Why is the reverse gear not working on my 4L60E?

Valve Body Issues- A bad valve body can make the reverse gear not work in the 4L60E. If the valve body ends up warped, or if the gasket fails, it’s entirely possible that the gear won’t engage. Booster Valve- A bad booster valve can leave you without reverse in a hurry. Sun Shell- A broken sun shell will cause…

Are there any reverse gears in my Trailblazer?

No reverse or any drive gears Hi Im new here but hoping to get some useful information that will shine light on this situation without swapping or rebuilding the transmission. My wife has a 2004 trailblazer , about 6 months ago I replaced tran fluids and filter.

What happens when you put a car in reverse?

When put in reverse it clunks like its engaging, then won’t move, no sign of moving. It clunks like its in, but 100% freewheels. Any chance its something stupid and easy?? Did this problem suddenly occur?

Is there a reverse on a c2500 6.5 TD?

On a mildly chilly morning, my 95 c2500 6.5 TD (4L80E) reversed 2 feet and all of a sudden, felt like a fuse popped. No reverse now -not even a hint of reverse. All forward gears work perfectly. The fluid was brown and low. I drained the pan, replaced the filter, filled it back up.

What causes the No 3rd or 4th gear problem?

One of the most common (and most frustrating) problems that happens to the 4L60E is when it loses 3rd and 4th gear at the same time. This leaves you driving around a car or truck that screams down the road. So, what causes the no 3rd gear or 4th gear problem?

Can a bad clutch pack cause a 4L60E to stop working?

Your 4L60E has a set of clutches that work with both 3’rd and 4’th gear. It’s referred to as the 3-4 clutch pack. A bad 3-4 clutch pack can certainly cause the 3’rd and 4’th gear to stop working. In fact, once the transmission “shifts” into third, it’ll feel like you lost the whole thing.

Can a bad clutch pack cause 3rd gear to stop working?

It’s referred to as the 3-4 clutch pack. A bad 3-4 clutch pack can certainly cause the 3’rd and 4’th gear to stop working. In fact, once the transmission “shifts” into third, it’ll feel like you lost the whole thing. You can shift into second to get yourself home. Just be careful on the highway.

What causes an automatic transmission to not go into reverse?

In an automatic transmission, these units function as a one-way clutch. When the clutches begin to fail, the lower gears will not engage. Repair requires replacing the torque convertor and flushing the transmission fluid. A worn reverse gear can also occur when a transmission is mishandled.

Why does my Chevy Cavalier not change gears?

MY 1992 Chevrolet Cavalier, will not change gears after it gets hot. It runs fine for a while, but when it runs for awile it stops and will not go. Can you tell me whats wrong and is it something I ca … read more

Is there a problem with my Chevy Trailblazer?

I have a 2000 Chevy Trailblazer 4×4, just recently I lost my reverse totally but it shift well when I put it in drive. The truck runs great what can I do to fix this problem myself?

What happens when you shift into reverse transmission?

Stalls When Shifting Into Reverse – Transmission Going? Discussion in ‘ Transmission & Drive train ‘ started by Rebecca, Sep 26, 2011 . I’m new (just posted my intro in “New Member” section) and I am in need of some advise/guidance.

Is the 4L60E transmission a descendent of the 700R4?

The 4L60E transmission is the direct descendent of the 700R4, and as such already had over a decade of refinement put into it before it ever even made it into production. This means that even the early ones were pretty good from day one of their production life.

Why does my car stall when shifting into reverse?

If it happens when you are shifting into reverse then it could be that your Torque Converter Clutch is being engaged at idle. In this case I would recommend doing a complete transmission flush and replace the transmission filter and fluid.

Can a Chevy Silverado go in reverse FWD?

FWD gears work fine. will go in reverse once in awhile. removed transmission pan changed filter and chevy silverado No reverse in truck. FWD gears work fine. Vocational, Technical or Tra… Vocational, Technical or Tra…

Why does my car only go in reverse and not forward?

If your fluid is too low, then your transmission may not be able to build up enough hydraulic pressure to shift properly into gears. Automatic transmissions use pressured hydraulic fluid to change gears typically via a car’s computer which activates the transmission solenoid.

What does it mean when your truck has no forward gears?

Suddenly, you have no forward gears in your vehicle. No signs of transmission issues before this. Your truck works strong in reverse, but no forward at all. It just feels like you’re in neutral. I read a lot of posts that scared me about how the planets and other expensive sounding parts of my automatic transmission were likely dead.

How to reset Transmission Control Module Chevy [ updated ]?

Now all you have to do is press the accelerator pedal. Be sure to press it down. Press the accelerator pedal all the way down in order to activate the kick-down switch. Activating the Kick-Down switch is all you need. Keep pressing the foot pedal, and continue to the next step.

What causes a car to jump out of gear when downshifting?

If you can hear the gears clashing only when downshifting, the problem may come from the synchronizer (too much play at the output shaft end). However, a grinding noise may also come from a dragging clutch. Shift linkage problems can cause your transmission to jump out of gear.

What to do if your transmission is stuck in gear?

If your transmission is stuck in gear and you are far away from home, try this: 1 Pull over and turn the car off. Remove the key. 2 Do not press the gas pedal or any other buttons on the car. 3 Wait 20 seconds. 4 Start the car and drive to see if it is out of limp mode.

What to do if your Chevy Silverado loses power?

While generally the Chevy Silverado is a premium, reliable truck, there are times when even the best vehicles can end up having problems. If you’ve ever had your Chevy Silverado or GMC Sierra suddenly lose power, you may be wondering exactly what is going on with your truck.

What causes 5th gear to fail on Dodge NV4500?

The otherwise reliable Dodge NV4500 4×4 manual transmission has one fault, a tendency for 5th gear failure, we have the solution. The Fifth Gear locknut retainer locks the nut to the spline on the main shaft. By doing this the retaining nut can’t back off.

When did the GM NV3500 5 speed transmission come out?

GM NV3500 5-Speed Transmission Parts. The New Venture Gear 3500 (NV3500), a 5-speed manual transmission with overdrive, was released in 1993 for use in GM and Dodge light-duty trucks such as the Chevy Silverado and GMC Sierra (1500 & 2500LD), Dodge Ram 1500 & 2500 light-duty, and Dodge Dakota.

When did the GM Venture Gear 3500 come out?

The New Venture Gear 3500 (NV3500), a 5-speed manual transmission with overdrive, was released in 1993 for use in GM and Dodge light-duty trucks such as the Chevy Silverado and GMC Sierra (1500 & 2500LD), Dodge Ram 1500 & 2500 light-duty, and Dodge Dakota.

What was the transmission problem on a 1998 Dodge 1500?

The Doge transmission in 1998 is known for the governor pressure switch and solenoid failures causing alot of owners to be duped into a new transmission. Heres the how-to save alot of money for the do-it-yourselfer. Loading…

Can a 1999 Dodge Ram 1500 go in reverse?

19999 doge ram 1500 want go in reverse and want go forward start up good run like nothing wrong when you go put in drive want go or when you go put it in reverse want back up also.. 12 people found this helpful.

What’s the reverse gear on a Dodge Ram?

My 1999 Dodge Ram Pick-up Truck has lost reverse gear. I have all other gears-P,N,D,D1,D2 & 4wd. Engine starts fine and runs well. When I shift into reverse the engine acts as though it is in nuetral. I have replaced the TPS and Air Idle Sensor.

When did transmission go out on Dodge 1500?

Transmission went out in 1997 Dodge Ram 1500. Its the 360/5.9 liter V8. Im researching to find a used one to replace it. What year models are compatible and what types?

What kind of transmission does a 1996 Dodge Ram have?

I have a 1996 ram 4×4 5.9 l ext cab 1500. We bought the truck and thee reverse didnt work. Then we looked for a replacement tranny at a junkyard and couldnt find one. From what i understand now a 97, 98 or 99 tranny will fit in the 96 as long as its a 4×4 5.9 liter? I tried to trust a friend of mine who said he could rebuild the transmission.

Can a Dodge Ram 2500 have a transmission?

29 people found this helpful. yes the transmission from a 2500 will fit, the 97 1500’s and 2500 w/5.9 v8 came with a 46RE which has a lighter duty torque converter, and different bands. the 2500 prolly has a different transfer case though. 49 people found this helpful.

Why does my transmission put my car in neutral?

The valve body installed inside your transmission was programmed to put your car in neutral when stopped. This was a new feature aiming to increase fuel economy. While it barely improved your fuel economy, it caused excessive wear in the first gear clutches.

Why does my MerCruiser not shift into gear?

It Also causes problems when shifting INTO gear, as the ‘stickiness’ causes the mechanism to throw the microswitch over, however this mechanism should not actually flinch at all when shifting INTO gear.

Can a car drive forward when in neutral?

The fluid is full and not burnt. It will drive forward when in reverse and in neutral. I turned the engine off and checked neutral, it was not in gear but tried to go forward as soon as I started the engine. I have never seen this!

What causes a transmission to shift hard into reverse gear?

Transmission Hard Shift Into Reverse: Hello, What Would Cause a Hello, what would cause a transmission to shift hard into reverse gear? It has new fluid and filter, might have too much fluid. No codes and a mechanic said all solenoids fire. have the same problem? Hi and thanks for using 2CarPros.com.

Why are there no reverse gears on my 4L60E?

4L60E has forward gears, but no reverse This is also a pretty common issue with the 4L60E. More than likely the reverse input snap ring has sheared or snapped off. It can also be caused by the sun shell breaking.

What does it mean when your transmission is not in gear?

“I turned the engine off and checked neutral, it was not in gear but tried to go forward as soon as I started the engine.” This sounds like the transmission is just fine, but the selector / shift linkage is broken.

How did the no reverse complaint fit into this scenario?

Also, as stated, there was no reverse gear engagement. Since solenoid ‘E’ is responsible for converter lockup, the code fit that symptom perfectly, and since this code was out there, the fail-safe 2nd gear starts also made sense. How did the no reverse complaint fit into this scenario?

What to do if your gears don’t work?

Dump the fluid, drop the pan, and 5 bolts remove the servo cover/housing. Pull the servo out, take off the E ring and remove pin from servo, then put in new pin and reinstall. Did you find the recommended reading relevant to this discussion?

What causes no 2nd gear on Ford 4R55E?

A low reading means that there is most likely a short in the internal wiring and no reading means the wire is broken. In either case, the solenoid will need to be replaced with a new one. 2) No 2nd or 4th gear: This is often caused by the solenoid regulator valve being out of position.

What causes no reverse on a 4R44E transmission?

Loss of certain gears can occur due to issues in at least two other circuits. Loss of solenoid oil due to end plug leakage can cause no Reverse, and loss or 3rd or 4th and can be repaired with 37947-13K.

What happens if the reverse gear is not engaged?

These transmissions use a servo that engages the reverse gear. If it fails, the transmission will not engage in reverse. It is easy to replace, but it requires the oil pan and valve body to be removed. Incorrect gear shifts, gear slipping or overheating.

What’s the difference between 4R44 and 4R55E transmission?

About This Transmission: 4R44E / 4R55E – The name 4R44E means 4 forward gears, rear-drive platform (or 4WD, with a different tailshaft housing), rated for 440 ft/lb torque (after torque converter multiplication) and electronic shifting. 4R55E is the same but heavier duty and rated for 550 ft·lbs.

What causes no reverse on a Ford 4R55E?

Either the bore in which the intermediate servo pin rides in is worn out, or the spring on the intermediate servo piston is too strong. 6) No reverse: If the transmission has no reverse you most likely have a bad SSA solenoid. 7) Delay going into reverse of a forward gear: Has the valve body been removed recently for any reason?

What causes a transmission leak on a Ford 4R55E?

If so, there is a possibility you did not align it correctly with the alignment pins. This will cause an internal leak that will result in a drop in the transmissions line pressure. No automatic transmission is designed to last forever. The 4R55E is no exception.

Why is my GMC Sierra only getting 3rd gear?

Another thing is, if you keep it in drive you’re only getting 3rd gear, but if you manually shift it into 2nd gear, it’ll go there. That makes taking off much better on the transmission. In either first or second gear, the torque converter slips more than it normally would on a takeoff.

Are there transmission problems with a 2003 GMC Sierra?

After five years, most of the issues with these trucks had been worked out. Now, these trucks are getting older, and it’s very likely that your 2003 Sierra may be having transmission problems. Below, you’ll find a ton of troubleshooting your transmission problems.

Why does my car not shift into third gear?

Such a problem is automatic transmission won’t shift into 3rd gear. The transmission shifts into the first and then to second gear but does not move into the third gear. It seems that the gear slips into neutral when you push it to the third. Another instance could be the automatic transmission won’t shift into 3rd gear at all.

Why is the reverse gear not working on my 4L60E?