How to replace the serpentine belt in a Dodge Ram?

Disconnect the negative battery terminal. Because the electric fan can start even without the vehicle running, some mechanics suggest disconnecting the battery terminal while working in the serpentine belt area. Locate the serpentine belt tensioner pulley. The belt tensioner pulley will have a bolt on its side.

What kind of belt does a Dodge Ram have?

The main drive belt or serpentine belt is important on any vehicle, but some have more than one belt to drive components from the crankshaft. The Dodge Ram and similar truck models have one true serpentine belt, a multi-ribbed belt that fits into grooves on various pulleys, that Dodge suggests inspecting for wear every 15,000 miles or 12 months.

Why does the serpentine belt come off in snow?

I HAVE A 1998 DODGE CARAVAN AND THE serpentine belt comes off in snow or when you hit a puddle! Well after having this happen to me several times I found the reason for it is very well known by the dealerships. Matter of fact in there repair manuals there is a quick fix and the part is only $38.50 plus installation.

Where is the belt routing on a Dodge Charger?

Dodge generally includes a belt routing diagram on the upper radiator panel or a similar spot under the hood. Rotate the tensioner again to allow the new belt to slip onto all pulleys. Check to make sure it is seated right on all pulleys with the ribs in the grooves. Re-connect the battery terminal.

How do you install a new engine belt?

Rotate the tensioner again to allow the new belt to slip onto all pulleys. Check to make sure it is seated right on all pulleys with the ribs in the grooves. Re-connect the battery terminal. Run the engine and observe the belt for proper functioning.

How do you replace serpentine belt on Dodge Ram?

Turn the tensioner clockwise as if tightening the bolt to release tension on the belt. While holding the tensioner away from the belt with one hand, slide the loosened belt off of the tensioner pulley.

What kind of belt does a Dodge Ram use?

The development of the serpentine belt (sometimes referred to as a multi-rib or poly-v belt) has allowed engineers to not only reduce the amount of space necessary to drive the accessories, but to increase belt life.

How do you change the belt on a 6.7 Cummins?

Once you’ve guided the belt over all the pulleys, slip it over the tensioner and then rotate the tensioner counterclockwise back into place. Redo the bolt. Now all that’s left is to replace the airbox. Replacing the belt isn’t terribly difficult. It requires about 30 minutes of time and focus.

Where can I buy 1999 Dodge body parts?

RockAuto ships auto parts and body parts from over 300 manufacturers to customers’ doors worldwide, all at warehouse prices. Easy to use parts catalog. 1999 DODGE Parts | RockAuto

How to disable the seat belt alarm on a Dodge Ram?

Fasten and unfasten your safety belt three times within one minute of turning the vehicle to the “on” position. Then fasten the seat belt one last time. Turn the key to the “lock” position. You should hear the bell chime one time. This is an indication that the Ram’s BeltAlert system has been turned off.

How do you change the belt on a Cummins diesel?

Look at diagram and route belt through pulleys fairly easily, pulling belt up to where the tensioner pulley should be. 6. Pop belt off of AC or Crankshaft 7. Re install tensioner with belt on the proper side. 8. Go back underneath and release tensioner pulley with ratchet and slip belt onto bottom pulley. 9. Replace air box.

When to replace fan belt on 2012 Dodge Ram?

REPLACE FAN BELT ON 2012 DODGE RAM 1500 5.7 SERPENTINE BELT. NEED TO REPLACE AND NEED A DIAGRAM. WE ARE FIXING IT OUR

Can a serpentine belt be replaced on a Dodge Durango?

An expert that got 5 achievements. Re: REPLACING A SERPENTINE BELT ON A 2012 DODGE RAM 1500… My info showed this. You can’t post conmments that contain an email address. I have a 2012 Dodge Durango RT. I just had an exhaust manifold leak repaired two weeks ago and now there’s a hissing sound in the engine area again.

What’s the problem with my 2012 Dodge Durango?

You can’t post conmments that contain an email address. I have a 2012 Dodge Durango RT. I just had an exhaust manifold leak repaired two weeks ago and now there’s a hissing sound in the engine area again. Anyone know what’s happening?

How to change the serpentine belt on a 6.7 Cummins?

To start, pop the hood and locate where the belt sits. It should be easy to find as it snakes around several components. Next, release the tensioner from the A/C pulley, then remove the airbox. Undo one bolt and release the tensioner. Rotate it clockwise to move it out of the path.

Where do I find the serpentine belt on my car?

To access the serpentine belt, you will need to open the hood of the vehicle. The hood release can usually be found near the door on the driver’s side of the vehicle. With the hood released, you will also need to release the safety latch located at the front of the vehicle.

Where do I find the serpentine belt routing diagram?

Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.

What’s the best way to replace a serpentine belt?

Auto tensioners have either a hole that will fit a half inch drive ratchet, or a bolt you can use a socket to apply pressure to. Insert the wrench or place the socket over the bolt on the tensioner and twist it away from the belt to relieve the tension on it.

When to replace serpentine belt on Dodge Avenger?

Replacing the serpentine belt or even the tensioner can solve a squealing or chirping noise that occurs on startup, when the AC is engaged or even when a power steering load is placed on the pump. The Dodge Avenger has a notorious issue with the alternator decoupler pulley.

When to replace a broken serpentine engine belt?

Using a gauge to check for belt wear (Image courtesy of tradetrucks.com) Have the belt replaced whenever a related component is replaced (a broken belt is often associated with a damaged or seized pulley on one of the engine accessories).

What is belt routing diagram for Dodge 5.7 Hemi Fixya?

An expert that got 5 achievements. Just for fun, look at the underside of the hood. Sometimes there is a diagram there. Otherwise figuring it out is sort of like a logical jigsaw puzzle. Grooved side in goes on outside of crank and driven pulleys. Smooth side out and goes on inside of idler pulleys and tensioner pulleys.

What are the consequences of a serpentine belt?

The serpentine belt is responsible for turning all of them. Consequences of a Worn Belt. The serpentine belt may not be prone to breaking, but it does wear out over time. When a serpentine belt wears – or if the belt becomes damaged or contaminated – the engine accessories may not be able to spin at the proper speed.

How do you remove a serpentine belt from a car?

Pull the belt off of the pulleys. With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine. If the belt is severely damaged, be sure to remove any parts that may have come off of it as well.

When did Dodge stop making the Dodge Spirit?

Spirit production ended on December 9, 1994, along with the Plymouth Acclaim and it was marketed through 1995. The ” cab-forward ” Stratus was introduced as a replacement. The Spirit could accommodate six people with an optional front split-bench seat. It had a large trunk, a solid-beam rear axle, and a MacPherson strut front suspension.

What kind of transmission does Dodge Spirit have?

All the Spirit R/Ts came with the A-568 heavy-duty 5-speed manual transmission. From 1989 to 1991, all V6 Spirits came with the electronic four-speed A604 overdrive automatic, which became optional equipment in 1992 and remained optional until 1995.

What kind of brakes does a Dodge Spirit have?

The only transmission was a heavy-duty A568 5-speed manual transmission built by Chrysler’s New Process Gear division, with a gearset supplied by Getrag. Heavy-duty vented four wheel disc brakes were standard equipment, with optional anti-lock brakes. Color-keyed 15-inch alloy wheels were standard, with P205/60R15 tires.

When did the overdrive come out on Dodge Spirit?

From 1989 to 1991, all V6 Spirits came with the electronic four-speed A604 overdrive automatic, which became optional equipment in 1992 and remained optional until 1995. The three-speed Torqueflite automatic was the most popular installation on 4-cylinder Spirits, and was also standard equipment with the V6 engine from 1992 through 1995.

What happens if a serpentine belt goes bad?

The serpentine belt in most modern vehicles transfers power from the crank pulley to the various accessories mounted on the engine. A worn or damaged serpentine belt can fail to adequately transfer the power, leaving your alternator, power steering, and air conditioning failing to function.

How much does it cost to replace a belt on a Dodge Ram 1500?

The average cost for a Dodge Ram 1500 serpentine belt replacement is between $122 and $136. Labor costs are estimated between $52 and $65 while parts are priced at $70. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How to remove serpentine belt 09-19 Ram 1500?

If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: DJR4zxWyDoQfcAZj)

How often do serpentine belts need to be replaced?

The belt should be inspected as soon as is convenient to protect against becoming stranded. How often do serpentine belts need to be replaced? Replacement intervals vary by vehicle and driving conditions. We typically see this part replaced approximately every 100,000 miles.

Where is the tensioner on a Dodge Ram?

On some Dodge Ram models, the tensioner is directly below the air conditioner compressor pulley; look for it above the crankshaft pulley. Rotate the tensioner pulley by turning the bolt, either with a wrench for some models or a breaker bar or ratchet for other models. Slip off the belt and let the tensioner return to its position.

How to replace the serpentine belt in a Dodge Ram?