How to start a 1977 Dodge motor home?

Remove the PCV valve from the valve cover and allow it to draw underhood air. Connect a tachometer to the engine, start engine and let speed stabilize for two minutes. Remove and plug the vacuum hose from the computer. Connect an auxiliary vacuum supply to the computer and apply 16 in.Hg.

What makes a 1977 Dodge motor home not idle?

I have a 1977 dodge motor home with a 360 engine. It will not idle. I have changed the intake gaskets, did not work, then the head gaskets did not work. I have checked the fuel filter and pump working great. It will just not idle, the minute I let off the gas it stalls.

Why does my Dodge engine stall when I start the car?

Other causes may be bad or worn out components in the ignition secondary system, causing the engine to accelerate poorly and even stall. These steps will help you inspect these components and solve the hesitation problem on your Dodge vehicle.

How can I tell if my Dodge engine is still running?

If you do not have the schematic for your particular vehicle, check the three wires at the sensor. The other lead on the meter should touch your vehicle ground. The voltage that remains steady as you manually open and close the throttle is your supply wire. You should read about 5 volts.

How to turn off a Dodge motor home?

Turn off engine and remove tachometer. Disconnect and plug vacuum hose at the EGR valve. Ground the carburetor switch with a jumper wire. Disconnect and plug the 3/16″ diameter hose at the canister and remove the PCV valve from the valve cover and allow it to draw underhood air.

How to energize a Dodge motor home engine?

Ground the carburetor switch with a jumper wire. Disconnect and plug the 3/16″ diameter hose at the canister and remove the PCV valve from the valve cover and allow it to draw underhood air. Connect a tachometer to the engine, start engine and let stabilize for two minutes. Energize the solenoid by one of the following methods:

How to start a 1977 Dodge motor home?