What are the torque specs for a Chevy 350 engine?

Low-End Torque Specs. Main-cap torque specification on the typical Chevrolet 350 two-bolt-main engine is 70 ft.-lbs. Specifications for the four-bolt-main are 70 ft.-lbs for the inner bolts, 65 ft.-lbs for the 7/16-inch outer bolts, and 40 ft. lbs. for the 3/8-inch outer bolts.

What kind of torque does a Chevy small block have?

900 101.69 Chevy Small Block – 7/16 in. Bolt – Rod Cap Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13 Chevy Small Block – 25-45-65 Helical Sequence Type: Distributor Clamp To Engine Block 20 240 27.12 Type: 20 240 27.12 Type: 35 420 47.45

What are the torque specifications for a GM 3.1L 191ci?

444 50.17 3100 – A/C Compressor Mounting Bolts Type: Bolt 37 444 50.17 3100 – Right Strut Mount to Engine Block Type: 35 420 47.45 3100 – Torque Strut Through Bolt Nuts Type: Bolt 43 516 58.3 3100 – Front Mount Bracket to Oil Pan Bolts Type: Bolt 8 96 10.85 3100 – Camshaft Position Sensor Bolt Type: Bolt 15 180 20.34

What are the torque specifications for a Chevy Camaro?

10.85 Gen IV – REAR Caliper Bleeder Valve Type: 43.39 Gen I/II – Front Flex Hose to Caliper Type: 40.67 Gen IV – FRONT Brake Hose to Caliper Banjo Bolt Type: Bolt 29.83 Gen IV – REAR Brake Hose to Caliper Banjo Bolt Type: Bolt 12.5 16.95 Type: 12.5 16.95 Type: Brake Master Cylinder To Power Brake Booster 32.54 Type: 32.54 Type: 13.56

What are the torque specs for a Chevy big block?

Bolt Torque Spec Chart for Chevy Big Block Chevy Fastener Type Torque Specs Main cap bolt, 396-427 2-bolt 95 ft.-lbs. Main cap bolt, 396-454 4-bolt (inner/outer) 110 ft.-lbs. 3/8 in. connecting rod bolt 50 ft.-lbs. 7/16 in. connecting rod bolt 67-73 ft.-lbs. Cylinder head bolts, long 75 ft.-lbs. Cylinder head bolts, short 65-68 ft.-lbs.

How much torque does a Chevrolet S-10 have?

4.3L-262ci-V6 Torque Specifications for Chevrolet S-10 Anti Roll/Stabilizer Bar To Axle Assembly 44 Ft-Lbs 528 In-Lbs 59.66 N-m

How big is the bolt cap on a Chevy small block?

47.45 Chevy Small Block – 11/32in. Bolt – Rod Cap Type: 45 540 61.01 Chevy Small Block – 3/8 in. Bolt – Rod Cap Type: 75 900 101.69 Chevy Small Block – 7/16 in. Bolt – Rod Cap Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13

What kind of torque does a 5.0L 305ci have?

Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13 Chevy Small Block – 25-45-65 Helical Sequence Type: Distributor Clamp To Engine Block 20 240 27.12 Type: 20 240 27.12 Type: 35 420 47.45 Type: Engine Temp Sensor To Intake Manifold 20 240 27.12

What do you need to know about torque specs?

It is important to note that most engine torque specs require 30w engine oil to get the correct stretch on the bolt. Some specialty fasteners require a specific lubricant. It is important to know which lube, if any, the bolt requires and to use it when tightening it.

What should the torque be on a torque wrench?

It is important to know which lube, if any, the bolt requires and to use it when tightening it. A torque wrench really only senses friction. For example, take a bolt with a torque specification of 50 lb ft.

Can a threaded fastener be used without torque specifications?

Without having the proper torque specifications, assembling an engine, or any threaded fastener as far as that goes, is just asking for failure. This is especially true on today’s lightweight engines that use mostly aluminum castings.

When to use a cutting torch fuel cylinder?

Cylinders should always be secured with the valve cap in place, when not in use. Cutting torch Fuel cylinders, such as acetylene, are filled to a much lower pressure, but fuel cylinders can also be dangerous if the valve assembly is damaged.

What kind of bolt is in the 2.5L torkspec?

Type: Bolt 92 1104 124.74 Iron Duke – Cylinder Head Bolts Type: Bolt Distributor Clamp To Engine Block 18 216 24.4 Iron Duke – Distributor Clamp Bolt Type: Bolt 25 300 33.9 Type: Bolt Exhaust Manifold To Cylinder Head 39 468 52.88 Iron Duke – Exhaust Manifold Bolt Type: Bolt Exhaust Pipe To Exhaust Manifold 35 420 47.45

What are the torque specifications of a GM 2.5L torkspec?

50.17 Iron Duke – Intake Manifold to Cylinder Head Type: Bolt 3.75 45 5.09 Type: Bolt 28 336 37.96 Iron Duke – Oil Screen Support Nut Type: 10 120 13.56 Iron Duke – Oil Pump to Drive Shaft Plate Bolt Type: Bolt Head: Hexagon 18

Is it dangerous to fill cutting torch with acetylene?

Cutting torch Fuel cylinders, such as acetylene, are filled to a much lower pressure, but fuel cylinders can also be dangerous if the valve assembly is damaged. Another risk to acetylene cylinders would be the creation of voids within the cylinder if it is indented or struck. Voids allow for the acetylene gas to move around more freely.

What does torque mean on a rocker arm?

The rotating lobes of the camshaft raise and lower one end of the rocker arm while the other end acts upon the poppet valve stem. Torque refers to the force required to rotate an object, in this case a nut or a bolt, around an axis or pivot.

What happens if you over tighten the torque on a Chevy 350?

If you over-tighten, the bolt threads can be severely damaged and you risk breaking a bolt off inside the head. The heads require the correct torque and tightening sequence to prevent damage to the head gasket. Again, if you over-tighten them, the bolts may be broken off inside the block.

What are the torque specs for a Chevy 350 intake?

The specifications given are for the typical 350 engine. The Chevrolet 350 cylinder-head torque specification is 65 ft.-lbs. The intake installed onto cast-iron heads requires 30 ft.-lbs.

What should main bearing caps be torqued to?

Main bearing caps on 318 engines should be torqued to between 85 and 90 lb-ft., while 360 engines should be torqued to 85. The books also specify two different types (strengths) of main bearing cap bolts. They also specify a two-step torque procedure again, as well as a specific pattern to use (Image above).

How much torque does a small block Chevy have?

Small Block Chevy Torque Specs Fastener Type Torque Spec 7/16 in. Outer Main Cap Bolt 65 ft.-lbs. 7/16 in. Inner Main Cap Bolt 70 ft.-lbs. 3/8 in. Outer Main Cap Bolt 40 ft.-lbs. 11/32 in. Connecting Rod Bolt 38-44 ft.-lbs.

What should the torque be on a 327 engine?

SBC Crank Main Caps and Rod Bolts Main bearing caps on 327 engines should be torque in two steps to between 60 and 70 lb-ft, while 350 engines should be taken to 75. These are the caps on the crankshaft. Rod caps, or rod bearing caps, should be torqued to 45 lb-ft for the 327 engine and 35 for the 350 engine.

What are the torque specs for SBC engines?

Intake manifold bolts and head studs/bolts have to be torqued in a certain pattern and to a certain torque spec in order for your engine to work properly. Intake manifold bolts on SBC engines should be torqued to 30 lb-ft in a two-step sequence.

What are the torque specs for a Chevy 350 engine?