Why is my key not turning on my Ford Explorer?

While there are a variety of reasons your Ford Explorer Sport Trac key won’t turn, the most common 3 are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.

What makes a Ford ignition not turn on?

On the inner lock cylinder, you will see a flat bar that sticks out, and about 90 degrees around, a thin piece of sheet metal covering the tumblers. The bar is what keeps the inner cylinder from rotating until the key has been inserted.

What should I do if my ignition key won’t turn?

Average rating from 41 customers who received a Ignition key does not turn Inspection. It can be frustrating when you insert your key into your car’s ignition and it refuses to turn. Your mind races with all the possibilities of what could be going wrong, but luckily, most ignition key issues are not only common, but also quick to fix.

How do you get a stuck ignition out of a Ford?

Now use a small screwdriver, pick tool, or other implement to release the catch on the cylinder body. Insert it into the hole as illustrated, and pull on the handle of the key – the cylinder should slide right out.

What happens when the ignition lock cylinder fails?

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More

What causes a locked steering wheel to not turn in?

If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.

What to do when your key is stuck in the ignition?

Give the wheel a wiggle while lightly trying to turn the key out of the ignition. If the steering lock is causing a bind, this will relieve the pressure and get the key out.

What makes a car key stick in the ignition?

As with a bent key, just start over. Once something rusts, it comes back a lot easier. Debris – If you’ve used your key to clean something off, or gotten food (or other debris) on it somehow, you’ll find that it can pretty easily stick in the ignition lock.

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More

What’s the problem with my 2002 Ford Explorer?

My 2002 ford explorer won’t start I changed my starterd and my battery and my alternater it still won’t start now my 2002 ford explorer won’t cut off when I turn the key ignition switch off what the problem please help me out 10 people found this helpful. Roll driver window down, get out lock door with key, remove key.

What to do if your Ford Explorer is stolen?

Take off the top cover of the steering wheel or theres a little square cover you can pop open with a screw driver. Put the screw driver in the opening and push down on this piece that is spring loaded and pull down on your shifter. Put your car back in Park and start your car! Hope this helps you guys! 10 people found this helpful.

Where is the overide light on a Ford Explorer?

Put the key in the ignition, and turn forward all the way just before cranking. Then within 5 seconds, locate, press and hold in the valet/overide button, found under the dash area, (push button, spring loaded) until the installed LED (the blinking light) in your dash area goes on solid, and the siren chirps once.

Where can I buy a new Ford transponder key?

You can find a new pair of keys for your Ford vehicle for about $20. You can either purchase the keys on Amazon or eBay. Most of the time, they are relatively cheap on those websites. With the help of a dealer, they will, most of the time, charge you about $250 for programming a new transponder key.

What to do if you lose your Ford Pats key?

If you’re out of luck and lost your transponder key and can’t start up the car, you will have to get a new key. This is when you learn how to disable Ford pats system PAT2. The key itself is ridiculously cheap. However, if you have someone set it up, that’s when the price goes up.

How can I learn how to disable Ford PATS system?

How can I learn how to disable Ford pats system to get around the pats system? The first thing you need to do is go to the local dealer and have the keys cut. By getting the keys cut, the new keys will match the original key. This way, you can safely put the key inside the ignition and turn on the engine.

What causes a car key to not turn over?

This can trap a piece of the key inside the cylinder, causing more damage. Also known as a key cylinder, the ignition lock cylinder is another area that could be causing issues with a key turning over. Below are the two most common problems associated with the ignition lock cylinder and the key not turning.

What happens when you remove the key from the steering wheel?

In many vehicles, removing the key locks the steering wheel from turning. Occasionally, because of this lock, the steering wheel can get stuck, which in turn means the vehicle key also becomes stuck and cannot move to release it.

Why does my Ford Explorer Sport Trac not start?

While there are a variety of reasons your Ford Explorer Sport Trac won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter. How is a no-start diagnosis fixed?

Why does my Ford 4.0L explorer not start?

So, when your Ford 4.0L Explorer (Aerostar, Ranger or Mountaineer) Cranks but Does Not Start, it’s because one of these components is missing from the mix.

Why does my car not turn over when I turn the key?

No Crank Condition The engine does not turn over when you turn the key to start your Ford vehicle. This is usually due to: Failed starter motor. Failed neutral safety switch. Failed ignition switch. Locked up engine. This tutorial is geared toward a Cranks but Does Not Start Condition.

Where is the ignition switch on a Ford?

The Lock Cylinder What is often called the “ignition switch” is actually two components: the lock cylinder, and the electric switch. The lock cylinder is the housing into which a vehicle’s starter key is inserted, and the electric switch is located just behind it.

Can a bad ignition switch cause a car to not turn over?

The vehicle will not be able to turn over because the electrical wiring in the electric switch isn’t able to communicate with the battery, and the vehicle’s accessories will function poorly (lights dim or not working). Problems in the vehicle’s lock cylinder will impact the driver’s ability to insert the starter key into the lock housing.

What are the symptoms of an ignition switch failure?

Careful car owners can recognize the symptoms of ignition switch failure before the problem leaves them stranded on the side of the road. An ignition switch performs several functions for a vehicle.

What happens when the ignition switch fails in a car?

When the electrical portion of the ignition switch fails, the vehicle will permanently or intermittently lose power to certain systems and components, depending on which positio… Read More

Why does my car not start when I turn the key?

This problem may be attributed to a circuit that has failed, so no matter how many times you turn the key, the vehicle will not start. If the circuit has not yet completely failed, you may hear a clicking noise as you try to turn the key.

What to do if your Ford Explorer is stalling?

Before troubleshooting any automotive issue, including stalling issues with the Explorer, make sure that you check the vehicles trouble codes with an OBD2 scanner. Trouble codes are always a great place to start diagnosing problems on today’s modern computer controlled vehicles. Without them, you are in the dark. These codes are vital to diagnosis.

Why is my key not turning on my Ford Explorer?