How big is a 1988 Ford Ranger cab?
How big is a 1988 Ford Ranger cab?
Measurements All 1988 Ranger models are 66.9 inches wide. The SuperCab models have room for up to six people, while all other models seat up to three. The S Regular Cab has a 2-liter I4 engine and 80 horsepower. The four wheel drive models get 17 miles per gallon (mpg) in the city and 21 mpg on the highway.
How big is the fuel tank on a Ford Ranger?
Car fuel tank capacity: 64.0 litres (16,83 gallons). How much fuel consumed Ford Ranger 2.5 TD, liters / 100 km or miles per gallon. Ford Ranger 2500 TD it is a Pickup Trucks. Car engine capacity: 2499 ccm (151,73 cubic inches).
How much horsepower does a Ford Ranger have?
Ford Ranger Regular Cab it is a Pickup Trucks. Car engine capacity: 2260 ccm (137,22 cubic inches). Car max power: 145.00 PS (106,47 kW or 142,29 HP) at 5250 Rev. per min. Car fuel: gasoline.
What kind of truck is the Ford Ranger?
The 1988 Ford Ranger is a pickup truck that is available in seven different models. These models include the two- and four-wheel drive SuperCab, S Regular Cab, and two- and four-wheel Regular Cab with short and long beds.
What was the price of a 1988 Ford Ranger?
The 1988 Ford Ranger is a pickup truck that is available in seven different models. These models include the two- and four-wheel drive SuperCab, S Regular Cab, and two- and four-wheel Regular Cab with short and long beds. The Ranger retailed for between $7,193 and $12,804 when it was released.
What kind of gas does a Ford Ranger use?
When your tank springs a leak or begins to muddy your gas with rust and sediment, AutoZone is ready with a replacement Ford Ranger fuel tank to get your truck back in the game. Clean, unadulterated gasoline is what your engine needs to run its best.
Where is the gas tank on a Ford Ranger?
Notes: With plastic filler, Under cab. Your Ford Ranger is ready for any situation, provided it has the gas it needs to get going. When your tank springs a leak or begins to muddy your gas with rust and sediment, AutoZone is ready with a replacement Ford Ranger fuel tank to get your truck back in the game.
What kind of engine does a 2000 Ford Ranger have?
2000 FORD RANGER Technical Information. Vehicle Type compact short/ long wheelbase, 2- and 4-wheel drive regular and SuperCab pickups. Engine iron block. and head I-4 and aluminum block, cast-iron head V-6s. Engine Availability. 2.5L I-4. 3.0L V-6. 4.0L V-6.
Is there a 4.0L engine in a Ford Ranger?
The 4.0L is related to the 2.9L however, so in a way it still lives on. The 3.0L is in NO WAY related to the 2.9L V6 Engine. The 2.9L V-6 was offered in the Ford Ranger from 1986-1992.
When did the Ford Ranger Super Cab come out?
There were some upgrades to the Ford Ranger transmission in 1985 with the five-speed manual becoming the standard feature on trucks. Ford did not introduce major changes in the Ford Ranger design until 1986. During this time, Ford launched what was to be known as the Super Cab, an expansion of the truck’s body-style.
Is there a 1988 Ford Ranger 2WD for sale?
I have a 1988 Ford ranger 2wd for sale. It is a 4cylinder manual transmission it 1,800 I have a 1988 Ford ranger 2wd for sale. It is a 4cylinder manual transmission it It is a 4cylinder manual transmission it only has 118000 miles on it, and is in pretty good condition. I have a 1988 Ford ranger 2wd for sale Facebook. Com/bobbysclassiccars/.
What kind of truck is a Ford Ranger?
2010 Ford Ranger, , , Extended Cab Pickup, Your 2010 Ford Ranger is perfect for daily work or weekend road trips to our neighboring communities of Por… 2011 Ford Ranger, 4WD 4dr SuperCab 126″ XLT, XLT, Extended Cab Pickup, *DESIRABLE FEATURES:* 4X4, Remote entry, SiriusXM, AUX audio, Fog lamps. Your 2…
How much does a Ford Ranger XLT cost?
Monthly Estimate based on a 4.4% rate for 60 months, $27,999 vehicle price, $0 down payment, $0 trade-in, $0 sales tax. They are great!
How much does a 2008 Ford Ranger cost?
Monthly Estimate based on a 4.4% rate for 60 months, $6,990 vehicle price, $0 down payment, $0 trade-in, $0 sales tax. Read 4 more dealer reviews…
What kind of transmission did Ford Ranger have?
In 1990, the 2.9 V-6 cane optional on regular cab models and as standard equipment on four-wheel drive “Super Cab” models. Five-speed manual and four-speed automatic transmissions were also offered.
What was the fuel capacity of a 1990 Ford Ranger?
Dimensions and Capacities. Rangers without air-conditioning held 7.8 quarts. Fuel capacity was 16.3 gallons in regular cab models and 19.6 gallons for the extended cab 1990 Ranger. The regular cab, short-bed Ranger was the smallest and lightest of the family at 176.5 inches long and 2,820 pounds.
How big is the bed on a Ford Ranger?
With a long bed and regular cab, the Ranger measured 188.5 inches long and weighed 2,857 pounds. Extended cab models were available with a single bed choice and measured 193.7 inches long and weighed 3,128 pounds.
Measurements All 1988 Ranger models are 66.9 inches wide. The SuperCab models have room for up to six people, while all other models seat up to three. The S Regular Cab has a 2-liter I4 engine and 80 horsepower. The four wheel drive models get 17 miles per gallon (mpg) in the city and 21 mpg on the highway.
What kind of engine does a Ford Ranger have?
All four-wheel drive models feature a 2.9-liter V-6 engine and 140 horsepower. The S Regular Cab is equipped with a five-speed manual overdrive transmission, while all other versions have a four-speed automatic overdrive transmission.
What was the name of the Ford Ranger in 1980?
By 1980, General Motors was developing its own domestically-produced compact truck, with the Chevrolet S-10/GMC S-15 providing a potential competitor. Peterson also felt, if equipped correctly, buyers would pay nearly the same for a compact truck as a full-size truck (such as the F-100).
What are the dimensions of a Ford Ranger?
The wheelbase is 125 inches for the SuperCabs, 113.9 inches for the Long Beds, and 107.9 inches for the Regular Cabs. The SuperCab models have room for up to six people, while all other models seat up to three. Headroom is 39.6 inches for the SuperCabs and 39.2 inches for all other models.
What was the horsepower of a 1983 Ford Ranger?
The engine was carbureted through 1984, and then switched to a multiport electronic fuel-injection system in 1985. In the 1983 Ford Rangers, the horsepower was only rated at 79, but it climbed to 82 in 1983, 100 in 1989 and finally 112 horsepower in 1996. Its top torque rating was 135 foot-pounds.
When did the 2.0 liter Ranger come out?
The 2.0/2.3 liter versions that were offered in Rangers starting in 1983 used a different head having four evenly spaced round holes of equal size. A 2.0 liter 1bbl carbureted version was offered in Rangers from 1983 – 1985, and in 1987 – 1988 with a 2bbl carburetor in some parts of the US, Canada and Mexico.
What are the fuel lines and hoses on a Ford Ranger?
If the blood of your Ford Ranger engine is the gas or diesel that powers it, then the veins would be the fuel lines and hoses. These provide a pathway for fuel to travel as it makes its way from the gas tank to the engine so it can be used for combustion.
The 2.0/2.3 liter versions that were offered in Rangers starting in 1983 used a different head having four evenly spaced round holes of equal size. A 2.0 liter 1bbl carbureted version was offered in Rangers from 1983 – 1985, and in 1987 – 1988 with a 2bbl carburetor in some parts of the US, Canada and Mexico.
Are there 4 cylinder motors in a Ford Ranger?
We have developed a series of assemblies (including strokers) for 4 cylinder Ford motors (2.3, 2.5 & stroker Ford 4 cylinders for oval track/mini stock). Racer Walsh carries numerous 2.0 and 2.3 parts. Check them out for a variety of Ford 4-cylinder parts.
What kind of engine is in a Ford 2.3 liter?
The Ford 2.3-liter in-line four-cylinder engine, commonly called the Lima engine because Ford manufactured it in Lima, Ohio, belongs to the 2.0-, 2.3- and 2.5-liter engine family.
What kind of transmission does a Ford Ranger have?
The Toyo Koygo seems to be the more common of the Ranger / Bronco II manual transmissions. The Mitsubishi has a bottom cover, a Mazda does not. Toyo-Koygo’s are more likely to be found in 4-cylinder 4×4 Rangers. Bronco II’s are more likely to be Mitsubishi FM145’s
What kind of gas mileage does a Ford Ranger get?
The S Regular Cab is equipped with a five-speed manual overdrive transmission, while all other versions have a four-speed automatic overdrive transmission. The four wheel drive models get 17 miles per gallon (mpg) in the city and 21 mpg on the highway.
Do you need a torque converter to replace a manual in a Ford Ranger?
If replacing a manual, the manual starter won’t work. You’ll need a longer one from an automatic. The C4 automatic transmission torque converter will work on a 4.0 factory auto flexplate engine. If replacing an automatic with a manual, you need a manual transmission computer to turn the MIL off.
The Toyo Koygo seems to be the more common of the Ranger / Bronco II manual transmissions. The Mitsubishi has a bottom cover, a Mazda does not. Toyo-Koygo’s are more likely to be found in 4-cylinder 4×4 Rangers. Bronco II’s are more likely to be Mitsubishi FM145’s
The S Regular Cab is equipped with a five-speed manual overdrive transmission, while all other versions have a four-speed automatic overdrive transmission. The four wheel drive models get 17 miles per gallon (mpg) in the city and 21 mpg on the highway.
If replacing a manual, the manual starter won’t work. You’ll need a longer one from an automatic. The C4 automatic transmission torque converter will work on a 4.0 factory auto flexplate engine. If replacing an automatic with a manual, you need a manual transmission computer to turn the MIL off.
How many horsepower does a Ford Ranger have?
The Ford Ranger series has progressed dramatically since its introduction. The original engine was only a 2.3-liter with four-cylinders. The original engine has a maximum of 80 horsepower. This is also similar to the engines found inside some earlier models of the Ford Pinto.
The 1988 Ford Ranger is a pickup truck that is available in seven different models. These models include the two- and four-wheel drive SuperCab, S Regular Cab, and two- and four-wheel Regular Cab with short and long beds.
The Ford Ranger series has progressed dramatically since its introduction. The original engine was only a 2.3-liter with four-cylinders. The original engine has a maximum of 80 horsepower. This is also similar to the engines found inside some earlier models of the Ford Pinto.
There were some upgrades to the Ford Ranger transmission in 1985 with the five-speed manual becoming the standard feature on trucks. Ford did not introduce major changes in the Ford Ranger design until 1986. During this time, Ford launched what was to be known as the Super Cab, an expansion of the truck’s body-style.