How to reset oil soon light on Chevy Avalanche?
How to reset oil soon light on Chevy Avalanche?
Reset Change Oil Soon Light on Chevy Avalanche: 2007-2013. Turn ignition switch to ON position with engine off. Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset”. Press and hold the SET button until the display reads “100 percent”. You will hear 3 chimes and the “Change Engine Oil Soon” message will go off.
Why does my Avalanche have a low oil pressure light?
If your Avalanche’s sensor has gone bad, it’ll shoot a false low pressure reading to the ECM. One of the first things that people do when they have the low oil pressure light is to change out this sensor to see if that rectifies the problem. Here’s a good article on how to check the oil pressure sensor from itstillruns.
Why did I Lose Oil pressure on my Chevy 5.3L?
Hello – since you didn’t appear to be leaking oil in a significant way (busted oil line, hole in the pan), I suspect that the oil pressure relief valve may have been stuck in the “relief” position. Some of the early 5.3l engines had trouble with this – galling in the pressure relief valve bore.
When to reset the olm system on a Chevrolet?
Chevrolet recommends these scheduled maintenance items throughout the life of the vehicle as well: After your oil change and servicing is complete, you might need to reset the OLM system in your Chevrolet. There are two options for first generation and second generation models. Learn how to do this by following the directions below:
Reset Change Oil Soon Light on Chevy Avalanche: 2007-2013. Turn ignition switch to ON position with engine off. Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset”. Press and hold the SET button until the display reads “100 percent”. You will hear 3 chimes and the “Change Engine Oil Soon” message will go off.
If your Avalanche’s sensor has gone bad, it’ll shoot a false low pressure reading to the ECM. One of the first things that people do when they have the low oil pressure light is to change out this sensor to see if that rectifies the problem. Here’s a good article on how to check the oil pressure sensor from itstillruns.
What causes low oil pressure on a GM 5.3L engine?
GM has encountered numerous oil pump failures with the 5.3L engines produced from 2007-2013, resulting in a loss of oil pressure due to sticking pressure regulating valves. On these engines, the oil pump is mounted on the front of the engine and is driven off the crankshaft at twice the speed of a camshaft driven pump.
How does the maintenance light reset at an oil change?
Turn ignition switch to ON position with engine off. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key. Change Oil lamp will flash for 2-10 seconds while it resets. Once it stops flashing, the maintenance light reset is complete.
