Easy lifehacks

Is ATF and dexron 3 the same?

Is ATF and dexron 3 the same?

“ATF +3” is the same as “ATF TYPE III”? ATF+3 /ATF type 111 is a aftermarket fit all for the cry 5156 fluid. And should not be used where dexron 3 /mercon /dexron is required.

What kind of transmission fluid does a Dodge Durango use?

Dexron VI
Oil Type: Dexron VI. Volume: 1 Quart.

What ATF is compatible with dexron 3?

Dexron VI fully replaces Dexron III and prior evolutions of the Dexron fluids. GM manufactured the liquid for compatibility with transmissions requiring earlier versions of the fluid. Dexron VI works in any vehicle that requires ATF-A (the original automatic transmission fluid) or a Dexron variation.

Can you use Dexron VI with ATF + 4?

ATF +3 and 4 are compatible. +4 is meant to not break down as quickly as +3 mainly. Dex 3 and 6 are also compatible for similar reasons. IMHO, I would swap all of the fluid out for +4. This would mean a complete swap, otherwise you are just going to be mixing the two fluids up and not really getting anywhere.

What kind of transmission fluid does A Dexron use?

I should mention that I checked the fluid with a fully warmed engine idling in neutral. It should have ATF+4 installed. Many trans shops use dexron as their only fluidl. The reason is Chrylser trannies are suck a small % of their business they can’t justify stocking the higher priced ATF+4 also. They have learned it works to get it out of shop.

Do you need ATF + 4 fluid in a Dodge?

Chrysler takes the characteristic of fluid in consideration when calibrating shifts. Not only is the fluid a synthetic (near perhaps) but the additive package consists of superiour materials that last longer or survive higher temps for longer periods of timel JMHO of course. It should have ATF+4 installed.

Can A Dexron 6 be swapped for a Dex 3?

Dex 3 and 6 are also compatible for similar reasons. IMHO, I would swap all of the fluid out for +4. This would mean a complete swap, otherwise you are just going to be mixing the two fluids up and not really getting anywhere. The manual does say that the TRANSFER CASE (as you realized) can take either or.

Do you need ATF + 4 fluid for Dexron?

Not only is the fluid a synthetic (near perhaps) but the additive package consists of superiour materials that last longer or survive higher temps for longer periods of timel JMHO of course. It should have ATF+4 installed. Many trans shops use dexron as their only fluidl.

Is the Dexron VI backwards compatible with ATF + 3?

Based on the label on the two bottles, I’m assuming that Dexron VI is backwards compatible for Dexron III applications, and that the same would be true when comparing ATF+4 with ATF+3.

Chrysler takes the characteristic of fluid in consideration when calibrating shifts. Not only is the fluid a synthetic (near perhaps) but the additive package consists of superiour materials that last longer or survive higher temps for longer periods of timel JMHO of course. It should have ATF+4 installed.

Dex 3 and 6 are also compatible for similar reasons. IMHO, I would swap all of the fluid out for +4. This would mean a complete swap, otherwise you are just going to be mixing the two fluids up and not really getting anywhere. The manual does say that the TRANSFER CASE (as you realized) can take either or.

Author Image
Ruth Doyle