Can a brake line be replaced on a Chevy Silverado?
Can a brake line be replaced on a Chevy Silverado?
On investigation I found that a rusted brake line clipped to the top of the chassis had sprung a leak, and was spraying brake fluid onto the hot exhaust manifold. I understand that these lines are not available as replacement parts from GM.
What kind of brake lines do GM trucks have?
From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. I have a 03′ Yukon XL AWD w JL4, and like others my brake lines are toast.
Can a stainless steel brake line be replaced?
So even if your lines haven’t failed yet, switching to a set of braided stainless steel lines can give you better piece of mind, as well as a firmer pedal feel if your rubber lines are starting to get bubbling issues. Before getting too far into things, it’s best to locate the brake lines you’re replacing to get a plan of action.
How do you replace a brake line on a car?
You will need to chamfer the end of the brake line at both cut points to clean it up first. Position the new nut onto the tube, because once you flare it, it will be much harder to get it on. You will then need to flare both ends of the line at the cut points using a flaring tool.
On investigation I found that a rusted brake line clipped to the top of the chassis had sprung a leak, and was spraying brake fluid onto the hot exhaust manifold. I understand that these lines are not available as replacement parts from GM.
So even if your lines haven’t failed yet, switching to a set of braided stainless steel lines can give you better piece of mind, as well as a firmer pedal feel if your rubber lines are starting to get bubbling issues. Before getting too far into things, it’s best to locate the brake lines you’re replacing to get a plan of action.
You will need to chamfer the end of the brake line at both cut points to clean it up first. Position the new nut onto the tube, because once you flare it, it will be much harder to get it on. You will then need to flare both ends of the line at the cut points using a flaring tool.
How to Bleed your brakes on a Chevy Silverado?
(Related Article: How to Bleed Your Brakes – ChevroletForum.com) With a firm brake pedal established and no leaks present, all that remains is to button up the truck. Refit the wheels and snug the lug nuts. Lower the truck off the stands. Torque the lug nuts to spec (90 ft./lb. for aluminum wheels; 100 ft./lb. for steel wheels).
