How do I calculate my deck around my pool?
How do I calculate my deck around my pool?
deck material needed: Multiply length x width. (Area = length x width). Example: A 14×28′ swimming pool = 14×28 = 392 sq. ft.
How much space should be between deck and pool?
The maximum gap between the decking and the pool coping is generally 3/4 inch. Slip resistance, gaps between boards and slope of the deck may also be regulated depending on the local codes. These design requirements should also be considered for any deck adjacent swimming pools or hot tubs, whether in or above ground.
How big should my above ground pool deck be?
A good rule of thumb is for a deck’s square footage to be at least the same as your pool’s square footage. To illustrate with a simple example, say a rectangle pool is 15 feet wide by 30 feet long. With a 450-square-foot pool, the deck should also be at least 450 square feet.
How do you calculate lumber for a deck?
To get the square footage of a single deck board, first convert the width from inches to feet. For example, 5 1/2-inch wide board divided by 12 equals . 46 feet. Now, calculate the square footage of one board by multiplying .
How much area do you need around a pool?
As a general guide, the pool and the pool surrounds should occupy approximately 25% of the total outdoor area. This will allow space to create an entertaining area or a play area for the kids. You can use the additional space to position a shed, install a clothesline or build a veggie patch.
What can I put around my pool instead of rocks?
Landscaping Around Your Above Ground Pool
- Concrete or Pavers. Concrete patios are a dependable and easy to care for option for your poolside.
- Gravel or Rock. Using gravel or rock is one of the most popular ways when landscaping around your above ground pool.
- Plants or Trees.
- Planters.
What kind of frame is needed for above ground pool deck?
The floor framing around the pool consists of 18 trapezoidal floor-joist frames–4-sided frames with two parallel sides and two sides that angle toward each other. The dimensions for building the frames are contained in the plans.
Where can I get a pool deck plan?
If we had used the traditional posthole method, it would’ve taken at least two days just to dig the three dozen holes and pour the concrete footings. The plans for building this deck are available free of charge from DekBrands, the company that sells Dek-Block piers.
What kind of wood should be used for ground level deck?
A ground level deck is meant to be low, which means you’ll want to consider the type of wood or composite you’ll use for framing. If the bottom of your deck frame is less than 6″ above the ground or partially buried, you should use pressure-treated wood that is rated for ground contact.
How does an above ground pool deck work?
Pool deck is placed at ground level, and the pool walls and top rails are wrapped in wood, with extra wide planks. This pool sits on the ground, which is one of the great advantages of above ground pools – no excavation.
