How do you remove nut from lower control arm?
How do you remove nut from lower control arm?
Remove the nut using a 14mm or 15mm wrench or socket. There could be a mini taper fit for this connection so you may need to shock it loose much like the ball joint. Grasp the sway bar link and remove it away from the lower control arm mount. This will help the sway bar link stay out of the way during the job.
What’s the best way to remove a bolt?
With bolts, you can use some locking jaw pliers to grab the bolt head and turn the bolt out, usually the relief cuts will let the pliers squeeze the head of the bolt enough that you can turn it out easily. 4. Rock the Bolt – This is another one to try early on in the bolt removal process and in conjunction with other methods.
How to remove and replace a Harley Motor mount?
Harley Motor Mount Removal and Replacement Video | Fix My Hog This video shows how to remove and replace the Harley motor mount. Our expert takes the time to remove the oil filter in this Fix My Hog video.
How to remove rusted rusted stuck lower control arm bolts?
You want more loosen, less tighten. spray in between. IF THIS IS WORKING THEN SKIP HEAT, IF NO LUCK then hammer spray, impact heat. do this a few times until bolt starts moving. PATIENCE IS KEY. 9)Thats it. It will backout. If you break the bolt using this method, the bolt was too far gone, and there was nothing
With bolts, you can use some locking jaw pliers to grab the bolt head and turn the bolt out, usually the relief cuts will let the pliers squeeze the head of the bolt enough that you can turn it out easily. 4. Rock the Bolt – This is another one to try early on in the bolt removal process and in conjunction with other methods.
Remove the nut using a 14mm or 15mm wrench or socket. There could be a mini taper fit for this connection so you may need to shock it loose much like the ball joint. Grasp the sway bar link and remove it away from the lower control arm mount. This will help the sway bar link stay out of the way during the job.
You want more loosen, less tighten. spray in between. IF THIS IS WORKING THEN SKIP HEAT, IF NO LUCK then hammer spray, impact heat. do this a few times until bolt starts moving. PATIENCE IS KEY. 9)Thats it. It will backout. If you break the bolt using this method, the bolt was too far gone, and there was nothing
What to use to tighten lower control arm bolts?
A universal socket and extension can really help when tightening the control arm bolts. Tighten the lower ball joint castle nut while aligning the cotter pin holes. Once the nut is tight insert the cotter pin. This pin is used to keep the nut in place as a safety precaution.
