How to adjust the bands on a C6?
How to adjust the bands on a C6?
Adjusting the bands is a straight forward process. Just get the car safely up on jacks. Locate the intermediate band adjustment (the front one), loosen the locknut, torque down the adjustment screw to 10 ft lbs and then loosen it exactly 1 1/2 turns. Tighten locknut.
How do you tighten a band on a truck?
Raise the truck on a hoist or jackstands. Clean all dirt away from the band adjusting screw. Remove and discard the locknut. Install a new locknut and tighten the adjusting screw to 10 ft. lbs. (13 Nm). Back off the adjusting screw exactly 1 1 ⁄ 2 turns. Hold the adjusting screw from turning and tighten the locknut to 35–40 ft. lbs. (47–54 Nm).
What does tightening the bands in a transmission do?
Typically, the threaded rod passes through the transmission case to allow external adjustment of the band end gap. A band that is adjusted too tightly will displace the fluid that prevents friction material loss.
How can I adjust the band on my car?
Now you are able to adjust the band. Spray a bit of WD-40 on the band adjuster to make it easier to turn. Once adjusted make certain to tighten the lock-nut. Repeat on additional bands if needed. Not all transmissions have band adjustments.
Do you need wrench to loosen band adjuster?
You will need two wrenches in order to loosen the lock-nut from the band adjuster. Loosen the lock nut off about 4 turns. Now you are able to adjust the band. Spray a bit of WD-40 on the band adjuster to make it easier to turn. Once adjusted make certain to tighten the lock-nut. Repeat on additional bands if needed.
Is there a way to fix a tight it band?
There’s no way to fix a tight IT band, but you can make it feel better with rest, ice, compression and elevation — also known as the R.I.C.E. method. Most people suffering from a tight IT band can expect to recover in anywhere from a couple of weeks to a couple of months depending on the extent of the condition.
Why do I need to tighten the bands on my transmission?
The technical answer goes like this: In some transmissions, part of the operating controls include “bands”: metal straps with friction material on one side. When applied, the bands tighten around drive components to hold them in place. To apply exactly right, those bands needed to be adjusted properly.
How long does it take a tight it band to heal?
Most people suffering from a tight IT band can expect to recover in anywhere from a couple of weeks to a couple of months depending on the extent of the condition. The main message here: Be patient.
How can I tell if I have a tight it band?
Usually, a tight IT band can be self-diagnosed by feeling a sharp stabbing pain on the lower outside of your knee while running or cycling — especially when you plant your heels.
