How do I reset my HL 1110?

How do I reset my HL 1110?

When a new TN1070 toner is installed in a Brother HL-1110 or HL-1210W printer, a reset gear turns and triggers a switch to reset the toner counter….It’s very easy to do:

1. Press the power button 7 times to enter continue mode.
2. Done.
3. If you want to exit continue mode press the power button 7 times.

How do I factory reset my HL l2360dw?

Unplug the AC power cord of the Brother machine. Locate the Menu icon on the control panel of the printer and select it. Use the arrow keys and select the Network option. Select the Factory Reset or Network Reset option and tap OK.

How to make my Brother printer discoverable?

Configure the wireless settings:

1. Place the Brother machine within range of your WPS or AOSS™ access point/router.
2. Make sure that the power cord is plugged in.
3. Turn on the machine and wait until the machine is in the Ready state.
4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.

How to connect to Wifi On my Brother printer?

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

How do I factory reset my Brother printer?

Press the Up arrow key select Reset.

1. Press the Settings button.
2. Press All Settings.
3. Press Initial Setup.
4. Press Reset.
5. Press All Settings or Factory Reset (depends on which model you have).
6. Press Yes.
7. Press Yes again and hold for two seconds.

How do I reset my brother T310?

DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W

1. Press Menu.
2. Press or to select the following: Select [Initial Setup]. Press OK. Select [Reset]. Press OK. Select the reset option you want to use. Press OK.
3. Press for [Reset] to confirm.
4. Press for [Yes] to reboot the machine. The machine restarts.

Why is my Brother printer not discoverable?

Verify that all devices on the network where your PC and the Brother machine are connected work correctly. Turn off the Brother machine and turn it back on. The built-in network card may not work for some reason. Turn off the Brother machine and turn it back on, this will reset the network card.

How do I reset the WiFi on my Brother printer?

FAQs & Troubleshooting

1. Press. (Settings) > All Settings > Network > Network Reset.
2. Reset Network? will be displayed. Press Yes.
3. Reboot OK? will be displayed. Press Yes for two seconds to confirm. The machine will restart.

How do I get my Brother printer back online?

And last, go to ‘printer’ in the menu window and tap ‘use printer offline’ and automatically this action will reconnect the printer ‘online’ from the ‘offline’ status. The process is really simple as it will turn a brother printer offline to active status, so printing jobs perhaps in a queue can continue.