Easy tips

Why are the brake lights on my Chevy not working?

Table of Contents

Why are the brake lights on my Chevy not working?

All the other lights work and I should also mention the brake light on the cab is working, the ones in the housing with the reverse light and blinker are the brake lights not working. every light is working, the turn signals, the back-up lights, the tail lights. The only thing not working is the brake lights.

Where are the 3rd brake lights on a Chevy 1500?

The 3rd brake light is on a seperate circuit from the brake lights . Test for power at the brake switch.Orange is 1 and white is the other,they are next to each on the switch.If that checks out try fiddling with the hazards and turnsinals since the brake light power flow goes form the brake switch to the turnsignals.

Why is the third brake light out but the lower lights still work?

If only the third light is out and the lowers still work, see if it will flash with the emergency-flashers. If the inoperative third light flashes, with the emergency flashers, a fuse is the most likely cause.

Is the emergency brake light always on on a Chevy Silverado?

1988 chevy silverado The light on my dash for the e-brake is always on but the brake is not engaged. It has been like this since I bought the truck.

Why is my brake light not working on my Chevy Silverado?

Chances are the cause of the defective light or brake lights circuit on your Chevy Silverado is a simple problem. Moreover, you can blame most of these problems on little or no maintenance, according to James E. Duffy in “Modern Automotive Technology.”

What to do when your third brake light is not working?

When the lower lights do not come on and only the third-brake light works, the brake-light switch may be ruled out. Again try the emergency-flashers to check for wiring, socket and lamp problems. If the flashers work, check for blown fuses as a few vehicles use separate circuits for the lower and third brake lights.

What causes brake lights to go out but lower lights work?

If the plunger of the switch does not contact the pedal, check for an adjustment. In rare instances, the brake booster may fail, and the pedal will not rise enough to contact the switch. Pull up on the brake pedal and if the lights go out, switch mis-alignment or pedal position error is the likely cause.

Why is the brake light on in my Chevy Impala?

Either the brakes need bled, or there is a leak. Since you’ve already checked the emergency brake handle, now it’s time to check the master cylinder and see if the brake fluid is low or not. Now if it is low, but not empty, adding more may provide a temporary fix.

Is it dangerous to drive with brake lights not working?

Driving at night with either brake lights or tail lights not working is dangerous for you and other drivers on the road. It takes a long time to notice when the brake lights not working but tail lights are or vice versa. It is so because you won’t know what is happening in the backside while driving until someone points it out.

Where are the brake lights on my car?

You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights.

Why are my brake lights not working on my 1997 Chevy?

Pull the plastic cap off the fuse chassis and you’ll see a square relay fuse switch and replace it for the brakes. It’s only $13 bucks and is the predominant issue with 1997 Chevy Trucks and the brakes not working especially if you reverse and blinker lights do work. Was this answer helpful? Its the taillight circuit board or a broken wire.

How to fix no brake lights Chevy Trailblazer?

Chevy Trailblazer- No Brake Lights! It’s an easy fix.. – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

Why does my brake light work when I Turn on the turn signal?

For that to work, the brake wire runs to the turn indicator, so that when you turn on the flashing turn signal, it switches out the brake light signal for that side so that the two signals don’t collide. So don’t just check the brake light. Also check the turn signals.

What should I do if my brake lights dont work?

Solder and shrink tube the new wire to these pigtails and give it a test. If you are unsure of the wire color associated with brake light function, you can access wiring diagrams online, but be warned, chev/gm have been known to change color codes from time to time.

All the other lights work and I should also mention the brake light on the cab is working, the ones in the housing with the reverse light and blinker are the brake lights not working. every light is working, the turn signals, the back-up lights, the tail lights. The only thing not working is the brake lights.

How do you turn off the brake light on a Chevy Silverado?

The only way to turn the brake light off is to restore proper line pressure to both brake circuits when the pedal is pushed. If your Silverado is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic.

The 3rd brake light is on a seperate circuit from the brake lights . Test for power at the brake switch.Orange is 1 and white is the other,they are next to each on the switch.If that checks out try fiddling with the hazards and turnsinals since the brake light power flow goes form the brake switch to the turnsignals.

How do you know if your Chevy has a brake problem?

You will find the booster between the master cylinder and the firewall in your engine compartment. A check valve that is faulty can also let vacuum bleed out. You can diagnose this by starting your Chevy in order to build vacuum, and then turning it off for four or five minutes. Then you should try the brakes.

For that to work, the brake wire runs to the turn indicator, so that when you turn on the flashing turn signal, it switches out the brake light signal for that side so that the two signals don’t collide. So don’t just check the brake light. Also check the turn signals.

What to do if there are no brake lights?

Cut repair costs, not quality. Here is some info for you. Fuse No.1 is for your brake lights and your hazard lights. If no lights after fuse, if found blown, is replaced check your light globes. If nothing works check that the fuse hasn’t blown again. Fuse 16 is for the turn lights.

Why are my brake and turn signal lights not working?

Having issues with your taillights, brake and turn signal lights or reverse lights? All issues are covered here: fuses, bulbs, bad grounds, broken, burnt or pitched wires and bad connections. Keep your patience, watch the video and we can find it and fix it. Loading…

Why are the brake lights on my Chevy 1500 not working?

I have a 1994 Chevy 1500. Brake lights are not working. I replaced the bulbs and the brake light switch. All the other Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them.

Where is the brake light switch on my car?

Fuse Box and Light Switch. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm.

Where are the fuse panels on a Chevy Silverado?

Here you will find fuse box diagrams of Chevrolet Silverado 2014, 2015, 2016, 2017, 2018 and 2019, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

What are the symptoms of a bad brake light switch?

The most common symptom of a faulty brake light switch is when brake lights don’t come on or stay on all the time. A faulty brake light switch can cause many problems. If a switch is bad, the brake lights won’t operate and the transmission shifter will not come out of “Park” position.

Where are the brake lights on a Chevy Silverado?

Check the Brake Lights Circuit. Start at the fuse box under the hood and make sure the brake lights fuse is not blown, that the terminals are free of corrosion and that the connections are tight. Then check the brake light switch on the bake pedal arm. Back probe the switch terminals with a test light.

Why are the wires on my relay not clicking?

But if it’s not clicking, the problem could be in the relay itself or in the wiring. You need to figure out which. To test the relay itself, take two wires, each about a foot long with a female spade terminal at one end and stripped at the other end.

The most common symptom of a faulty brake light switch is when brake lights don’t come on or stay on all the time. A faulty brake light switch can cause many problems. If a switch is bad, the brake lights won’t operate and the transmission shifter will not come out of “Park” position.

Where is the brake light switch on a car?

When the brake pedal is pressed, it closes the switch, and the current flows through the wiring to the brake lights. This turns on the rear brake lights. The brake light switch can also be located on the master cylinder. Hydraulic pressure from the master cylinder brake light switch system can close the switch to turn on the brake lights.

Can a bad brake light switch drain your battery?

Note that a bad brake light switch can potentially drain your battery if the light stays on, and it can also decrease your rear brake light lifespan.

Where is the brake light switch on a 1998 Silverado?

The brake light switch is on the arm from the brake pedal to the brake booster (under the hood). It is held in place by a snap clip that is nearly impossible to get off, so don’t. Buy your switch and a new snap clip and then take a large screwdriver and shove it between the top of brake petal and the switch.

Where do the brake lights go in a car?

The way those taillights work theres a white wire under dash on the column that white wire is for brake light. So the way the brake lights work they go through a relay and through blinker switch.

Check the Brake Lights Circuit. Start at the fuse box under the hood and make sure the brake lights fuse is not blown, that the terminals are free of corrosion and that the connections are tight. Then check the brake light switch on the bake pedal arm. Back probe the switch terminals with a test light.

What should I do if my brake light wont turn on?

Only one of the switch terminals should turn on the test light. When you depress the brake pedal, both switch terminals should turn on the test light. If only one of the wires turns on the test light, unplug the switch and jump the two connections at the connector.

The way those taillights work theres a white wire under dash on the column that white wire is for brake light. So the way the brake lights work they go through a relay and through blinker switch.

Why are the rear lights on my 91 k1500 not working?

I had the same problem on my 91 K1500. The most common reason rear lights of any kind will fail is rotted wires. They run through wire shroud from front to back along the inside of the frame to the left tail light. Running this way leaves them exposed to the elements.

The brake light switch is on the arm from the brake pedal to the brake booster (under the hood). It is held in place by a snap clip that is nearly impossible to get off, so don’t. Buy your switch and a new snap clip and then take a large screwdriver and shove it between the top of brake petal and the switch.

Why are the brake lights not working but the tail lights are?

Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.

Author Image
Ruth Doyle