What are the parts of a RICON wheelchair lift?
What are the parts of a RICON wheelchair lift?
IV. PARTS DIAGRAMS AND LISTS his chapter contains parts diagrams and parts lists for the RICON S-Series Personal Use Wheelchair Lift. An exploded view of each major lift assembly shows individual components and assemblies referenced by num- bers.
How to troubleshoot a hydraulic wheelchair lift not deploying?
Hydraulic Wheelchair Lift Will Not DEPLOY 1 Start The Vehicle 2 Verify Hand Pendant Power Is ON 3 Verify The Interlock Is Set, Vehicle Ignition ON, Emergency Brake Set & Lift Power ON 4 Make Sure The Breaker Did Not Release – Commonly Located Under The Hood Next To Battery – Reset If It Did Release
What to do if your wheelchair lift solenoid fails?
If the thin clip is disconnected from either the spring or solenoid post re-attach them together. Once you have them re-connected push the deploy button on the hand pendant to see if the solenoid activates. If you still have no action, it is possible the solenoid has failed and will need to be replaced.
What happens when you turn the Handel on a wheelchair lift?
Turn the handel 1/4 counter clockwise and it will start to deploy to floor height. When you turn the handel clockwise you will tighten the t post and the lift wil stop. Open the t post untill the lift is at floor level and tighten back to stop lift for loading on to the wheelchair platform.
How does the deploy work on a RICON wheelchair lift?
Push the deploy on the hand pendant, Ricon wheelchair lifts have a stow lock solenoid that keeps it from drifting out into the doors or if pressure is lost it keeps the lift from rapidly dropping to the ground possibly injuring individuals. When you push deploy you should hear the solenoid clicking and releasing.
Is there a wheelchair lift for a bus?
he RICON S-Series Transit Use Wheelchair Lift provides wheelchair access to vans and buses. The patented movement provides smooth, safe entry and exit and easily lifts up to 800 pounds (certain de -rated models lift 660 pounds). It is to be operated by a trained attendant. The lift contains a powerful electro-hydraulic pump
If the thin clip is disconnected from either the spring or solenoid post re-attach them together. Once you have them re-connected push the deploy button on the hand pendant to see if the solenoid activates. If you still have no action, it is possible the solenoid has failed and will need to be replaced.
