How to reset the oil change light on a 2001 Chevy Silverado?

Insert your key into the 2001 Chevy Silverado ignition. Turn your key two clicks forward into the RUN position. Verify that your dashboard lights, radio and odometer turn on. Your 2001 Chevy Silverado engine should not start. Push and release the accelerator pedal fully three times within five seconds while monitoring the dashboard lights.

When to change the oil in a Chevy Silverado?

When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. Check the engine oil level regularly, every 650 km (400 mi), especially prior to a long trip. The engine oil dipstick handle is a loop.

How to reset Chevy Silverado 1500 Classic LS?

Chevrolet Silverado 1500 Classic LS: To reset the oil change…. Fully push and release the accelerator pedal 3 times within 5 seconds. If the “Change Oil Soon” light flashes, the system is resetting. Start the vehicle. The oil life will change to 100%. If the Change Oil Soon light comes back on, the system has not reset. Repeat the procedure.

Where is the oil plug on a Chevy Silverado?

The oil pan is located directly underneath the engine, and the drain plug/bolt is located on the back of the oil pan facing the rear of the truck. Place a drain pan underneath the drain plug, and loosen the plug using an adjustable wrench. Then quickly remove the drain plug with your hand, and let the oil drain into the pan.

To reset the oil change light on my 2001 silverado, I turned the key to the on position, without starting the truck, and hit the gas pedal 3 times. The battery light only flashed once. The oil change light stays on. What to do next? Submitted:9 years ago.

Why do I need to change the oil in my Chevy Silverado?

Engine oil circulates through your truck’s engine, keeping its grinding gears as well as other moving components well-lubricated and cooled down. Over time, oil loses its ability to absorb heat and it picks up particles from normal engine wear, meaning that an oil change is more than necessary.

How to reset the change oil message on a Chevrolet?

Press and hold the “Reset” button on your information center (check mark symbol) until the “Oil Life” display changes to 100 percent. Turn your ignition to position “A” (Lock/Off). 2002 to 2006 Chevrolet Silverado. Insert your key into the ignition, and turn it to position “A” (Run/On) without cranking the engine.

How do you change the oil in a Chevy?

For second generation models (2007-2013): Step 1: Insert key into the ignition and turn the vehicle to the “ON” position. Do this without starting the vehicle. Step 2: Press the accelerator pedal to the floor three times within five seconds. The “CHANGE OIL SOON” light should begin to flash, which means the system is resetting.

How do I reset the oil soon light?

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the “Change Oil Soon” light flashes, the system is resetting. Start the vehicle. The oil life will change to 100%. If the Change Oil Soon light comes back on, the system has not reset. Repeat the procedure.

How do you check the oil life on a Chevy?

For third generation models (2014-2015): Step 1: Insert key into the ignition and turn the vehicle to the “ON” position. Do this without starting the vehicle. Step 2: Press the left arrow button on the right side of the steering wheel. Step 3: Select the “INFO” option. Step 4: Scroll up until you find “OIL LIFE” and select it.

How can I fix the Shake on my Chevy Silverado?

Just put a dial gauge on a good sturdy mount or base with the back wheels raised and watch the dial indicator as the driveshaft is rotated by hand. You could check it yourself with it still in the truck.

How much does it cost to fix Chevy Shake?

It was so bad you could obviously see it when spinning so he trued it and now my truck runs as smooth as glass with no shake, no shimmy, no vibration, nothing, it’s never driven this good ever. So take your driveshaft out and have it checked. BTW it only cost me $86.00

How to change the oil in a 2001 Chevy Silverado?

Your 2001 Chevy Silverado engine should not start. Push and release the accelerator pedal fully three times within five seconds while monitoring the dashboard lights. Verify the behavior of the change oil soon light. If the change oil soon light flashes two times, the system is reset.

Where is the oil change light on a Chevy Silverado?

After just having your 2001 Chevy Silverado’s oil changed, you notice that the oil change light—located on your truck’s dashboard—is still lit, reading “change oil soon”. This may occur whether you have your Chevy Silverado’s oil changed at the dealership or have changed the oil yourself.

How to reset the oil soon light on a 2001 Chevrolet?

Push and release the accelerator pedal fully three times within five seconds while monitoring the dashboard lights. Verify the behavior of the change oil soon light. If the change oil soon light flashes two times, the system is reset. If the change oil soon light comes on and remains lit for five seconds, the system has not reset.

How to reset the oil change light on a 2001 Chevy Silverado?