How do you replace the lights on a ranger station?
How do you replace the lights on a ranger station?
Step #5) Using the 8mm socket, remove the screws holding the kick panel metal brace. Step #6) Just loosen the 5th screw in the kick panel metal brace enough to drop the brace to clear the bottom (2) screws in the dash panel. Step #7) Using the 7mm socket, remove the bottom (2) screws in the dash panel.
What are the bulbs on a Ford Ranger?
Or, you could check the Bulb Replacement Guide to identify the bulbs in your vehicle. High beam headlight & Low beam headlight: 9007 Front turn signal light ( blinker light) for 1988-2011: 3457 / 3457K / 3157 / 3157K / 3157A / 3157AK / 3157-SCK ( parking light) Rear turn signal light / Brake Tail light: 4157 / 4157K / 3157 / 3157K / 3156 / 3156K
What should I do if my Ford Ranger Dashboard Light keeps flashing?
Avoid hard acceleration and drive at a moderate speed. If the light keeps flashing, have vehicle checked as soon as possible. The tyre pressure monitoring system on the Ford Ranger alerts the driver that one or more tyres have become significantly deflated when the warning light comes on.
When do the headlights turn on on a Ford Ranger?
The Ranger automatic headlights turns on high beams if it is dark enough and when no other traffic is present. When the system detects an approaching vehicle’s headlights or tail lights, or street lighting, high beams are switched off in time before lights dazzle other road users.
Step #5) Using the 8mm socket, remove the screws holding the kick panel metal brace. Step #6) Just loosen the 5th screw in the kick panel metal brace enough to drop the brace to clear the bottom (2) screws in the dash panel. Step #7) Using the 7mm socket, remove the bottom (2) screws in the dash panel.
What kind of light bulb does a 1983 Ford Ranger use?
Instrument panel / gauge illumination for 1983 Ford Ranger: 161 / 89 / 1815 / 194 You can get LED bulbs to replace your halogen bulbs. They will share the same number.
How do you change the radio bezel on a Ranger?
Step #1) Remove the (2) screws holding the radio bezel with the 7mm socket. Step #2) Pull the radio bezel out slightly. It covers part of the dash panel. Step #3) Remove the (4) screws holding the kick-panel below the steering wheel.
What’s the bulb on the ranger station cluster?
The bulbs that light up your gauges and the cluster itself are bulb #194. They are held in with the black sockets. Turn the sockets counter-clockwise to remove. The bulb pulls straight out of the socket.
How to replace a Ford Explorer instrument panel light?
Pull the center console dashboard trim off and unplug the radio, the HVAC unit and the cigarette lighter. At this point you can pry off the dash trim around the instrument panel. Pull the instrument panel dash trim off the Explorer. Disconnect the plug behind the gear shifter.
How do you change the lights on a Ford Focus?
How to Change the Dash Lights in a Ford Focus. Remove the Phillips-head screws that secure the dash cluster to the dash. Pull the dash cluster forward. Remove the electrical connectors running to the back of the dash cluster. Turn the dash cluster over, and turn the small bulbs you want to replace counterclockwise.
Where is the fuse panel on a Ford Ranger?
The fuse panel is behind a panel on the front of the lower dash to the left of the steering wheel. I found a lot of conflicting information and diagrams from 1983-1992.
How to Change the Dash Lights in a Ford Focus. Remove the Phillips-head screws that secure the dash cluster to the dash. Pull the dash cluster forward. Remove the electrical connectors running to the back of the dash cluster. Turn the dash cluster over, and turn the small bulbs you want to replace counterclockwise.
How do you replace a dash light on a Ford Explorer?
Place the new light inside and twist to lock it. Repeat this for all dash lights that you are replacing. Place the instrument panel back into the dashboard and reattach the three plugs you removed earlier. Slide the gear shift indicator back into place. Reattach the instrument panel to the Explorer with the four 7mm bolts you removed earlier.
The bulbs that light up your gauges and the cluster itself are bulb #194. They are held in with the black sockets. Turn the sockets counter-clockwise to remove. The bulb pulls straight out of the socket.
Step #1) Remove the (2) screws holding the radio bezel with the 7mm socket. Step #2) Pull the radio bezel out slightly. It covers part of the dash panel. Step #3) Remove the (4) screws holding the kick-panel below the steering wheel.
How do you replace a check engine light?
#194 bulbs for the back lighting. (6) if replacing all of them. #74 bulb for the check engine and other indicator lights. Step #1) Remove the (2) screws holding the radio bezel with the 7mm socket. Step #2) Pull the radio bezel out slightly.
#194 bulbs for the back lighting. (6) if replacing all of them. #74 bulb for the check engine and other indicator lights. Step #1) Remove the (2) screws holding the radio bezel with the 7mm socket. Step #2) Pull the radio bezel out slightly.
What does the brake light on a Ford Ranger mean?
The Ford Ranger brake light vary between the red exclamation mark / point and the textual BRAKE symbol depending on region. The brake light illuminates for the following reasons: • The parking brake / handbrake is applied. Ensure the parking brake is fully released.
What are the four wheel drive warning lights on a Ford Ranger?
• 4L: Four-wheel drive low is engaged. • 4H: Four-wheel drive high is engaged. The airbag warning light on the Ford Ranger should as a system check come on briefly as the ignition is set to on or when the engine has started. It should then go out after a few seconds.
The Ranger automatic headlights turns on high beams if it is dark enough and when no other traffic is present. When the system detects an approaching vehicle’s headlights or tail lights, or street lighting, high beams are switched off in time before lights dazzle other road users.
• 4L: Four-wheel drive low is engaged. • 4H: Four-wheel drive high is engaged. The airbag warning light on the Ford Ranger should as a system check come on briefly as the ignition is set to on or when the engine has started. It should then go out after a few seconds.
What kind of light bulbs does a 2002 Ford Ranger use?
The 2002 Ford Ranger uses 164-type bulbs for its dash lights. You should replace all the bulbs at the same time. That way you won’t have to replace the bulbs again for a while. Turn off the engine and remove the two bolts under the radio trim using a socket wrench. Remove the three bolts from above the instrument panel using the socket wrench.
Can a 2002 Ford Ranger be replaced at the same time?
Replacing the instrument lights on your Ranger requires the removal of the dashboard itself on the driver’s side. The 2002 Ford Ranger uses 164-type bulbs for its dash lights. You should replace all the bulbs at the same time.
The 2002 Ford Ranger uses 164-type bulbs for its dash lights. You should replace all the bulbs at the same time. That way you won’t have to replace the bulbs again for a while. Turn off the engine and remove the two bolts under the radio trim using a socket wrench. Remove the three bolts from above the instrument panel using the socket wrench.
Replacing the instrument lights on your Ranger requires the removal of the dashboard itself on the driver’s side. The 2002 Ford Ranger uses 164-type bulbs for its dash lights. You should replace all the bulbs at the same time.
