Easy lifehacks

How do you remove the center console on a c6 Corvette?

How do you remove the center console on a c6 Corvette?

  1. (updated 4/11/14)
  2. Here are the tools you need:
  3. Open your console cover (lid) and remove the cover with a T15 Torx driver (4 small screws).
  4. Pull up the emergency brake boot in the front and it will reveal two 7mm screws holding the side trim plate on.
  5. The clips will pull out of the dashboard.
  6. Remove the shifter knob.

How do you remove the center console on a 2006 GTO?

Open the console storage compartment lid — then pull up on the back end of the console plate. It will pop out with a decent tug. It’s scary — but it won’t break. When you get the back end up, reach under it and unplug the power window and T/C switches — then keep working forward.

How do you replace the center console on a corvette?

The center console between the driver’s seat and the passenger’s seat of the C-6 Corvette may be removed for replacement or repair. Open the hinged cover on the console to reveal its four retaining screws. Remove the screws with a T15 torx screwdriver. Lift the cover straight up and remove it from the console.

How do you remove the center console on a C6?

1. Open your console cover (lid) and remove the cover with a T15 Torx driver (4 small screws). 2. Pull up the emergency brake boot in the front and it will reveal two 7mm screws holding the side trim plate on. Remove the two screws and pull down the side trim plate away from the dashboard.

Where is the F55 switch on a corvette?

Locate the black box, which is the F55 switch, at the rear of the console storage area. Firmly pull the switch out of its connector and place it aside. Skip this step if your Corvette does not have the F55 electronic suspension control option. Remove the two console retaining screws with a 7 mm wrench.

Is the C-6 Corvette still in production?

The sixth-generation Corvette, still with a fiberglass body, was introduced as a 2005 model and is still in production as of 2010. The C-6 comes with standard, non-pop-up headlights, which have not been used on Corvettes since 1962.

How do you remove the console from a C-6 corvette?

Remove the shift knob on a manual transmission by screwing it off counterclockwise. Place the transmission in 1st gear if your C-6 Corvette has an automatic transmission. Lift the console straight up and over the shift lever. Remove the console from the car interior.

How do you remove the center console from a car?

Lift the back of the center console off of the studs in the rear and slide it back towards the rear of the car. It may take some maneuvering to get it around the E-Brake boot. Pull the shifter boot in toward the shifter lever to release the plastic tabs from their slots in the bezel as shown.

Locate the black box, which is the F55 switch, at the rear of the console storage area. Firmly pull the switch out of its connector and place it aside. Skip this step if your Corvette does not have the F55 electronic suspension control option. Remove the two console retaining screws with a 7 mm wrench.

The sixth-generation Corvette, still with a fiberglass body, was introduced as a 2005 model and is still in production as of 2010. The C-6 comes with standard, non-pop-up headlights, which have not been used on Corvettes since 1962.

Author Image
Ruth Doyle