Is there a way to jump start a Chevy Equinox?
Is there a way to jump start a Chevy Equinox?
This can be magnified if your battery is already weak. Jump-starting your Equinox can provide the power needed to start the vehicle and get you on the road. Pull the vehicle that will be providing the jump-start close enough to your Equinox so the jumper cables will be able to reach both vehicles’ batteries.
Why does my Chevy Equinox have a dead battery?
The Chevy Equinox is a four-door crossover SUV that was first produced for the 2005 model year. If you find yourself in a situation where you turn the key and nothing happens, odds are you have a dead battery. This can happen because the battery is old or you left the lights on when the car was off, which drained the battery.
Why does my Chevy Equinox not shift out of Park?
The Equinox shift interlock system is designed to prevent the driver from shifting out of park without pressing the brake pedal first. When the system fails, you may be able to start the vehicle but you can’t shift out of park. This article is written for the Chevrolet Equinox, but is common to many GM vehicles, SUV’s and trucks
Where is the negative terminal on a Chevy Equinox?
Locate the remote jump-starting system’s negative terminal. It is close to the engine oil dipstick and is marked with a negative sign. Connect one end of the positive jumper cable to the positive terminal on the battery of the car that is providing the jump.
Where are the jumper cables on a Chevy Equinox?
The remote negative (−) terminal (2) is a stud behind the metal tab stamped with GND (−) near the driver side strut tower. 6. The jumper cables should be in good working condition with no loose or missing insulation. The vehicles could be damaged if they are not.
What should I use to jump start my Chevy Equinox?
Use a remote negative (−) terminal if the vehicle has one. Do not let the other end touch anything until the next step. The other end of the negative (−) cable does not go to the dead battery. It goes to a heavy, unpainted metal engine part or to a remote negative (−) terminal on the vehicle with the dead battery.
Is it dangerous to connect a jumper cable to a car battery?
Connecting jumper cables improperly is not only dangerous but will prevent a successful jump-start, even if the battery hasn’t completely discharged. And all jumper-cables are not made the same.
Why does my car battery not charge after a jump?
Alternator: If your battery still won’t start even after a jump, the alternator could be the culprit. The alternator is responsible for sending energy back to the battery. If it needs to be replaced, you’ll know when your battery won’t hold a charge.
