How to decipher the error codes on bobcat?

Deciphering the error codes Bobcat 01-16 Air filter not connected 02-16 Hydraulic pressure filter not connected. 02-17 Clogged hydraulic pressure filter 03-11 Extremely high battery voltage 03-14 Extremely low battery voltage 03-22 The battery voltage is below the maximum allowable

What does 01-17 mean on a bobcat?

It indicates “Low battery voltage”. When your Bobcat equipment is using a rechargeable battery, make sure there is still enough power to run the machine. If the power is low, recharge the battery as soon as possible. 01-17 is the error code to indicate “air filter clogged”.

What does 03-09 mean on a bobcat battery?

The error code of 03-09 is one of the most common codes that you will encounter. It indicates “Low battery voltage”. When your Bobcat equipment is using a rechargeable battery, make sure there is still enough power to run the machine. If the power is low, recharge the battery as soon as possible.

What are the warning signs on a bobcat?

HP – Hydraulic Oil Pressure -1 – Shutdown (Engine can be restarted for 30 second periods to move loader) -2 – Warning The versatile Bobcat quickly turns into a multijob machine with a tight-fit attachment hook-up …etc from bucket to grapple to pallet fork to backhoe, and a variety of other attachments.

What does service code mean on Bobcat skid steer?

SERVICE CODES Means System Error (See Your Bobcat Dealer For Service) LOADER Button is pressed. LOADER Button is pressed. Seat Bar is down. Seat Bar is up. Lift and tilt functions will not operate. Seat Bar sensor circuit shorted to battery voltage*. Seat Bar is down. Seat Bar is up. Lift and tilt functions will not operate.

Where do I find the fault code on my Bobcat?

First select your vehicle and then find the fault code in that page. Although we try our best to provide our visitors with the most accurate information that we can find about your skid steer, we cannot be held responsible for any errors. Bobcat is equipped with a universal skid steer quick hitch.

When to shut down a bobcat for low oil pressure?

03-22 The battery voltage is below the maximum allowable 04-09 Low engine oil pressure 04-14 Extremely low engine oil pressure 04-15 Engine oil pressure at the level of emergency engine shutdown

What do you need to know about Bobcat error codes?

Error codes of mini loaders Bobcat will help you identify the faulty actuator and quickly repair the failed mechanism of both internal combustion engine and hydraulic system Signal PWM Controller front additional. Hydraulics at the upper limit of the range PWM Controller front additional.

03-22 The battery voltage is below the maximum allowable 04-09 Low engine oil pressure 04-14 Extremely low engine oil pressure 04-15 Engine oil pressure at the level of emergency engine shutdown

What should the oil temperature be in a bobcat?

07-10 High hydraulic oil temperature 07-11 Extremely high oil temperature in the hydraulic system 07-15 Oil temperature in the hydraulic system at the level of emergency engine shutdown 07-21 Oil temperature in the hydraulic system is above the maximum permissible 07-22 Oil temperature in the hydraulic system is below the maximum allowable

What is the PWM controller code for a bobcat?

12-23 PWM controller front ext. non-neutral hydraulics 13-05 Fuel holding solenoid retainer shorted to battery 13-06 Retention fuel cut-off solenoid shorted to ground 14-02 Fuel Cut-Off Solenoid Solenoid Incorrectly Switched On

How is the solenoid closed on a bobcat?

16-06 The holding solenoid of blocking of thrust is closed on weight 16-07 Breaking the chain retaining solenoid blocking traction 17-05 Solenoid hydraulic shut-off valve shorted to battery 17-06 Solenoid hydraulic shut-off valve shorted to ground

What is the hydraulic pressure on a bobcat?

04-22 The engine oil pressure is below the maximum allowable 05-09 Low make-up pressure in hydraulic system 05-14 Extremely low make-up pressure in the hydraulic system 05-15 Feed pressure in hydraulic system at the level of emergency engine shutdown 05-21 Recharge pressure in hydraulic system is higher than maximum permissible

What’s the low hydro pressure code on a bobcat?

Discussion in ‘ Skid Steers ‘ started by jljr42, Jan 24, 2010 . 2005 bobcat t190 705 hours, low hydrostatic pressure code 05-09 and extremely low code 05-14, 05-15 followed by engine shut down. only does it at idle which is 1150 rpm. quits doing it at 1300 rpm.

Do you need to know the bobcat fault code?

You need to know the most common Bobcat fault code list because when you are using Bobcat, usually the Bobcat fault code list will appear on display. Those who use Bobcat tractors, excavators, and other types of heavy machinery and encounter error codes every once in a while.

What does the error code 03-09 mean on a bobcat?

Error codes indicating that there is something wrong with the equipment or machine you are using. The error code of 03-09 is one of the most common codes that you will encounter. It indicates “Low battery voltage”. When your Bobcat equipment is using a rechargeable battery, make sure there is still enough power to run the machine.

Is the oil pressure sensor on a bobcat connected?

Shutdown, No Coolant Warning, High Engine Temperature Engine Oil Pressure Sensor Wiring Not Connected (See Operation & Maintenance Manuals for complete listing of codes)

What does the error code m2303 mean on a bobcat?

The error code of M2303 indicates that there is something wrong with the rear base solenoid. Usually it is the problem of unexpected shutdown on this particular part. There is front and rear solenoid on the machine.

What is the problem with the bobcat S300?

We are having a problem with the bobcat s300 that we have. You start it up and seconds after that the tilt/lift light comes one. ACS error. The reference guide just says acs error tilt/lift. We noticed it was a bit damp under the cab so we took the cab back and left it inside all weekend with a fan on it in a heated shop.

Is there a problem with my Bobcat 753?

Discussion in ‘ Skid Steers ‘ started by wayne186, Jan 6, 2008 . I have a problem that I hope somebody can help me with, I have a Bobcat Advantage series 753 and it refuses to move. Engine starts fine but if I try to move it forward or backwards it will only go an inch or so and locks.

What’s the voltage on a bobcat Traction Lock?

The lock engages seconds after i disengage it after starting the bobcat. I have check the voltage at the solenoid – it is 7.5v instead of the required 12v. I’ve checked all visible wiring and it is in good shape – when I bought the bobcat, the wiring harness had been replaced. The fuses, relays, connections etc all appear good.

What kind of company is Bobcat Genuine Parts?

By continuing to use this site without changing your settings, you are agreeing to our use of cookies. Bobcat is a Doosan company. Doosan is a global leader in construction equipment, power and water solutions, engines, and engineering, proudly serving customers and communities for more than a century.

Which is the most popular Bobcat truck model?

Bobcat fault codes list (error codes) for most popular model as Bobcat 873, Bobcat s130, Bobcat e85

What kind of skid steer does a bobcat have?

Bobcat is equipped with a universal skid steer quick hitch. This allows the operator to connect a variety of attachments to this skid-steer loader. Thse include:

What is traction lock solenoid error on bobcat S205?

Traction lock pull solenoid circuit ERROR OFF (Should be ON). Loader can be moved forward & backward. Loader cannot be moved forward and backward. Loader cannot be moved forward and backward.

What to do if your bobcat won’t start?

Discussion in ‘ Skid Steers ‘ started by bobcat s650, Jan 20, 2017 . Try disconnecting the battery for 5-10 min and hook it back up and try again. maybe resetting the ecu will get you up and running. id give the dealer a call too, may be a software update to install.

How can I tell if my bobcat has power or ground?

check for power and ground with the key off, you should see 12v. with the harnesses reconnected, and key on, backprobe the orange wires, you should see 12v. if you dont have power and ground through the harness, move your ground to a good known frame ground, and recheck for 12v.

Is the Bobcat skid steer a quick hitch?

Although we try our best to provide our visitors with the most accurate information that we can find about your skid steer, we cannot be held responsible for any errors. Bobcat is equipped with a universal skid steer quick hitch. This allows the operator to connect a variety of attachments to this skid-steer loader.

What kind of equipment does a bobcat T190 have?

2009 BOBCAT, T190 Skid Steers – Track, Grapple bucket, cold air, excellent undercarriage, government owned, GP bucket, forks, and grapple available., 2012 BOBCAT, T190 Skid Steers – Track, 2012 Bobcat T190 skid steer – 570 original hours, Selectable Joystick controls (ISO or H pattern), OROPS, manua…

What is the service code for a Bobcat skid steer loader?

Bobcat S205 Skid-Steer Loader Fault Error Codes List See also: Bobcat Fault codes list; Bobcat loaders PDF Service Manuals; BOBCAT INTERLOCK CONTROL SYSTEM (BICS) Troubleshooting The following list shows the effects which can happen to the loader, and the probable causes when the BICS System lights are off or flashing and associated service code.

What are the error codes on a Bobcat loader?

Error codes of mini Bobcat loaders will help you identify a faulty actuator and repair the failed mechanism of both the internal combustion engine and the hydraulic system more quickly Deciphering the error codes Bobcat

When is the handle lock closed on a bobcat?

32-62 Handle lock closed on battery 32-63 The pedal lock circuit is shorted to ground 32-64 The pedal lock circuit is shorted to battery 32-66 Battery voltage out of range 32-68 Boom Lift Information Error 32-70 The chain of the right-hand grip is closed to ground 32-71 The chain of the right-hand grip is closed to the battery

Why do you need a Bobcat construction vehicle?

Bobcat construction vehicles bring the unparalleled focus and expertise of the market leading manufacturer, and enables owner-operators and small businesses to access the level of engineering excellence, reliability and efficiency usually reserved for assets of a far higher capital outlay.

Why is the front solenoid on my Bobcat not working?

Usually it is the problem of unexpected shutdown on this particular part. There is front and rear solenoid on the machine. They are electromagnets and have the job of control and manage the electric current of a machine. When one of them is not working, of course the machine won’t work normally.

What’s the serial number on a bobcat S130?

At our company we repairs construction machinery but we are’nt dealers of any trademark. We have to repair a Bobcat S130 with serial nº 529615XXX, it has the lift and tilt at hands. Those movements doesn’t works. At panel appears 32-65 code.

What to do if your bobcat ACS is not working?

If they look okay-put some dielectric grease on the plug and put it back together. The harness that connects all of that together is the ACS harness. You could have a broken wire there-look for rubs. You could have a bad sensor (handle or pedal), actuator, or even the controller, or a combination.

What are the error codes for mini loaders?

What can you do with a bobcat car?

Bobcat vehicles are used for construction, rental, landscaping, agriculture, grounds maintenance, government, utility, industry and mining.

How to decipher the error codes on bobcat?