Easy lifehacks

Does 2007 Yukon Denali have AFM?

Does 2007 Yukon Denali have AFM?

The 2007 GMC Yukon SLE and SLT come with a 4.8 liter V8 making 295 horsepower and 305 pound-feet of torque. The 5.3 liter V8 is standard on Yukon XL models. The Yukon Denali comes standard with a 6.2 liter V8 engine making 380 horsepower and 417 pound-feet of torque. It also has active fuel management technology.

How do you reset the oil light on a GMC Denali?

2015-2020 GMC Yukon Oil Reset

  1. Close all doors, gear to park position.
  2. Turn the ignition on. Don’t start the engine.
  3. Use the scroll button to navigate the INFO menu then press the CHECK button.
  4. Then scroll down to REMAINING OIL LIFE.
  5. While the REMAINING OIL LIFE is displayed.
  6. Turn Off the ignition.

How do you reset the oil life on a 2013 Yukon Denali?

GMC Yukon Change Engine Oil Light Reset Procedures:

  1. Turn ignition switch to ON position with engine off.
  2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
  3. Change Oil lamp will flash for 2-10 seconds while it resets.
  4. Once it stops flashing, the maintenance light reset is complete.

Are there any issues with the GMC Yukon XL Denali?

There are also massive forum threads covering the issue with the pickup trucks. Watkins’ 2016 GMC Yukon XL Denali has had the driveshaft balanced and the tires and wheels switched out two different times, and yet the problems persist, especially the buffeting.

When did GMC Yukon engine shut down while driving?

In January 2010, the dealer replaced the throttle body assembly. The current and failure mileages were approximately 115,000. Engine shuts down while driving: I have a Yukon xl 2002. Over the past 6 months the engine would suddenly shut down while the car is being driven. It has occurred at high speed and at low speed.

Why are my GMC Yukon brakes not working?

Vehicle brakes would not operate properly, increased braking effort and message displayed on instrument cluster �service brake system�. This is the 4th time a beake issue has been experienced with a gm suburban/yukon vehicle. First 3 were on our 2017 Chevrolet suburban premier.

How many times has GMC Yukon been to dealer?

“Vehicle has a terrible vibration,” reads another NHTSA complaint about the 2015 GMC Yukon (NHTSA ID Number: 10681579). “Has been to dealer seven times for a total of four weeks. A GM engineer has looked at it twice. They have replaced ring/pinion, driveshaft, axle.

Why did my GMC Yukon Denali shut down?

The contact owns a 2003 GMC Yukon denali. While driving at approximately 65 mph, the engine shut down completely with no prior warning. The contact was able to get the vehicle to the side of the road and had it towed to an authorized dealership. The dealer stated that although not certain, the fuel tank could have caused the failure.

Vehicle brakes would not operate properly, increased braking effort and message displayed on instrument cluster �service brake system�. This is the 4th time a beake issue has been experienced with a gm suburban/yukon vehicle. First 3 were on our 2017 Chevrolet suburban premier.

What’s the average speed of a GMC Yukon?

Speed varying between 30 mph to 70 mph. Engine will restart (be turned back on after wait time at the ignition) and drive following these incidents, however incidents reoccur. Also upon taking it to a GMC Chevrolet dealership for inspection, service department was unable to find any “codes” related to this.

Author Image
Ruth Doyle