How does the steering wheel airbag system work?
How does the steering wheel airbag system work?
The steering wheel airbag is contained within a trim cover which is designed with a molded seam which tears open as the airbag deploys. There are four or more impact sensors around the vehicle which send a signal to the main SRS (safety restraint system) computer in case of an accident.
When to turn off the airbag warning light?
After the repair is complete turn the ignition key to the on position and start the engine to straighten the steering wheel, the airbag warning light should be off. If when the repair is complete and the light is on disassemble to check the connections.
How do you reinstall an airbag in a car?
Once repairs are completed such as removing the steering wheel to replace the turn signal switch, cruise control or ignition switch simply reinstall the airbag by reversing these steps. Most electrical connectors produce an audible click to confirm their proper installation.
When did the passenger side airbag come out?
The initial airbag system was enhanced and replaced with the supplemental restraint system or SRS which was introduced in the S-Class Mercedes-Benz in 1980, Porsche was the first to introduce the passenger side airbag. What Goes Wrong?
How does an airbag clock spring work in a car?
An airbag clock spring is used to connect the steering wheel to other electrical devices such as the airbag safety system, radio volume and station selections, horn and cruise controls. This is done using a series of small wires wound between an upper and lower plate which is mounted between the steering column and the steering wheel.
What happens when the airbag warning light comes on?
When this malfunction occurs it will cause the airbag warning light to come on and the system to shut down. Horn and radio controls will also quit working as for the cruise control as well. You might here an electrical sparking or see a small amount of smoke indicating a short circuit has occurred between…
What’s the name of the cruise control button on a suburban?
Will likely go Dorman #2330814 (w/cruise, w/tilt) or AC Delco #D826A (Tilt wheel (N33) Cruise Control (K34) as a replacement. Buyer beware and good luck. Purchased to replace broken hazzard button on a 99 Chevy Suburban LS K1500 4WD.
