How do you replace the air compressor in a Dodge Durango?
How do you replace the air compressor in a Dodge Durango?
Connect the refrigerant lines and the electrical connector; use new O-rings made for air-conditioning use and lubricate them with refrigerant oil. Reconnect the drive belt and the air intake duct and resonator. Reconnect the battery cable. Return the truck to the same technician to have its AC system evacuated and recharged.
How do you change the clutch on a Dodge Durango?
Plug the open fittings at the lines and discard the O-rings. Remove the bolts connecting the compressor to its mounting brackets with a wrench and lift the compressor from the vehicle. Transfer the clutch from the old compressor to the new if the new one does not have a clutch. This will involve a special puller tool from an auto parts store.
What kind of refrigerant do you need for a Dodge Durango?
The new compressor and the refrigerant oil used must be compatible with R-134a refrigerant. Take the Durango to a licensed technician who can properly discharge the air-conditioning system. Disconnect the truck’s negative battery cable. Remove the air intake duct and resonator.
Connect the refrigerant lines and the electrical connector; use new O-rings made for air-conditioning use and lubricate them with refrigerant oil. Reconnect the drive belt and the air intake duct and resonator. Reconnect the battery cable. Return the truck to the same technician to have its AC system evacuated and recharged.
Plug the open fittings at the lines and discard the O-rings. Remove the bolts connecting the compressor to its mounting brackets with a wrench and lift the compressor from the vehicle. Transfer the clutch from the old compressor to the new if the new one does not have a clutch. This will involve a special puller tool from an auto parts store.
Where can I buy a Dodge Dakota AC compressor?
Thanks for watching DIY’ers! You can check out our Amazon storefront at https://www.amazon.com/shop/diywithmichaelborders (as an Amazon Associate, I earn from qualifying purchases). Why is my car idling rough?-
The new compressor and the refrigerant oil used must be compatible with R-134a refrigerant. Take the Durango to a licensed technician who can properly discharge the air-conditioning system. Disconnect the truck’s negative battery cable. Remove the air intake duct and resonator.
Can a compressor be replaced on a Dodge Durango?
by Chris Moore. The compressor is one of the three major parts of an air-conditioning system. You can replace the compressor on your Dodge Durango’s air conditioner, but be aware that working on an air-conditioning system can be dangerous because of the high pressure the system is under and the environmental laws that govern refrigerant.
How to replace AC compressor in Dodge truck?
Dodge truck ac compressor replacement. – YouTube Dodge truck ac compressor replacement. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
What causes an AC compressor to not engage?
If the clutch doesn’t engage, the problem could be a blown fuse, an open in the wire to the clutch coil, a bad clutch coil, a poor ground, or a low pressure lockout. AC compressor clutches receive power in a number of ways. They can activate through a relay that’s energized directly by a proper condition of the low and high pressure switches.
If the clutch doesn’t engage, the problem could be a blown fuse, an open in the wire to the clutch coil, a bad clutch coil, a poor ground, or a low pressure lockout. AC compressor clutches receive power in a number of ways. They can activate through a relay that’s energized directly by a proper condition of the low and high pressure switches.
How can I tell if my compressor clutch is working?
So start your diagnosis by determining if the compressor clutch works. Turn the air conditioning controls to MAX AC and start the engine. Then look at the front of the compressor clutch. Both the pulley and the clutch should be spinning. That means the clutch has properly engaged with the pulley.
