How do I find the axle ratio on my VIN number?
How do I find the axle ratio on my VIN number?
How to Find Out the Gear Ratio With the VIN Number
- Find the VIN of your vehicle. It can be found on the sticker on the inside of the driver’s side door or on a stamped metal plate embedded in the dashboard above the steering wheel.
- Identify the VDS section, the fourth through eighth digits of the VIN.
Do you need VIN number to check axle ratio?
You’re going to need the vehicle identification number (VIN) number to obtain the axle ratio for your Chevrolet Truck, but even after you decipher the VIN and its sequential meaning, you’re going to have to do more leg work. Axle ratios can sometimes be obtained off transmission labels, but those are not necessarily accessible.
How do you calculate the axle ratio of a truck?
Another way to calculate the axle ratio is to divide the number of teeth on the ring gear by that of the pinion gear. The resulting number is the ratio. Picking the right axle ratio for your truck is essential because different axle ratios have different trade-offs in terms of fuel efficiency and other factors.
Which is better 3.9 or 3.2 axle ratio?
A numerically higher ratio — say, 3.9 as opposed to 3.2 — can pull heavy loads much better but has a worse fuel economy and lower speed. By contrast, a numerically lower ratio has better fuel economy but worse torque and towing power. Which axle ratio is best for you comes down to how you want to use your truck.
Where do I find the gear ratio on my car?
How to Find Out the Gear Ratio With the VIN Number. It can be found on the sticker on the inside of the driver’s side door or on a stamped metal plate embedded in the dashboard above the steering wheel. It also is on your vehicle’s title. Identify the VDS section, the fourth through eighth digits of the VIN.
You’re going to need the vehicle identification number (VIN) number to obtain the axle ratio for your Chevrolet Truck, but even after you decipher the VIN and its sequential meaning, you’re going to have to do more leg work. Axle ratios can sometimes be obtained off transmission labels, but those are not necessarily accessible.
Where can I find the axle gear ratio?
GM RPO Axle Codes. To find the axle gear ratio of any GM vehicle, locate the RPO sticker (typically located in the glove box) and write down any codes starting with F, G, or H. Then, find those codes in the table below.
How can you tell the axle ratio of a Ford truck?
There’s no question, the easiest way to identify the axle and gear ratio in your truck is from the door sticker. If you open the drivers door and look at the door jamb, you’ll see a sticker like the one shown below:
What’s the axle ratio on a GM transaxle?
GM RPO Codes – Factory Identification Labels and Interpretation RPO Code Description Ratio G11 Transaxle Final Drive 2.56 G44 Axle Rear 3.07 G72 Axle Rear 2.14 G75 Axle Rear 3.62
