How do I get my Brother printer to recognize my new drum?

How do I get my Brother printer to recognize my new drum?

Once the new drum is replaced, you will need to reset the drum counter on the Brother HL-L2350DW:

1. Make sure the machine is on.
2. Close up the front cover.
3. Hold down the “OK” button and the “up” arrow at the same time.
4. Press the “OK” button to select “Drum”.
5. Select the “down” button to reset the drum counter.

How do you reset the counter on a Brother printer?

How to Reset a Toner for Brother MFC Printers. Open the front cover of the printer and press the CLEAR / BACK button. Press the following buttons on the keypad in this sequence, *, 0 and finally 0.

How do I reset my toner counter?

Reset process

1. Switch-off the printer.
2. Press and hold the on/off button.
3. When all the LEDs turn on, open the cover and remove the toner cartridge + drum unit.
4. Release the on/off button.
5. Re-install the toner cartridge + drum unit back into the printer and close the printer cover.

How do I reset my Brother HL L2320D drum?

To reset Brother HL-L2300D, HL-L2320D, and HL-L2321D Drum Counter. (1) Make sure that the front cover is open. (2) Press and hold the Go Button for about four seconds until all of the LEDs light up. Once all four LEDs are lit, release Go Button.

How to factory reset a brother hl-2170w printer?

Just because it came in handy for me, here’s how to factory reset a Brother HL-2170W. Turn the printer off. Turn the printer on while holding the GO button down. All lights should be off, now push the GO button 7 times, it will flash each time. Wait for a minute. The printer will start it’s reboot sequence.

How do you reset a brother drum unit?

Open the front cover. 2 – Press and hold down the Go button for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release the Go button and close the cover. Your drum is reset to 100%. 1 – Put the new drum unit and toner cartridge assembly in the Brother MFC or DCP printer.

How can I Reset my Drum Machine LEDs?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately. Make sure that the machine is turned on. Open the front cover. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up.

How to reset the drum counter after replacing it?

Please reset the drum counter only when you replace the drum unit. 1 Make sure that the machine is turned on. 2 Open the front cover. 3 To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. 4 Close the front cover. 5 Make sure that the Drum LED is now off.