Easy lifehacks

What are the specs of a 2003 Ford Ranger?

What are the specs of a 2003 Ford Ranger?

of the 2003 Ford Ranger. Base trim shown. Body Type: Truck See similar vehicles. Combined MPG: 17-26 Combined MPG. Engine: 143-hp, 2.3-liter I-4 (regular gas) Drivetrain: 4×2. Towing Capacity: 2,240 lbs. View more specs.

When did the Ford Ranger truck come out?

The Ford Ranger truck is one of the more globaly recognizeable brands in the world. It actually traces its roots all the way back to 1958. The truck that we commonly refer to today as the Ranger began in 1983 and has undergone quite a few changes since then.

Which is the best Ford Ranger of all time?

The 10 Best Ford Ranger Models of All-Time. 10. 1988 Ford Ranger Pickup 2WD. This truck might have been made way back in 1988, but it was built to last. It is still being driven by many people 9. 2000 Ford Ranger Pickup 2WD. 8. 2003 Ford Ranger Pickup 4WD. 7. 2010 Ford Ranger. 6. 2001 Ford …

What kind of engine does a Ford Ranger have?

of the 2003 Ford Ranger. Base trim shown. Body Type: Truck See similar vehicles. Combined MPG: 17-26 Combined MPG. Engine: 143-hp, 2.3-liter I-4 (regular gas) Drivetrain: 4×2. Towing Capacity: 2,240 lbs.

What’s the price of a 2003 Ford Ranger?

TrueCar has 45 used 2003 Ford Ranger s for sale nationwide, including a XLT Appearance Supercab 4-Door 3.0L RWD and a XL Supercab 2-Door 3.0L RWD. Prices for 2003 Ford Ranger s currently range from $2,995 to $13,996, with vehicle mileage ranging from 33,663 to 244,217.

When was the last serviced 2003 Ford Ranger?

1st owner drove an estimated 13,299 miles/year • 2nd owner drove an estimated 7,447 miles/year • 3rd owner drove an estimated 6,031 miles/year. Last serviced at 137,972 miles in Durham, NC on 10/26/20 • Vehicle serviced • Maintenance inspection completed • Engine oil/fluid leak checked • Transmission range sensor checked.

When did the fifth generation Ford Ranger come out?

Since 2014 there has been an 83% increase in midsize pickup sales, and Ford’s convinced. The Ranger was rereleased in 2019. Though this is the fourth generation of Ranger in the United States, it is considered by many to be the fifth generation, since the Ranger continued to be sold from 2012-2018 in other countries outside of the United States.

How many miles does a 2003 Ford Ranger Edge drive?

1st owner drove an estimated 3,027 miles/year • 2nd owner drove an estimated 0 miles/year • 3rd owner drove an estimated 0 miles/year • 4th owner drove an estimated 13,891 miles/year • 5th owner drove an estimated 0 miles/year • 6th owner drove an estimated 0 miles/year • 7th owner drove an estimated 0 miles/year.

When did the Ford Ranger get a 3.0L engine?

(The original piston (right) was replaced in 2002 by a short-skirted design (left) that had a 3.0 mm oil groove and small dome on the top) The 3.0L engine came with a flat tappet cam from ’86 through ’91.

When did the Ford Ranger get a V6?

The Ford Vulcan V6 is a 3.0L, 60° V6 engine, first introduced for the 1986 model year and originally designed to be the optional engine in the Ford Taurus and Mercury Sable. In 1991 it became available in the Ford Ranger where it replaced the Cologne 2.9 engine (which it is not related to) as the base V6 in the Ranger

What kind of paint does a 2003 Ford Ranger get?

New Sonic Blue paint is unique to FX4 Level II Rangers. Other changes to the 2003 Ford Ranger include covered visor vanity mirrors for XLT models, standard step bars on XLT 4WD SuperCab and Edge 4WD models and minor interior trim and fabric revisions on some models. Finally, crew cab rear seats get LATCH anchors, and some new colors are available.

What kind of engine does a 2003 Ford Ranger have?

The 2003 Ford Ranger isn’t the freshest compact pickup on the market, but it has aged gracefully. We like this truck plenty, especially when equipped with the available 207-horse V6 engine.

New Sonic Blue paint is unique to FX4 Level II Rangers. Other changes to the 2003 Ford Ranger include covered visor vanity mirrors for XLT models, standard step bars on XLT 4WD SuperCab and Edge 4WD models and minor interior trim and fabric revisions on some models. Finally, crew cab rear seats get LATCH anchors, and some new colors are available.

What kind of sound system does a 2003 Ford Ranger have?

The 2002 Tremor package, with its ear-splitting 485-watt sound system, returns for 2003 as a trim level, joining XL, Edge and XLT in the lineup. A chrome appearance package for select XLT models is available, and last year’s FX4 package for four-wheel-drive Rangers is offered in two guises: Off Road and Level II.

What kind of rating does the Ford Ranger get?

The Ranger received the following grades on a scale of A-F.* * This score may not apply to all trims, especially for vehicles with multiple body styles that affect the space and design of the seating. What is a Bumper-to-Bumper warranty?

Gear Ratios 2.3L DOHC I-4 3.0L OHV V-6 4.0L SOHC V-6 4.0L SOHC V-6 Transmission 5-speed manual overdrive 5-speed automatic overdrive 5-speed manual overdrive 5-speed automatic overdrive 1st 3.72:1 2.47:1 3.72:1 2.47:1 2nd 2.20:1 1.85:1 2.20:1 1.85:1 3rd 1.50:1 1.47:1 1.50:1 1.47:1

When did the Ford Ranger get a 4.0L engine?

The 4.0L OHV (Over Head Valve) V-6 engine found its way in to the Ford Ranger in 1990 and ultimately replaced the 2.9L V-6. This evolutionary redesign of the American 2.9L solved many of the reliability issues that plagued its predecessor. A beefier cylinder head design eliminated the 2.9L’s common failure of cracked heads.

How much torque does a Ford Ranger have?

Ford Ranger 4.0L V6 Crankshaft Pulley Bolts Torque in 2 steps [1st (30-37ft-lbs), 2n Flywheel to Crankshaft Bolts 59 ft-lbs (OHV Engines) 75 – 85 ft-lbs ( Lower Intake Manifold / Throttle Body Torque in 4 steps [1st (3-6ft-lbs), 2nd Exhaust Manifold 19 ft-lbs (OHV Engines) 16 ft-lbs (SOHC

What kind of automatic transmission does a Ford Ranger have?

A4LD – The C3 was modified into the A4LD 4-speed automatic by adding an overdrive gear, which the C3 lacked. This was the first Ford automatic to use an EEC-controlled torque converter lock-up clutch. Electronic shift control for the 3–4 shift was later added, another first, though other gears remained hydraulic.

The 4.0L OHV (Over Head Valve) V-6 engine found its way in to the Ford Ranger in 1990 and ultimately replaced the 2.9L V-6. This evolutionary redesign of the American 2.9L solved many of the reliability issues that plagued its predecessor. A beefier cylinder head design eliminated the 2.9L’s common failure of cracked heads.

What kind of horsepower does a 2003 Ford Ranger have?

The 2.3-liter inline-four breathes with dual overhead cams and four valves per cylinder. For 2003, new valve timing and a new exhaust manifold have boosted its rated horsepower from 135 to 143. Torque is increased to 154 pounds-feet. An optional 3.0-liter ohv V6 is rated 154 horsepower and 180 pounds-feet of torque.

How much horsepower does a Ford Ranger XLT have?

Torque is increased to 154 pounds-feet. An optional 3.0-liter ohv V6 is rated 154 horsepower and 180 pounds-feet of torque. Ford offers this engine with flexible fuel capability, meaning it can operate on ethanol, gasoline or any combination of the two fuels in the same tank.

How many cabs does a Ford Ranger have?

Ford Ranger comes in a wide range of configurations: three trim levels, three cab configurations, three wheelbase lengths, three engine, a choice of transmissions, and is available with two-wheel drive or four-wheel drive. Buyers can also choose six- or seven-foot beds, and flat Styleside or notched Flareside fender shapes.

Why does my Ford Ranger run for a little then dies?

Next check is the fuel pressure regulator, your looking for fuel coming out the top and bleeding into the vacuum line thus flooding the engine. Another thing that happens is the distributor pickup coil can fracture, it runs good until it gets hot then it will go open and the engine stalls, and the ignition module can act the same way.

Where does the Ford Ranger engine come from?

The Vulcan was a clean-sheet design using the metric system. The engine block is built by Sherwood Metal Products, the intake comes from Ford’s Essex Casting, and the engine is assembled at Ford’s Lima Engine plant in Lima, Ohio. The Vulcan is a straightforward pushrod design, with 2 valves per cylinder. Bore is 3.504 in and stroke is 3.15 in.

The Ford Vulcan V6 is a 3.0L, 60° V6 engine, first introduced for the 1986 model year and originally designed to be the optional engine in the Ford Taurus and Mercury Sable. In 1991 it became available in the Ford Ranger where it replaced the Cologne 2.9 engine (which it is not related to) as the base V6 in the Ranger

Author Image
Ruth Doyle