What are the torque specs for front suspension?

Upper control arm to frame nuts/bolts (torque spec made on the nut not the bolt head): Lower control arm to frame nuts/bolts (torque spec made on the nut not the bolt head) You need new bolts for the arm to frame on the lower control arms they are a one time use bolt. : Shock Absorber Upper Nut (torque spec made on the nut not the bolt head):

How much torque do you put on a General Motors car?

Tighten to 8 ft-lbs (10 N-m), then tighten an additional 1/3 turn to at least 37 ft-lbs (50 N-M). Upon initial installation of replacement ball joint, tighten nut to to 81 ft-lbs (110 N-m). 2. Tighten to 8 ft-lbs (10 N-m), then tighten an additional 1/3 turn to at least 48 ft-lbs (65 N-m). 3.

How big of a torque nut do I Need?

Where are the ball joints on a Chevy truck?

Factory installed U-Joints and Ball Joints have no fittings to lubricate them. They are sealed. Chevy / GMC Truck Rear Suspension Torque Specifications

What kind of torque does a Chevy small block have?

900 101.69 Chevy Small Block – 7/16 in. Bolt – Rod Cap Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13 Chevy Small Block – 25-45-65 Helical Sequence Type: Distributor Clamp To Engine Block 20 240 27.12 Type: 20 240 27.12 Type: 35 420 47.45

Front Suspension Torque Specs Chart Item Nm Lbft Front lower control arm to frame 135-162 100-110 Front lower ball joint to spindle 106-163 80-120 Upper A-arm to frame 135-162 100-110 Upper ball joint to Spindle 95-122 70-90 Spindle hub nut 305-338 225-250 Tie Rod end to Spindle 33 25

What are the torques on a car assembly?

1″ SAE TPI Grade 5 14 Grade 8 14 Surface Condition Torque Adjustment Factors Plain Steel, as supplied X 1.0 Plain Steel, degreased X 2.0 Zinc Plated, as supplied X 1.0 Zinc Plated, lightly oiled X 0.9 Galvanised, degreased X 2.1 Galvanised, lightly oiled X 1.1 Heavily greased X 0.7 RECOMMENDED ASSEMBLY TORQUES

What are the torques on a SAE Assembly?

SAE Grades 5 & 8 Bolts & Screws – 1″ SAE 1″ SAE TPI Grade 5 14 Grade 8 14 Surface Condition Torque Adjustment Factors Plain Steel, as supplied X 1.0 Plain Steel, degreased X 2.0 Zinc Plated, as supplied X 1.0 Zinc Plated, lightly oiled X 0.9 Galvanised, degreased X 2.1 Galvanised, lightly oiled X 1.1 Heavily greased X 0.7

Where can I find the latest torque specs?

Find the most up-to-date torque spec listings in electronic format. FelPro-Only.com is your convenient source for advanced sealing information. It’s the place to learn and share “tricks of the trade,” find proper diagnosis and installation instructions, and enjoy easy access to parts reference.

Can You rebuild a 1963 Corvette front suspension?

Now with all of the parts, tools and manuals in hand, let’s get started 1963-1982 Corvette Front Suspension Rebuild:

What should the torque be on a torque table?

Torque specifications are shown either as an exact figure, or a specific range. Follow any special instructions or multi-step directions carefully to assure correct final torque. There may be different specifications for different size bolts, bolts in different positions, tightening bolts in several stages, or a cold engine vs. a warm engine.

What are the specs of a 1963 Corvette?

1963 Corvette Specs Inlet Manifold Cast Aluminum Air Cleaner Type Dry Air Meter Location Engine Left Side Plenum Chamber Integral With Inlet Manifold

What are the torque specifications for a Ford Super Duty?

Brakes, Rear, caliper pin bolts – F-250/F-350 with Ford and Dana axle 27 lb/ft, 36 Nm Brakes, Rear, disc brake adapter bolts – F-250/F-350 with Ford axle 150 lb/ft, 203 Nm Brakes, Rear, disc brake adapter bolts – F-350/F-450/F-550/Motorhome with Dana axle 100 lb/ft, 135 Nm Brakes, disc, front brake caliper pin bolts (2) 42 lb/ft, 56 Nm

What are the torque specifications for a General Motors truck?

TORQUE SPECIFICATIONS GENERAL MOTORS APPLICATION FT-LBS / ( N-m) AXLE SHAFT FLANGE BOLT ‘S’ BODY CAR 27 (37) TRUCKS 60 (82) AXLE SPINDLE NUT ‘A’ BODY 192 (261) ‘C’ ‘E’ ‘H’ & ‘K’ BODIES 180 (245) ‘J’ & ‘L’ BODIES 191 (260) ‘P’ BODY 200 (271) ‘S’ BODY CAR 137 (186) ‘T’ SERIES TRUCK

What kind of torque does a Ford Mustang have?

BALL JOINT CLAMP BOLT 36 (49) LOWER CONTROL ARM PIVOT BOLT 30-33 (41-51) STABILIZER BAR BOLT FESTIVA 40-50 (54-68) TRACER 10-13 (14-18) STRUT-TO-KNUCKLE BOLTS 68-72 (90-95) TIE ROD NUT 22-33 (30-45) UPPER STRUT BOUNT BOLTS 15-18 (20-24) WHEEL STUD BOLTS 63-85 (85-115)

What are the torque values for a 2000 Ford truck?

These are torque values for a 2000 Ford truck. Most will be applicable to model years 1999-2003. Site information: This site, www.superdutypsd.com, has no affiliation with any manufacturer, vendor, forum, or other site referenced here.

How do you find torque specs for Ford vehicles?

To find specific vehicle models on Ford.com, select Cars, Crossovers and SUVs, or Trucks and Vans at the top of the page. Choose the model from the dropdown list, and click Specs. Select Engine to view all types of engines offered for the model. Torque is listed as pound-foot at a certain RPM for each engine type.

What are the torque specifications for a Ford Fiesta?

FORD (IMPORTS) APPLICATION FT-LBS / ( N-m) AXLE SHAFT FLANGE BOLTS 28-32 (38-43) AXLE SPINDLE NUT FIESTA 150-175 (205-235) ALL OTHERS 145 (197) BALL JOINT CLAMP BOLT 36 (49) LOWER CONTROL ARM PIVOT BOLT 30-33 (41-51) STABILIZER BAR BOLT FESTIVA 40-50 (54-68) TRACER 10-13 (14-18) STRUT-TO-KNUCKLE BOLTS

What kind of torque does a Ford F-150 have?

Type: Bolt 130 1560 Gen X 150/250 – FRONT Hub/Bearing Assembly Bolts (4WD) Type: Bolt 150 1800 Gen X 150/250 – Idler Arm Bracket to Frame Bolts Type: Bolt 56 672 Type: Stud 86 1032 Type: 85 1020 Gen X 150/250 – Leaf Spring FORWARD Thru Bolt Type: Bolt 86

Front Suspension Torque Specs Description Specification Stabilizer Bar Retainer Bolts 45 ft-lbs Stabilizer Bar Link Upper Nut 75 ft-lbs Stabilizer Bar Link Lower Bolt 75 ft-lbs Track Bar Frame Bracket Nut 125 ft-lbs

How much torque does a JK suspension have?

Front Suspension Torque Specs Description Specification Suspension Arm Lower Frame Bracket Nut 125 ft-lbs Suspension Arm Upper Axle Bracket Nut/Bo 75 ft-lbs Suspension Arm Upper Frame Bracket Bolt 75 ft-lbs Stabilizer Bar Retainer Bolts 45 ft-lbs

What are the torque specs on a Jeep Wrangler?

Front Suspension Torque Specs Description Specification Shock Absorber Upper Nut 20 ft-lbs Shock Absorber Lower Nut 56 ft-lbs Suspension Arm Lower Axle Bracket Nut 125 ft-lbs Suspension Arm Lower Frame Bracket Nut 125 ft-lbs