a check engine light to remain lit long after the issue setting it off in the first place has been fixed. To make it go away, you have to reset the powertrain control module (PCM), which among its many jobs is also in charge of the check engine light.

How to check codes on 03-07 Dodge Ram 5.9 diesel?

How to Check Codes on 03-07 Dodge Ram Cummins 5.9 Diesel 2500 and 3500 – YouTube In this Video I show you how to check any codes that may be coming up on your 2003-2007 Dodge ram 2500 and 3500’s with the 5.9L Cummins.

What kind of engine is a 2005 Dodge Ram 3500?

2005 Dodge 3500 Cummins Diesel, 5.9 litre 24 valve. Trailer Tow package, fifth wheel ball hidden hitch and bumper hitch. No accidents, minor scratches and minor rust. Spray in box liner and sprayed part way up the body of truck. Needs a windshield. 2005 Dodge Ram 3500 Dually, Cummins, V plow.

What are the features of a Ram 3500?

The 2020 Ram 3500 boasts available features like power running boards, full-LED headlamps and the Class-Exclusive RamBox® Cargo Management System with a 115-volt power outlet.

Is the Dodge Ram 3500 a work truck?

If you’ve got big loads to pull and even bigger loads to haul, the 2006 Dodge Ram 3500 is one serious work truck. Now in its third generation of design, the Ram 3500 is considered as close to a commercial hauling and towing vehicle a person can get, with plenty of luxury amenities to make you forget you’re actually working.

The 2020 Ram 3500 boasts available features like power running boards, full-LED headlamps and the Class-Exclusive RamBox® Cargo Management System with a 115-volt power outlet.

How do you reset the tachometer on a Dodge Ram?

With vehicle off, push the trip reset button and hold. 2.) without starting, turn the key on. 3.) keep your finger on the trip reset button and watch the magic happen. Your welcome. I think I am experiencing the beginning symptoms of this problem on my 2006 5.7 hemi.

When do dash lights come on and gauges drop to zero?

Dash lights came on and gauges dropped to zero gasoline w… When driving, occasionally all the dash lights will come on, but the gauges like gas, battery, and mileage, will all drop down to zero. Then my radio shuts off. Fortunately, the car keeps driving. All of this happened today, at a busy intersection, right before a stop light.

Is the tach on my Dodge Ram working?

I have not done any real testing, other than that i kniw my motor and trans are top shape, and that sometimes the tach works perfectly, and sometimes not at all, sometimes it winds all the way around to the stopper under the 0.

Why are the gauges on my Dodge Ram not working?

The interior lights come on the radio comes on but the gauges themselves do not work. I hate to say it but it your ECM might be bad. Check your fuses, relays, and wiring. If none of those work, hook up a diagnostic and see if there’s any codes that you can see to fix it before my assumption. 8 people found this helpful.

Why is my instrument cluster not working on my Dodge Ram?

I have a 2001 dodge ram 1500 5.9l 4×4 and the instrument cluster gauges dont work and it doesnt light up only when I turn the headlights on the headlight indicator lights up on the cluster. All the fuses are good except the illumination fuse it has no power on either side but the fuse is good.

What to do if your Dodge Ram says no bus?

Using a Digital Volt Ohm Meter (DVOM) or labscope, measure the voltage on the 5v reference wire at the Throttle Position Sensor (TPS) or Manifold Absolute Pressure (MAP) sensor. If 5v is not present, unplug the Camshaft Position (CMP) sensor. Turn the key off for 10 seconds. Turn the key on and measure the voltage on the 5v power supply circuit.

Where are the speaker wires on a Dodge Ram?

Red and blue speaker wires everything from green wires are hooked to the battery, Even a white wire was hooked into the fusebox in the door I had to unhook.

Why is my gasket leaking on my Dodge Ram?

If your dodge has high miles replace valve cover gaskets, becauce the high volume pump may cause the gaskets to leak. Whoever said ther none for sludge just has no love for a dodge, or is a moron mechanic that is stuck in his ways.

Why does my Dodge Ram 1500 not start?

I have a 1999 Dodge Ram 1500, with the factory security system (no remote start) and the horn honks continuously no matter if the truck is running or not. So I bought a new Horn Relay thinking that was probably the problem and replaced it, but it still didn’t fix it.

Can a 2004 Dodge Ram 1500 show in code errors?

Shops have checked it and it does not show in code errors. Tl- the contact owns a 2004 Dodge Ram 1500. The contact stated that while driving 35 mph on various occasions, the vehicle stalled and completely shut off with no warning lights illuminating. The contact also mentioned that the vehicle was restarted and functioned normally.

What can cause a Dodge Ram to lock up?

One of the most serious issues that can happen to your Dodge Ram ‘s engine is if it ends up with low oil pressure. Low oil pressure will cause the engine to seize up. When the oil pressure light on, it should be assumed that the engine locking up is imminent. We advise not running the engine until the issue can be properly diagnosed.

It’s to draw your attention to a gauge that has a bad reading. My fuel gauge can suddenly drop to ‘O’ and back setting off the chime. Hmmmm….

Where is the reset button on a Dodge Ram?

Why does my car gauge read cold when I Turn on the ignition?

With the ignition on, the gauge should register cold. If you connect the sending unit wire to ground, the gauge should switch to read hot. If the gauge moves as expected, then you can suspect a bad sending unit. If the gauge doesn’t move when you ground out the sensor wire, then you can suspect a bad gauge.

What to do if your coolant gauge is not working?

Using your coolant temperature gauge as an example, the diagnostic procedure involves locating and disconnecting the sending unit. With the ignition on, the gauge should register cold. If you connect the sending unit wire to ground, the gauge should switch to read hot.

Is the oil pressure gauge a true gauge?

While doing some searching I discovered that the oil pressure gauge isn’t a true gauge and it is just an estimated reading, and that there is basically just a switch that senses if there is pressure or not and if there is pressure it puts the gauge to half way.

Why does my voltage guage only show 9-10 volts?

My voltage guage usually points near the red mark at 9-10 volts. Batteries cranks the starter quickly and it does not seem to lack any electric power. Some times driving, it will raise to about 12 V, but never above, and the next minut point at 9 again.

Why does the Volt gauge drop all the way down?

Lesson learned, volt gauge on the dashboard dropping all the way down likely means alternator. Funny thing is it’s probably set up that way in the ECM to warn the average (clueless) person of something wrong.

How to diagnose a problem with a Dodge 5.9L engine?

1. The cylinder balance test is not supported on the Cummins 5.9L engine and its use will produce incorrect results. Use the scan tool injector kill test function to determine if there is a problem with the cylinder or injector. 2. Check for 20 amps on the injector wiring. If there is less than 20 amps present there is an electrical problem.

What’s the voltage on a Dodge Key Truck?

Turn the key truck starts right up, battery gauge will be right around the 10volts mark for about 5 seconds. Then voltage jumps right to 14+ for about 5 secs then back down to about 10 volts for 5 seconds and then back to 14 where it will eventually stay.

What should the voltage be on a Dodge Ram?

The voltage i am getting right now is around 15 to 15.10 . When i turn my headlights on and radio real loud i am getting around 15.12 to 15.18. I notice my positive cable is tight to the battery which it doesn’t move around but could be in better overall shape. The question is. 15.10 volts ok for dual battery dodge?

Is the Dodge 5.7 Hemi a guzzler?

Maybe the 5.7 hemi will be just as much of a guzzler, but hopefully it’ll have a higher power out put to show for it.

Why do people not like the Dodge 5.9 engine?

Most people don’t know or care that it will clobber any current small block on low end torque and horsepower,below 3000 rpm. And most of these guys who are so proud of their big horsepower numbers don’t look at their tach enough to realize that 99% of their driving is below 3000 rpm.

Why are all the gauges shooting up and down?

All gauges in dashboard shooting up/down like crazy and all indicator lights turn on! Yesterday my wife complained that the gauges on the dashboard are suddenly shooting up and down like crazy, and also all the indicator lights, abs, coolant, door indicators, etc. light up when this happens.

What did the check gauge light come on on my Dodge Ram?