How to check coolant temperature on Deutz BL 1011f?
How to check coolant temperature on Deutz BL 1011f?
Engine Operation 3.3 Monitoring Systems 3.3.2 Coolant Temperature Engine Temperature Gauge 24 985 0 The engine temperature gauge pointer should remain in the green sector most of the time. It should rarely enter the yellow-green sector. If the pointer enters the orange sector, the engine is overheating.
What kind of engine does a Deutz 1011 have?
As we’ve noted in earlier Tech Tips (see for example Tech Tip #148, Deutz 1011 and 2011 Thermostats: A Precautionary Note) the Deutz Model 1011 and 2011 series engine followed the very rugged, strictly air cooled 912 Deutz series.
What happens when a timing belt breaks on a Deutz?
This Tech Tip, one in a series that we publish for the marine and industrial engine community, focuses on what will happen when a timing belt breaks on a Deutz Model 1011, 1011F, or 2011 engine. The careful reader will note that we said “when a timing belt breaks on a Deutz” not “if one should break on a Deutz”.
When to use Deutz pose for engine maintenance?
Page 2 G When carrying out maintenance/repair op- G Use in accordance with the intended pur- erations on the engine, the use of DEUTZ pose also implies compliance with the con- original parts is prescribed. These are spe-… Page 3 Operation Manual B/F L 1011F B/FM 1011F 0297 9683 en Engine Serial Number Please enter the engine serial number here.
When to change timing belt on Deutz model 1011?
The Deutz Model 1011 and 2011 series engines don’t rely upon cast iron timing gears like most industrial engines. Rather they use a timing belt. This belt should be changed every 800 to 1,000 hours Because the engine is an interference fit engine, if the belt fails the pistons will hit the head and cause expensive damage.
Where can I find the Deutz BL 1011f operation manual?
Page 57 Service and Maintenance 6.5 Belt Drives 6.5.2 Tensioning Alternator Belts 6.5.3 Changing Alternator Belts 26 426 0 26 425 0 Slacken off bolts 1, 2 and 3. Slacken off bolts 1, 2 and 3. Adjust alternator 4 in direction of arrow by Adjust alternator 4 in direction of arrow by turning bolt 3. Page 58 Service and Maintenance 59 Gerade…
Do you need a new head gasket on a Deutz 1011?
When you are ready to put the head back on the 1011/2011 engine, you will need a new head gasket of the correct thickness. Deutz OEM gasket suppliers denote gasket thickness by the “notches” or protruding tabs in the gasket.
What is the compression ratio of a Deutz 1011?
Deutz 1011 Weight and compression ratio Weight approx: F2L1011F = 167 kg F3L1011F = 208 kg F4L1011F = 249 kg BF4L1011FT = 256 kg BF4L1011F = 256 kg Compression ratio Non turbo = 18.5:1 Turbo = 17.0:1 Click for Deutz 1011 engine manuals and specs.
