How do you hook up a amp to factory?

The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal. Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.

Where to hook up a remote wire?

If you can’t find a remote wire from the HU, You can use a switch. to wire a switch to your amp you need wire the 12+ Connection on your amp to the remote on your amp. If there is a blue wire on your HU Use that as your Remote Wire.

How to wire an aftermarket power antenna into the factory?

Plug in your new antenna and give it a whirl. PS – I looked at the wiring diagrams for each year 87-92 and they all appeared to have the same hookup to the original power antenna so this should be able to be applied to all years.

Do you need a remote wire for an amp?

the remote wire is for powering on the amp. if you supply it with any 12v+ the amp should work. If you can’t find a remote wire from the HU, You can use a switch. to wire a switch to your amp you need wire the 12+ Connection on your amp to the remote on your amp. If there is a blue wire on your HU Use that as your Remote Wire.

What kind of wire is a remote turn on wire?

One thing to note, most head unit wiring harnesses also have a solid blue wire. This wire is typically for power antenna or factory amplifier turn on, do not get this wire confused with the remote turn on wire with the blue/white stripe.

How do you splice a remote turn on wire?

Since the factory wire is already terminated on both ends, splicing into the wire is necessary. Use a T-tap connector or cut the factory wire to splice into the wire by twisting the remote turn on wire together with one end of the factory wire, then crimp on a butt connector.

How do you hook up a amp to factory?