What are the symptoms of the P2004 trouble code?
What are the symptoms of the P2004 trouble code?
What are the symptoms of the P2004 code? 1 Decrease in fuel economy. 2 Decrease in low end engine torque. 3 The engine may surge/sputter. 4 The vehicle will run rough. 5 Check Engine/Service Engine Soon Light on. 6 (1 more items)
How to find out if your car has a P2004 code?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P2004 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city.
What does OBD-II scanner error code P2004 mean?
You simply need to have the right tool to read the code. If you get an OBD-II scanner error code P2004 problem that means the intake manifold runner control actuator is stuck in the open position. This simple guide will explain exactly what that means and what you should do about it. What Does P2004 Mean?
What is the code for check engine light?
This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic for $0.0 .
What does the code P2004 mean on a car?
What does code P2004 mean? Code P2004 stands for Intake Manifold Runner Control Stuck Open Bank 1. The intake manifold directs air into the engine via a series of runners. To improve engine performance, many late-model vehicles use what’s referred to as an intake manifold runner control (IMRC) system.
How much does it cost to diagnose P2004 Ford code?
Labor: 1.0 The cost of diagnosing the P2004 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P2004 FORD code detected?
What to do if your P2004 is having trouble?
Check for poor connectors that may have been damaged too. If it does not seem to be an electrical problem. you should then check the sensors which determine whether the valve is open or closed. You can use a digital volt/ohmmeter to test the sensors. If that also turns up nothing, you should check for faulty or damaged components.
What does code p2005 mean on engine vacuum?
Note: It’s also a good idea to check the vacuum hoses on system that’s controlled by engine vacuum. P2005: Code P2005 indicates the PCM determined the bank 2 IMRC actuator is stuck in the open position. P2006: Code P2006 indicates the PCM determined the bank 1 IMRC actuator is stuck in the closed position.
