Easy lifehacks

What are the most common LMM Duramax engine problems?

What are the most common LMM Duramax engine problems?

1 DPF system & active regeneration 2 Leaking transmission lines 3 Fueling / low fuel pressure 4 Piston / crankshaft failure 5 Allison 1000 power limitation

Why is my Duramax 6.6L engine not working?

Overtime, both of these parts are prone to normal wear and tear which can reduce fuel rail pressure. Injectors can get clogged or the fuel pump can simply weaken. As mentioned, this is most common when its hot and when towing heavy which requires the engine to work harder and therefore more fuel to be used.

What causes a Duramax injection pump to fail?

As a result (allegedly), the lack of lubrication in the fuel can cause a premature failure of the injection pump, to a point where it won’t allow the LML Duramax to run. You can be driving down the road and everything seems normal, and when the pump fails, the truck just shuts off.

What causes a Duramax diesel engine to heat up?

When the engine is working hard, the turbocharger is drawing in a ton of air, and the restrictive stock turbo inlet tube can effectively choke the VGT turbocharger causing the compressor outlet temperature to skyrocket, heating up the intercooler, and ultimately raising the temperature of combustion and the coolant temp.

1 DPF system & active regeneration 2 Leaking transmission lines 3 Fueling / low fuel pressure 4 Piston / crankshaft failure 5 Allison 1000 power limitation

As a result (allegedly), the lack of lubrication in the fuel can cause a premature failure of the injection pump, to a point where it won’t allow the LML Duramax to run. You can be driving down the road and everything seems normal, and when the pump fails, the truck just shuts off.

What happens when a Duramax engine goes down?

Not only does this mean game-over for the engine, but it results in a truck that’s down for weeks (if not months) and a huge chunk of change missing from your wallet. The failure is most common in higher horsepower engines, but can still occur in moderately modified and even stock power plants.

When did the LMM diesel engine come out?

Following the LBZ being phased out in mid-2007, the LMM Duramax took its place as Chevy & GMC’s diesel truck engine. Following the same 6.6L powerplant, the LMM was introduced due to continuously increasing diesel emissions regulations and lasted until 2010 when it was phased out for the LML.

Are there any problems with the LLY Duramax?

In terms of LLY injector problems, GM had sorted out the internal failures with the 2004 ½ redesign, but the LLY Duramax would occasionally exhibit a trouble code for the injectors, but in most cases it turned out to be an issue with the injector harness rubbing through and causing a short or open in the wiring.

Is the LMM engine a hot spot for failure?

Consistent to its very similar LBZ counterpart, the LMM is a highly reliable engine. The DPF is a hot-spot for failure so beware that you will probably end up with a few thousand dollars of DPF/emissions repairs, however you can *illegaly* remove this potential problem by removing the DPF system.

Following the LBZ being phased out in mid-2007, the LMM Duramax took its place as Chevy & GMC’s diesel truck engine. Following the same 6.6L powerplant, the LMM was introduced due to continuously increasing diesel emissions regulations and lasted until 2010 when it was phased out for the LML.

Which is the best tuner for LMM Duramax?

Review of the Best Tuners for LMM Duramax. 1 2. Bully Dog GT Platinum Diesel Tuner. CHECK PRICE. PROS. 2 3. Bully Dog BDX Performance Programmer. 3 4. SCT 40490 BDX Performance Programmer. 4 5. Duramax Tuner Jack Series SPADE Tuning Device.

Consistent to its very similar LBZ counterpart, the LMM is a highly reliable engine. The DPF is a hot-spot for failure so beware that you will probably end up with a few thousand dollars of DPF/emissions repairs, however you can *illegaly* remove this potential problem by removing the DPF system.

What to do if your Duramax engine is leaking?

These problems can be prevented by ensuring you are driving your Duramax on the highway enough and being cautious of not interrupting the regeneration process while its taking place. Using a fuel additive such as AMSOIL Diesel Concentrate can help the fuel burn cleaner and therefore reduce particulate build-up. 2. Leaking Transmission Lines

What causes a transmission line to leak in a Duramax?

LMM Leaking Transmission Line Symptoms 1 Overheating transmission temps 2 Red fluid dripping underneath the car 3 Hard shifting

What causes a coolant leak in a Duramax engine?

Failure to inspect the EGR cooler for leaks may lead to a misdiagnosis for coolant entering the combustion chamber. Previously, An EGR cooler pressure tester adapter set, EN-48974, was shipped essential to dealers in December 2007 to diagnose EGR cooler engine coolant leaks on all Duramax™ engines equipped with an EGR system.

Can a head gasket failure cause engine coolant loss?

The AERA Technical Committee offers the following information on engine coolant loss on 2002-2016 GM 6.6L Duramax diesel engines. It is important to note that not all instances of coolant loss on these engines is the result of head gasket failure.

What is the low fuel pressure code on a Duramax LBZ?

Duramax LBZ and LMM P0087 Low Fuel Pressure code Summer comes, temps rise, and the working trucks with relatively high miles start to set a P0087 code and go into limp mode while towing.

What’s the fuel milage on a Chevy Duramax?

So my truck (2500 CCSB 4×4) is very speed dependent for decent mileage. If I keep a calm foot on the skinny pedal, I can keep it in the low 20’s without trying hard. But as I get into the upper end of the speed range, the economy takes a dive and will cost at least 5mpg or more.

Overtime, both of these parts are prone to normal wear and tear which can reduce fuel rail pressure. Injectors can get clogged or the fuel pump can simply weaken. As mentioned, this is most common when its hot and when towing heavy which requires the engine to work harder and therefore more fuel to be used.

These problems can be prevented by ensuring you are driving your Duramax on the highway enough and being cautious of not interrupting the regeneration process while its taking place. Using a fuel additive such as AMSOIL Diesel Concentrate can help the fuel burn cleaner and therefore reduce particulate build-up. 2. Leaking Transmission Lines

Author Image
Ruth Doyle