How much does ball joint replacement on Ford F-350 cost?

Ford F-350 Super Duty Ball Joint Replacement (Front) costs $434 on average. Following is a breakdown of the labor and parts estimates. What is the Ball Joint Front all about? Ball joints are a part of your vehicle’s suspension system that connect the steering knuckles to the control arms.

How much does a lower ball joint replacement cost?

The lower ball joint replacement cost will likely be similar to the upper ball joint replacement cost, as the parts and labor costs are very similar. We’ve collected some sample pricing for parts and labor from some of the leading garage chains and parts suppliers in the country.

How much does it cost to replace a ball joint in a Ford Explorer?

A CostHelper reader in Illinois reports buying parts for a 1995 Ford Explorer for $50 at Autozone in 2010, and paying a local mechanic $200 for labor to replace the ball joints. Ball joint replacement can be done at a car dealership, an independent repair shop or car-repair chains like Firestone [ 4] , Midas [ 5] , Pep Boys [ 6] or Sears [ 7] .

Can a ball joint be taken off a car?

Then the ball joints themselves can be taken off and replaced with new ones. This isn’t the kind of part that can easily be repaired or mended. Because it is so small and inexpensive, a replacement is always recommended. Once the new joints are in place, the arms and wheels will be placed back on the vehicle.

Where are the ball joints on a car?

Ball joints are an essential part of a vehicle’s suspension system. There are usually four ball joints in a car’s front suspension, with an upper and lower one on each front wheel. “ New upper and lower ball joints, tie rod ” ( CC BY 2.0 ) by | El Caganer – Over 6 Million views! How much does ball joint replacement cost?

How many ball joints are in a front suspension?

There are usually four ball joints in a car’s front suspension, with an upper and lower one on each front wheel. “ New upper and lower ball joints, tie rod ” ( CC BY 2.0 ) by | El Caganer – Over 6 Million views!

What’s the difference between upper and lower ball joint replacement?

That way, you can hold the to it if there is any discrepancy in the price. The lower ball joint replacement cost will likely be similar to the upper ball joint replacement cost, as the parts and labor costs are very similar.

How much does a ball joint replacement cost?

There are also two joints per each wheel. If you want the basic parts for a do-it-yourself ball joint replacement, it may cost around $35 to $75 per ball joint or $130 to $300 for four. If you own a high-end or luxury vehicle, it can cost you more.

How much does it cost to replace a suspension joint on a Ford F-150?

The average cost for a Ford F-150 suspension ball joint replacement is between $255 and $301. Labor costs are estimated between $178 and $225 while parts are priced at $77. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How does a ball joint removal kit work?

Place knuckle in vice and use a ball joint removal kit to drive out lower and upper ball joints. The lower and upper ball joints must be driven out from the bottom. Install new ball joints using the same kit. Install in reverse order with the upper going in first.

How much does it cost to replace a ball joint?

This write-up is not meant to supplant the vehicle or ball joint manufacturer’s recommended procedures for replacing your ball joints. What does it cost to have the ball joints replaced? It runs from $800.00 on the low side up to about $1500.00 if done by a repair shop or dealer.

How to replace the front ball joint on a Chevy Silverado?

Remove the wheels. Remove the control arm (s). Remove and replace ball joints. Check the entire suspension system for any problems. When applicable, make sure the ball joints are lubricated during a major service. What common symptoms indicate you may need to replace the Ball Joint Front?

Can a bad ball joint cause bad steering?

Symptoms of a bad set of ball joints can include noise from your front wheels and sloppy steering. The good news is that replacing your F-250 or F-350’s ball joints requires only basic tools and a moderate level of skill. This article applies to the Ford F-250 and F-350 Super Duty (2005-2014).

What are the symptoms of a bad ball joint?

How do you replace a Ford Super Duty ball?

Below is a picture of the special tool (the home made version). (see photo below) 35) Set the axle on some thick cardboard or use a vice and just pound the axle seal (knuckle seal) (F81Z-3254-CB) on until it seats.

Can you replace the ball joint on a Ford F350?

The procedure is exactly the same for ball joint replacement on Ford F350 trucks. Remember though, that I am not a mechanic, this is just how I did it. Before beginning this project, thoroughly read the instructions that came with your replacement ball joints.

How much does ball replacement cost on Ford 350?

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Ford F-350 Super Duty Ball Joint Replacement (Front) costs $445 on average.

How to replace a lower control arm ball joint?

Replacing a Lower Control Arm Ball Joint. Learn how to replace a lower ball joint by pressing it out of the control arm and pressing the new one back in. To watch the longer, in depth version, click the link below. Press out a Ball Joint (In-depth):

How to replace the front ball joint on a Chevy Silverado?

Where are the ball joints on an Acura TL?

Depending on the suspension design, ball joints can be found either in the front or the rear. The vehicle may need to be taken to a shop for wheel alignment after this service. Mobile mechanics do not have the machinery to align wheels. Remove the wheels. Remove the control arm (s). Remove and replace ball joints.

How do you change the ball joints on a Ford truck?

Remove the upper and lower ball joint nuts. Knock each ball joint out of the housing and remove the knuckle. Remove the snap ring from the lower ball joint. Remove the old ball joints with a press or a hammer. Use a ball joint press to install new ball joints. Reinstall the knuckle into the housing and loosely install the nuts on the ball joints.

How do you replace a Ford Super Duty ball?

Where can I buy a Ford Super Duty Joint Replacement tool?

You can buy the “special tool” for about 40$-$80 using the part number OTC 6695. The axle and seal can also be taken to the dealer and they will press it on. For me it was easier to make the tool and do it myself.

How much does a Ford Super Duty F350 cost?

Ford Super Duty F250 F350 King Ranch Rear Seats 2011 2012 2013 2014 2015 2016 $1,420.00$1,775.00 Ford Super Duty King Ranch Superduty F250 F350 Center Console 2008 2009 2010 $1,100.00$1,375.00 Ford Super Duty F250 F350 New Katzkin Seats 2000 2001 2003 2004 2005 2006 2007 $3,116.00$3,895.00 (More Options)

What kind of seats does a Ford F350 have?

(More Options) Air Conditioned Ford Super Duty F250 F350 Truck New Black Leather Seats 2003 2004 2005 2006 2007 $3,844.00$4,805.00 (More Options) Air Conditioned Ford Super Duty F250 F350 Truck New Tan Leather Seats 2003 2004 2005 2006 2007 $3,844.00$4,805.00 (More Options)

What kind of ball joint do I need for a 1999 Dodge Ram?

The Dynatrac DA60-2X3050-D ProSteer Ball Joint Rebuild Kit is designed for your 1999-2019 Ford F-250/350 4WD or 1994-1999 Dodge Ram 2500/3500 4WD equipped with ProSteer DA60-2X3050-A Balljoints. This kit includes everything you need to rebuild the upper and lower ball joints on both sides of your truck.

What are the ball joints on a Ford truck?

This article applies to the Ford F-150/F-250/F-350 (2015-2019). Ball joints play a very important part when it comes to the suspension components of almost all modern vehicles. They are round (hence the name “ball”) bearings in a socket which function just like the ball and socket of a human hip.

What kind of ball joints do Fords use?

They have served any vehicle I’ve installed their parts in very well for over 50 years. In a BS session with the service manager at my local Ford store we got on that subject and he flat out stated that he would like it if Ford used greaseable ball joints and preferably MOOGs.

Which is better Moog or Ford ball joints?

Moog Ball Joints are better than OEM Ford balljoints because they have provisions for greasing the joints through the included grease fittings. This prolongs the life of the joints, unlike the OEM ones which are a sealed unit and do not allow you to grease them.

How many ball joints are there in front suspension?

Usually there are four ball joints in a car’s front suspension, with an upper and lower one on each wheel. Depending on the wear pattern on the suspension system, it can be necessary to replace one, two or all four ball joints. Typical costs:

Why do you need a ball joint front replacement?

Average rating from 399 customers who received a Ball Joint Front Replacement. Ball joints are an essential part of your car’s suspension. They connect your steering to your control arms, allowing you to be able to turn your wheels. The type of ball joints your vehicle has will depend on its make and model, and the type of suspension system.

What happens if a ball joint fails on a Chevy Suburban?

If a ball joint fails, the suspension can collapse, causing a loss of control of the vehicle. Depending on the suspension design, ball joints can be found either in the front or the rear. The vehicle may need to be taken to a shop for wheel alignment after this service.

Which is the best ball joint for a truck?

Best Ball joints? Moog, Spicer, XRF or OEM? First off I need to say thank you for this forum. Before I decided on a brand and model of a used truck I did a bunch of research and this forum was a lot of help. Ultimately the durability and reliability of the 7.3 engine won over all others.

How much does ball joint replacement on Ford F-350 cost?