Easy tips

Why does my JCB 3CX not move forward or back?

Why does my JCB 3CX not move forward or back?

It will work for two or three hours then transmission gets hot and will not move forward or back. I have changed oil,filter and checked cooler lines. I have checked for blockage in lines to cooler and have taken the heat exchanger of but there is not a problem there.

Why does my backhoe not move forward or back?

Hi, I have a JCB 3CX backhoe, engine runs fine, machine will work for 10-30 minutes then it will start to loose drive and will then stop and not move forward or back. When left for a few hours it will work again for a few minutes. Hi, I had the same problem with my backhoe there can be three reasons for this problem.

How to buy a Ford Tractor Loader Backhoe?

Doors are open from 9am – 6 pm 7days (later with appointment) Phones availaible 9am-6pm 7days Call 1-855-564-9574 We are interested in purchasing old farm tractors and used equipment!! We Accept VISA MASTERCARD DISCOVER AMERCAN EXPRESS AND OTHERS FINANCING AVAILABLE Ford Tractor Loader Backhoe Shift lockout QuickFix..

What kind of problem does a JCB backhoe have?

Good afternoon, I have a JCB1550B 1987 backhoe. My backhoe has a problem with reverse and forward, the problem Start gradually losing strength in the reverse and forward, the hydraulic system works perfectly, is very strong to excavate, can carry easily with the front loader. Only I have the problem with reverse and forward.

What was the problem with my 1988 JCB 1400b?

I have a 1988 MY JCB 1400B, which I think is similar to your machine (US version, sort of?). I had a similar problem with intermittent forward operation. The problem with my machine was electrical.

What kind of problem does a backhoe have?

My backhoe has a problem with reverse and forward, the problem Start gradually losing strength in the reverse and forward, the hydraulic system works perfectly, is very strong to excavate, can carry easily with the front loader. Only I have the problem with reverse and forward.

Why is my JCB 3CX tractor moving backwards?

Depending on the model of the machine, there is a drain plug (nut) on the side of the transmission underneath the digger. If the mesh gets blocked the fluid cannot passthrough. If your digger is moving forwards and backwards, but feels “weak” this may be it. Rev the digger when driving and it should move faster.

Can a JCB backhoe reverse on start up?

I HAVE A LATE 80,S JCB BACKHOE THAT OPERATES FINE ON START UP BUT AFTER A SHORT TIME THE TRANSMISSION STARTS TO SLIP, USUALLY REVERSE FIRST THEN FORWARDS TILL IT WONT MOVE . EVEN HAPPENS NOT MOVING JU…

I have a 1988 MY JCB 1400B, which I think is similar to your machine (US version, sort of?). I had a similar problem with intermittent forward operation. The problem with my machine was electrical.

How can I tell if my JCB 3CX tractor has a problem?

You may be able to verify if the problem is electrical by verifying that the reverse solenoid is energized by touching it with a screwdriver blade – the blade should be attracted to the body of the solenoid.

https://www.youtube.com/watch?v=ogZ8c0HvMic

Where can I find a JCB Power Shift transmission?

If you go to JCB’s website, www.jcbna.com, they have a dealer locator. I know there are many dealers in the northeast. Click to expand… I am assuming you have a power shift transmission. First check to make sure your battery voltage is >11 volts when this occurs. If it is lower the relays / transmission valves don’t have enough energy to shift.

What to do if your JCB 214 transmission goes bad?

First check to make sure your battery voltage is >11 volts when this occurs. If it is lower the relays / transmission valves don’t have enough energy to shift. Second, check to see if the layshaft relay is functioning. If it is going bad it will sometimes shift into 3rd/4th and sometimes not.

Good afternoon, I have a JCB1550B 1987 backhoe. My backhoe has a problem with reverse and forward, the problem Start gradually losing strength in the reverse and forward, the hydraulic system works perfectly, is very strong to excavate, can carry easily with the front loader. Only I have the problem with reverse and forward.

It will work for two or three hours then transmission gets hot and will not move forward or back. I have changed oil,filter and checked cooler lines. I have checked for blockage in lines to cooler and have taken the heat exchanger of but there is not a problem there.

I HAVE A LATE 80,S JCB BACKHOE THAT OPERATES FINE ON START UP BUT AFTER A SHORT TIME THE TRANSMISSION STARTS TO SLIP, USUALLY REVERSE FIRST THEN FORWARDS TILL IT WONT MOVE . EVEN HAPPENS NOT MOVING JU…

If you go to JCB’s website, www.jcbna.com, they have a dealer locator. I know there are many dealers in the northeast. Click to expand… I am assuming you have a power shift transmission. First check to make sure your battery voltage is >11 volts when this occurs. If it is lower the relays / transmission valves don’t have enough energy to shift.

First check to make sure your battery voltage is >11 volts when this occurs. If it is lower the relays / transmission valves don’t have enough energy to shift. Second, check to see if the layshaft relay is functioning. If it is going bad it will sometimes shift into 3rd/4th and sometimes not.

How to know if your JCB shuttle is moving?

A schematic diagram would help your trouble shooting. Sometimes CD-ROM versions of JCB manuals are offered on Ebay (check the serial # of your machine to make sure it is in the range of #’s covered) Are you certain the shuttle is moving to the forward positin,fully? could it be disconnected,or out of adjustment? Click to expand…

What makes the JCB 409 compact wheel loader so good?

That makes the JCB 409 compact wheel loader indispensable for working in restricted spaces and buildings. • The JCB 409 wheel loader has a comfortable and spacious cab with noise levels lower than our outgoing model. The operating position is designed for optimum all-around visibility, unhindered by components like silencers.

What kind of Hood does a JCB 409 have?

• The JCB 409 has a cyclonic pre-filter which maximizes air filtration and extends filter element service intervals significantly. • A large, single piece hood provides quick and convenient access to all daily check points, as well as the engine bay and cooling pack of your wheel loader.

A schematic diagram would help your trouble shooting. Sometimes CD-ROM versions of JCB manuals are offered on Ebay (check the serial # of your machine to make sure it is in the range of #’s covered) Are you certain the shuttle is moving to the forward positin,fully? could it be disconnected,or out of adjustment? Click to expand…

What kind of backhoe does a JCB 3CX have?

I also have a 1983 jcb 3cx that has power foward and back but hesitates and jerks. it used to be very smooth on take up. any thoughts please. Hello! Good afternoon, I have a JCB1550B 1987 backhoe.

You may be able to verify if the problem is electrical by verifying that the reverse solenoid is energized by touching it with a screwdriver blade – the blade should be attracted to the body of the solenoid.

Author Image
Ruth Doyle