Easy lifehacks

How do you reset a locked GM TheftLock radio?

How do you reset a locked GM TheftLock radio?

This is the most common code used by GM personnel to reset locked Theftlock radios. Key in each number carefully, then hit the # sign to send your request through. Under normal circumstances, a locked Theftlock radio must be reset by a licensed GM dealer, who uses a special code known only by dealership personnel.

What to do if you forgot the code for a combination lock?

Spin the dial clockwise a few times to reset the lock and set it at 0. Apply upwards pressure on the shackle and turn the dial clockwise. The lock will catch several times, allowing for slight movement back and forth between two numbers. Write down the number in the middle.

How to unlock privacy protection password ( anti theft )?

Mobile:- Intex aqua power plus (Lollipop) Try tapping 0000 or 1234 or 000000 or 123456 when it asks for the privacy password. If that fails you will need to hard reset your device following the steps in the VisiHow article on this page or check out our newly updated Bypass Privacy Protection Password on Android

How to change a lost code on a padlock?

How to change forgotten or lost code on pin number padlock ideal for when you have forgotten pin. Theft is illegal, this is meant for your own locks and may not work on more expensive insurance approved locks, ive tried it on a few different types and it works a treat. Loading…

Is there a way to unlock a TheftLock radio?

Theftlock radios have evolved over time but are still used in some vehicles currently. Vehicles from the mid-90’s until mid-to late 2000’s can be unlocked using a few simple steps.

Spin the dial clockwise a few times to reset the lock and set it at 0. Apply upwards pressure on the shackle and turn the dial clockwise. The lock will catch several times, allowing for slight movement back and forth between two numbers. Write down the number in the middle.

What happens if you forgot the lock code on YouTube?

– YouTube Forgot Code To Lock??? If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.

Is there a way to open a lock without a code?

These steps can help you open a combination lock without a code, but should only be used on your own lock. Do not open locks that do not belong to you. Familiarize yourself with the lock. A lock has three main components. The shackle is the U-shaped piece which attaches it to an object. The dial is the portion with numbers that turns.

This is the most common code used by GM personnel to reset locked Theftlock radios. Key in each number carefully, then hit the # sign to send your request through. Under normal circumstances, a locked Theftlock radio must be reset by a licensed GM dealer, who uses a special code known only by dealership personnel.

How do I Reset my anti theft radio?

Press the “ON” button on the radio. The radio is now reset. Press the “Minute” and “Hour” buttons slowly until the security code matches. Going too fast may cause you to skip over the correct numbers of the security code. Store your radio security code in a safe place.

How do you unlock the radio on a Chevy?

How to Unlock a Chevy Radio Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Step 3: Press the AM/FM button. Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140.

Why is my Chevy TheftLock not turning on?

This security code keeps someone from using the radio in another vehicle if the unique security code is not entered. The radio display will read “LOC” and the device will not turn on. Whenever your Chevy battery is disconnected or the battery dies, the Delco Theftlock radio enters the “LOC” mode.

Why does my Chevy have a theft PassLock system?

However proud you are of your GM, you undoubtably know GM’s products well enough that you also know that in spite of how great they are, they almost always seem to have some kind of manufacturing quirk that ends up killing the whole “See the U. S. A. in a Chevrolet” vibe.

How do you turn on a locked radio?

Press the power button to turn on the radio. If your radio displays any functions such as playing a CD, cassette, or a radio station, your radio is not locked. If no sound is heard, you may need to replace your radio unit.

Where can I get the radio unlock code?

Now that you have your radio’s serial number, you can obtain the radio unlock code from General Motors. Be ready with a pen and paper to write down your radio unlock code. Step 1: Contact the GM radio hotline. From any landline or cell phone, call the toll-free GM Radio hotline at 1(800) 537-5140.

How do you disable TheftLock on a Chevy?

Put the key in the ignition and turn it to the “On” position. You don’t have to start the engine, just turn on the car’s electrical system. If the radio’s digital display reads “INOP,” leave the electrical system on for one hour before proceeding to the next step. If the display reads “LOC,” proceed to Step 2.

Is there a way to reset the PassLock system?

To cope with this pesky glitch you can reset the passlock system when starting your car. Insert your key in the starter, start you car as you usually would and let it stall.

What happens if you lose your GM TheftLock password?

However, if the 4-digit password gets lost, the system becomes inaccessible, effectively taking CDs hostage. Luckily, GM has provided a convenient (and safeguarded) protocol for recovering lost passwords. Put the key in the ignition and turn it to the “On” position.

How to reset anti theft system on GMC Yukon Denali?

Attempt to start the engine, then release the key to ON, vehicle will not start. Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF, the vehicle is now ready to relearn the Passlock ™ Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK.

How to reset PassLock reset system on Chevy?

1. Turn the key to ON and attempt to start the engine and release the key to the ON position. 2. The SECURITY light will illuminate. Wait 10 minutes until it turns off. 3. Turn the key to OFF for 10 seconds. 4. Turn the key to ON and attempt to start the engine.

When does the anti theft system car wont start?

If the engine does not respond or dies immediately after cranking up, leave the key in that position for 10 minutes. When the security light goes off, turn the ignition off, wait 20 seconds, and then start the engine. These are the most popular ways to solve the problem of anti theft system car wont start.

How to reset the PassLock system on GM cars?

Start the car immediately once the “Theft Sys” light stays on steadily. Remember to not turn the key off. Your car will now reset the passlock system and start as usual. If your passlock system keeps giving your problems, it may be broken and you will need to take it to the dealership.

How to deactivate the anti theft system on GM cars?

How to deactivate the anti-theft system on GM cars 1st WAY TO FIX IT ALL THESE STEPS MUST GET DONE USING YOUR CAR KEY. 1. lock the door 2. unlock the door 3. open it 4. shut it 5. lock the door again 6. wait about 20 seconds • This will shut the alarm off and reset the system.

Attempt to start the engine, then release the key to ON, vehicle will not start. Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF, the vehicle is now ready to relearn the Passlock ™ Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK.

Author Image
Ruth Doyle