How do you reset the anti theft system on a 2007 Ford Expedition?
How do you reset the anti theft system on a 2007 Ford Expedition?
To reset the alarm on the 2007 Ford Expedition You have two options. You can pop the hood and disconnect the positive battery cable, then leave it off for about 30 minutes. This will make the power in the CPU drain, which will force the system to reset itself the next time it comes on.
Is there a theft alarm on a Ford Expedition?
The passive anti-theft system (PATS) is installed on every Ford Expedition at the factory. While some erroneously call this system the factory alarm, it really is not an alarm system. The PATS system will arm itself if someone attempts to start the vehicle with anything other than the PATS key programmed to that specific vehicle.
How does Ford passive anti theft system work?
Systems B, C and E have an anti-scan function. If you attempt to start the vehicle with an unprogrammed key, the theft indicator will flash rapidly and the vehicle will not start. Leave the key in the RUN position for 30 seconds for the anti-scan feature to time out.
Can you use a non Pats key on a Ford Expedition?
If you use a non PATS key, such as one that was cut simply to open the doors from an all-metal key blank, the system will remain armed. If the Expedition starts, then you have disarmed the PATS system. If not, move on to step 2. Verify you have the right key. Ford PATS keys have large black plastic, or molded rubber, heads.
How to reset the anti theft system in a Ford F-150?
The steps involved in the anti-theft system reset are: Using a programmed key in the ignition, turn the key to the on position. The car engine should not come on, only the ignition.
The passive anti-theft system (PATS) is installed on every Ford Expedition at the factory. While some erroneously call this system the factory alarm, it really is not an alarm system. The PATS system will arm itself if someone attempts to start the vehicle with anything other than the PATS key programmed to that specific vehicle.
How to reset the anti theft system in a Ford?
1 Insert the key into the ignition and turn it on to the position where the accessories are activated but not the engine. 2 Leave the key in this position for at least 10 minutes. 3 Check the anti-theft light again. 4 Now try to start the engine. 5 Repeat the process at least a couple of times if it does not work the first time.
Where is the anti theft light on a Ford?
The display of the car behind the steering will light up and will show the anti-theft light blinking or constantly lit. Leave the key in this position for at least 10 minutes. Check the anti-theft light again.
If you use a non PATS key, such as one that was cut simply to open the doors from an all-metal key blank, the system will remain armed. If the Expedition starts, then you have disarmed the PATS system. If not, move on to step 2. Verify you have the right key. Ford PATS keys have large black plastic, or molded rubber, heads.
