Easy lifehacks

Can I fit a boiler flue?

Can I fit a boiler flue?

A boiler flue that meets the regulations shouldn’t need any form of planning permission, if you intend to fit a boiler flue outside of the regulations then you will probably require planning permission. Again, to ensure that your boiler flue is being fitted correctly you should consult a qualified installer.

What does a boiler Plume KIT do?

A plume management kit is a simple device that is attached to your existing flue kit. It is essentially an extension of the flue pipe that is used to release the plume gases out at a more convenient direction and height.

Does a boiler need a flue?

Does Every Boiler Have a Flue? Regular, combi and system boilers are all fitted with flues. In fact, the only type of boiler which doesn’t have a flue is a back boiler, which used to be situated behind fireplaces. However, back boilers are increasingly rare these days and most homeowners choose to have them updated.

What is the maximum length of boiler flue?

As a general rule, a flue should work effectively when it’s up to 10 metres in length. This is usually based on a standard thickness of 60/100mm. For flues that need to be longer than this, it’s a good idea to increase the thickness to 80/125mm to ensure that the gases are able to escape easily.

What is boiler flue?

A boiler flue is a pipe that carries exhaust gases produced by a boiler outside the home and releases it into the atmosphere. Boilers burn fuels such as gas or oil to heat water, a process that creates harmful by-products such as carbon monoxide.

When should a plume management kit be used?

The Buderus plume management kit should be fitted when the installation of an ordinary flue termination point would contravene regulations. The plume management kit diverts, redirects or repositions the pluming gasses so that they don’t cause a nuisance to neighbouring properties.

How often should a flue be clipped?

IIRC the standard is at least every 1.8M or at every joint. Unless MI’s state otherwise.

What comes out of boiler flue?

What fumes come out of a boiler flue? Carbon dioxide and water vapour. If a boiler isn’t working correctly, it can also produce carbon monoxide, which can be fatal.

How long can a gas boiler flue be?

10 metres
As a general rule, a flue should work effectively when it’s up to 10 metres in length. This is usually based on a standard thickness of 60/100mm. For flues that need to be longer than this, it’s a good idea to increase the thickness to 80/125mm to ensure that the gases are able to escape easily.

How far away from a window should a boiler flue be?

The regulations differ for most boiler models depending on their size, but the typical guide is that the flue needs to be at least 30cm away from an opening, such as a window, if it is to be placed above or to the side of said opening.

What kind of flue do you use in a boiler?

The Firebird range of stainless steel flue kits and accessories are suitable for use with the Envirogreen™, Envirolite™, Enviromax NOx™, and Enviroblue™ ranges of boilers. Stainless steel flue kits are available for the following applications: A range of flue kits has been designed specifically for use with the Blue Supreme™ range of boilers.

How big is a telescopic boiler flue kit?

The telescopic flue kit provides a length of 350 – 500 mm, and flue lengths are available in 0.25 metre, 0.5 metre and 1 metre – hardly ever the need to cut a length of flue, reducing installation time and wastage

Are there any unapproved flue kits in the UK?

Use of unapproved flue kits may invalidate the boiler warranty. Firebird was the first oil boiler manufacturer to introduce plastic flue kits to the UK market. The Plast-Fit range of plastic balanced flue kits provides flexibility, ease of installation and an aesthetically pleasing high-quality finish.

Can a Plas fit flue be used in a high level boiler?

Available in both Low Level and High Level options, the Plas-Fit flue kits are suitable for use with the Envirogreen™, Envirolite™, Enviromax Low NOx™ and Enviroblue™ range of boilers in outputs from 12kW to 35kW.

Author Image
Ruth Doyle