Who is the manufacturer of the John Deere 310 backhoe?

MODEL: 310 Loader Backhoe THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT’S SUCCESSORS. JOHN DEERE AND IT’S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY OF THIS MANUAL.

What is the service manual for a John Deere backhoe?

John Deere 310 Backhoe Service Parts Manual Only later lesson the writ John deere 310 backhoe service parts manual 6677546C you receive no again quizs annoys you ? http://www.banquetbooks.com/cruiser/john-deere-310-backhoe-service-parts-manual-6677546.pdf

Where can I find the John Deere 310sg service manual?

John Deere 310sg Service Manual Espa Ol JOHN DEERE 310SG MANUAL John Deere 310sg Manual Manual Secret. JOHN DEERE 310SG MANUAL. DOWNLOAD: JOHN DEERE 310SG MANUAL. Getting John Deere 310sg Manual ? http://doc233.myadha.com/john-deere-310sg-service-manual-espa-ol-ejdojfv.pdf

Where can I buy a John Deere backhoe loader?

Have something to exchange? we would gladly discuss the details of exchange or purchase. For proper operation, quality and timely maintenance of backhoe loaders John Deere 300D, 310D, 315D, you should purchase this PDF technical manual.

What is the Technical Manual for a John Deere backhoe?

This technical manual contains detailed service information, special instructions for repair and maintenance, technical specifications, diagrams, service and other additional information for backhoe loaders John Deere. Technical manual comes in PDF and includes 1393 pages, which are printable.

What’s the name of the John Deere backhoe?

Title 310D Backhoe Author John Deere Subject Backhoe brochure Keywords john deere backhoe, deere backhoe digger, john deere backhoe specs, 310d specs, 310d backhoe Created Date

Are there any photos of the John Deere 310D?

No photos of the John Deere 310D are currently available. To submit yours, email it to [email protected]. Photos may only be used with the permission of the original photographer. Steering press. Full dimensions and tires

What is the repair manual for a John Deere backhoe loader?

For proper operation, quality repair and timely maintenance backhoe loaders John Deere 310SE and 315SE, you must purchase this service manual. Repair manual includes full maintenance manuals, repair instructions, service manuals, installation instructions, wiring diagrams for backhoe loaders of John Deere.

Is the John Deere backhoe loader 315sk easy to maintain?

Backhoe loader 315SK is easy to maintain: the presence of the fault code is displayed on the monitor and a detailed description of the problem, and almost all service points accessible from the ground, which not only facilitates the diagnosis but also reduces machine downtime.

How much horsepower does a John Deere backhoe have?

Transmission details John Deere 310 Power Engine (gross) 52 hp 38.8 kW Engine (net) 53.2 hp 39.7 kW Mechanical Chassis 4×2 2WD Steering

Technical manual contains detailed technical information required by the rules of operation, maintenance, repair manuals, the safety. This technical guide helps you to operate, maintenance, troubleshoot and repair backhoe loaders John Deere 310G.

What kind of diagnostic software does John Deere use?

John Deere Advisor Diagnostic software works with genuine JD EDL v3 kit, you can download the whole app on USB HDD with the International shipping.

When to get parts for a John Deere backhoe?

I’m looking for (describe parts) for a 310A John Deere Backhoe. Receive 3% off for joining our monthly discounts email newsletter. Parts specialists are available from 8am to 5:30pm EST.

How to get replacement parts for John Deere 310A?

We sell a wide range of new aftermarket, used and rebuilt 310A replacement parts to get your machine back up and running quickly. Give us a call, submit an online quote request or select a category below to browse/select a part. Prices shown are estimates and will vary depending on condition and availability.

How do you remove a boom extension from an Extendahoe?

To remove the boom extension you will have to remove the end cylinder pin and the wear pads so the boom section will slide out. Once the section is out you can remove the cylinder by disconnecting the lines and removing the upper pin. Then the cylinder will slide out of the main boom. Reply back if you need further help.

Why does my John Deere 310D not reverse?

If your oil is low in the reverser (dipstick in door in front of windshield, right side) you may have this type of problem. But the dipstick under the floor is your 4 speed transmission and axle, final drive and brake system. The tank in that door in front of windshield is you hydraulic reservoir.

Where can I find a John Deere backhoe?

Engine details Transmission details No photos of the John Deere 310D are currently available. To submit yours, email it to [email protected]. Photos may only be used with the permission of the original photographer. Steering press. Full dimensions and tires

What is the Technical Manual for a John Deere backhoe loader?

TM10131 – John Deere 310SJ Backhoe Loader (S.N. -159759) Technical Manual (Operation & Test).pdf Complete technical manual with Electrical Wiring Diagrams for John Deere 310SJ Backhoe Loader (S.N. -159759), with all the shop information to maintain, diagnostic, repair, service like professional mechanics.

What are some common John Deere transmission problems?

Common John Deere transmission issues can vary by model, but a typical issue is the machine not moving with the engine running. One cause of this issue is the transmission oil being low. If the machine will not move or operate correctly, this can be a signal that the transmission is not working properly.

Where can I find a John Deere manual?

Troubleshooting manuals for John Deere machines can be found on the John Deere website, Deere.com. Manuals are offered for a variety of makes and models. When Was the First Memorial Day?

What kind of transmission does a John Deere backhoe have?

4-speed,helical cut gear,collar shift transmission synchronized in all gears with hydraulic reverser

How to get parts for a John Deere backhoe?

Give us a call, submit an online quote request or select a category below to browse/select a part. Prices shown are estimates and will vary depending on condition and availability. I’m looking for (describe parts) for a 310E John Deere Backhoe.

How to repair a John Deere backhoe loader?

John Deere 300D, 310D, 315D Backhoe Loaders Repair Service Manual (TM1497) TM1497 – 300D, 310D, 315D Backhoe Loaders Technical Manual (Repair).pdf

Transmission: Manual shift with first and second speeds having sliding collar engagement and third and fourth speeds engaged with cone-type synchronizers. Single shift lever, floor mounted. Travel Speeds: With standard 17.5L-24 rear and 11L-15 front tires

How do you seal a John Deere hydraulic cylinder?

Remove the external snap ring with snap ring pliers, and drive the rod guide into the cylinder past the snap ring groove with a wooden dowel. Clean any debris from the snap ring groove, and install the filler ring from the cylinder seal kit into the groove. Pull the rod end from the cylinder barrel and secure it in a soft-jawed vise.

What’s the best way to remove water from a transmission?

Place a section of rubber hose over the line and route the line to a drain pan. Add five to seven quarts of new fluid to the transmission, based on the manufacturer’s service recommendations. Start the engine and allow it to run for several minutes while judging the amount of transmission fluid that is discharged into the drain pan.

When does water get into the transmission fluid?

When water gets into the transmission from a flood or from an accident, you have no reason to believe that there is another issue causing water to leak into the transmission fluid.

Where can I find John Deere 310A parts Manual?

310A and 3108 Tractor, Loader and Backhoe Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT’S SUCCESSORS. JOHN DEERE AND IT’S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY OF THIS MANUAL.

What are the trade names for John Deere backhoe loaders?

TRADE MARKS AND TRADE NAMES CONTAINED AND USED HEREIN ARE THOSE OF OTHERS, AND ARE USED HERE IN A DESCRIPTIVE SENSE TO REFER TO THE PRODUCTS OF OTHERS. JD-P-PC1930 310A AND 3108 BACKHOE LOADER PARTS CATALOG 310A AND 3108 BACKHOE LOADER PC1930 1A2 310A AND 310B BACKHOE LOADER TP5459 INTRODUCTION AND CUSTOMER INFORMATION

Who is the author of John Deere tractor parts Manual?

THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT’S SUCCESSORS. JOHN DEERE AND IT’S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY OF THIS MANUAL.

Where can I buy rebuilt John Deere backhoe parts?

Rebuilt parts such rebuilt torque converters, reversers, injection pumps, water pump, and rear ends can also be found on Broken Tractors web site. They all are covered by our warranty and often in stock for fast shipping. We now offer cab glass most enclosed cabs.

What kind of hydraulic pump does a John Deere backhoe use?

Broken Tractor now carries John Deere backhoe hydraulic pumps for the 310, 310A, 310B, 310D, 310E, 310G, 310J, and 310K models. Our JD hydraulic pumps and couplers are new. Our reverser rebuild kits are OEM Borg Warner parts. Rebuilt torque converters are normally used when rebuilding a John Deere backhoe reverser.

How to send a backhoe loader safety message?

SENDTO: JohnDeereDubuqueWorks 18600SouthJohnDeereRoad Attn: Publications,Dept. 324 Dubuque,IA52004-0538 USA FAXNUMBER: 1-563-589-5800(USA) PublicationNumber: PageNumber: Ideas,Comments: Name: Phone: EmailAddress: THANKYOU! 020113 PN=4 Contents Page Safety—SafetyAndOperatorConveniences

Is there such a thing as a backhoe loaderengine?

OMT210365ISSUEB3 (ENGLISH) CALIFORNIA Proposition65Warning Dieselengineexhaustandsomeofitsconstituents areknowntotheStateofCaliforniatocausecancer, birthdefects,andotherreproductiveharm. Ifthisproductcontainsagasolineengine:

What’s the difference between a JD reverser and a case?

The only difference I saw in the JD reverser’s internal parts and Case was that JD uses a fiborous reverse lining and Case is solid sintered brass, The Case front pump will work as well but I stayed with a JD converter because of differences in engine ratings, etc.

Do you have to remove the torque converter in a 1993 John Deere backhoe?

Do you have to remove the torque converter when you remove and replace the reverser unit in a 1993 John Deere 310D Backhoe? All the info I see in manuals show pulling the reverser and torque converter as a unit. Although I don’t yet need to do this I would also like to know the answer to this question.

Is the Borg Warner reverser the same as the John Deere reverser?

Although I don’t yet need to do this I would also like to know the answer to this question. Any one that knows the old Case backhoes will also be able to help as the 580s built throughout the 1980s use the same Borg Warner reverser so the process should be the same.

Can a Deere 310D move in reverse but not forward?

Some small pad shavings & oil has slight burn smell and is dirty. Deere 310d will move in reverse, but not in forward. Some… We have a JD 410 Backhoe. The hydraulics got really slow and We have a JD 410 Backhoe. The hydraulics got really slow and weak. I checked a number of things and the problem I found was this: I … read more

Can a John Deere backhoe go forward or reverse?

It was parked for the winter and not worked for approximately 6 months but was started every month or so but not physically moved . We’ll we decided to pour concrete where the backhoe was so we would have to move it to do so. Went out cranked it fired right up , but no forward or reverse.

How big is the steering wheel on a John Deere backhoe?

John Deere Steering Wheel Center cap not included. Use OEM center cap. 16.5″ Diameter 7/8″ 36 spline hub 2.50″ ID For Cap 36 Splined Tapered Hub Replaces John Deere Part #’s AR78405, AL28457 Fits Backhoe 210C, 310, 310C, 315C, 410,…

What kind of engine does a John Deere backhoe have?

The John Deere 310J is a 2WD or 4WD backhoe loader tractor manufactured by John Deere from 2007 to 2011. The John Deere 310J is equipped with a 4.5 L (275.0 cu·in) four-cylinder diesel engine and a full powershift transmission with 4 forward and 2 reverse gears.

How does a John Deere backhoe loader work?

Mechanical front-wheel drive with: Offset driveshaft for better ground clearance Extendable dipperstick Full-power-shift reverser Torque converter Single-lever loader control Two-lever backhoe control Two-lever stabilizer control with anti-drift lock- outs I Nm lb.It 271

What are the specifications of a backhoe loader?

310C BACKHOE LOADER SPECIFICATIONS Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE standards.

What kind of gear does a John Deere backhoe have?

4-speed helical gear, synchronized in all four gears, collar shift transmission with hydraulic reverser

What’s the best way to reverse a John Deere?

Put the shaft vertically in a vice and let it down to the slight raise at the hub, protected from damage of course, Leave the bearing out of the drum and you will have the flexibility to wiggle the splines into the plates. When the drum is down then install the bearing and snap rings. The first one I did I really made a fool out of myself.

What does the information light on a John Deere 310D mean?

The “information” light comes on, alarm and stop lights come on, when the key is released back to the “on” position after trying to crank, the “information” light and ALT warning light stays on. When the key switch is turned, power comes out of the switch on the crank terminal, goes through the fuse (which is good) and into the neutral relay.

Where is the ignition switch on a John Deere 310D?

There is a black plastic box under the ignition switch, it has about 5 or 6 wires running into it and out of it. It is bolted to the framework under the removeable panel that houses the ignition switch, accessory switches, fuse and relay panel.

Why is my John Deere 310D not cranking?

The hoe will not crank the when the key is turned, the alarm just sounds and the stop light comes on. The hoe will start and run just fine if you jump the solenoid on the starter, however. I am trying to diagnose the source of the electrical problem preventing the key from cranking the machine.

What’s the serial number on my John Deere backhoe?

I am working on my neighbor’s John Deere backhoe model 310D, serial# TO310DG813560. The hoe will not crank the when the key is turned, the alarm just sounds and the stop light comes on.

What are the hydraulic issues on a John Deere tractor?

Problem still remains with the hydraulics tho. Power steering works, shifts fine with no issues, and the PTO turns and seems to have no issues. Problem arises from the loader and the 3PH. The 3PH will raise but will not stay in place at all unless u crank the knob down on the lock.

How old is the hydraulic pump on a John Deere backhoe?

Discussion in ‘ Tractor/Loader/Backhoes ‘ started by telwood, Sep 6, 2016 . I’ve got a John Deere 410 backhoe with an hydraulic problem I am trying to troubleshoot. The Hydraulic pump seems much newer than the machine. The manual says it should be 1800psi on the pump output.

Are there hydraulic issues on a John Deere 950?

Screen has been pulled, and clean, wasn’t really dirty or look like it had much of anything obstructing it. It has had a complete drain and refill with a brand new filter. 3 hoses on the loader that appeared to be slightly damaged but never showed any signs of leaking were replaced as well just to be on the safe side.

How to troubleshoot a John Deere hydraulic pump?

As you check the oil, make sure that the reservoir air vent cap is plugged. Low system-pump oil flow may be as a result of air leaks in the pump inlet line and fittings. If this is the problem, you should replace the parts as and when necessary. Check the relief valve to see whether it is partially left open and close it in case it is open.

When to see a John Deere hydraulic repair company?

In case you cannot fix the problem on your own, you should see a John Deere dealer for SCV coupler repair. There is a lot that goes into ensuring that your tractor performs optimally. To keep your tractor hydraulics in perfect shape and working properly, you should work with a reliable hydraulic repair company.

What are the symptoms of a hydraulic problem?

The symptoms of the hydraulic issue will be an SCV that intermittently fails to flow oil in the required direction. Resolving the problem will involve checking whether the male hydraulic tip has failed or the female coupler is damaged. Male tip failures may be as a result of the internal poppet or ball stop being damaged or moving out of position.

Technical manual contains detailed service and maintenance information, special instructions for repair and maintenance, schematics and diagrams for John Deere backhoe loaders 310A and 310B. Technical manual is a system of assistance in the service and repair, which allows to detect and resolve problems arising and uncertainties.

What’s the serial number on a John Deere backhoe?

serial number deere backhoe Serial Number Location for John Deere Backhoe Models: 210C, 300B, 301A, 302A, 310A, 310B, 310C, 310D, 310E, 310SE, 310SG, 401B, 401C, 401D, 410B, 410C, 410D, 410E, 410G, 500C, 510B, 510C, 510D, 610C, 710B, 710C, 710D, 310K, 310SK, 315SK, 410K, 710K

What kind of engine does a John Deere backhoe loader have?

The John Deere 310B is a 2WD backhoe loader tractor from the series. This tractor was manufactured by John Deere in Dubuque, Iowa, USA from 1982 to 1986. The John Deere 310B is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and a power shuttle transmission with 8 forward and 8 reverse gears.

Where is the VIN on a Deere backhoe?

On 17 digits models the VIN plate will be in the same location but the full VIN will be stamped in near the plate, but not under it.

What does the John Deere parts Manual say?

Parts manual includes a full catalog of spare parts, technical information on spare parts, spare parts books, parts management, intended for backhoe loaders John Deere. The catalog contains a detailed list of spare parts and accessories John Deere, the catalog contains detailed drawings.

How many pages are in a John Deere backhoe loader manual?

This manual is a file PDF, which contains 780 pages, any one of which we can be printed easily. We recommend to use Adobe PDF Reader, to be sure all images / graphics will display correctly. This manual is written for an experienced technician.

Where can I find John Deere Excavator parts?

Detailed list of parts and accessories for excavators loaders John Deere 310G, 310SG, 315SG, you can find in the catalog of original spare parts, which is presented on our website. Parts manual includes full catalog of spare parts, technical information on spare parts, spare parts books, parts managment, intended for backhoe loaders John Deere.

What should I do if my John Deere tractor wont start?

If the choke is manual in your tractor, be sure to turn it on. Don’t keep it turned on when the engine runs for more than 5 minutes. Press the primer bulb about 4 times. Be sure to clean the air filter before you attempt starting the engine. Foam type air filter requires washing and rinsing.

Where can I find parts for a John Deere backhoe?

Where are the John Deere backhoe parts made?

Our backhoe cylinders are also made in the USA. The bucket cylinder, boom cylinder, dipper cylinder, and outrigger or stabilizer cylinder are all built to interchange directly with the OEM backhoe hydraulic cylinders so that every part of each cylinder will match original equipment parts available from any John Deere dealer.

How big is a John Deere backhoe bucket?

We stock new John Deere backhoe buckets ranging in size from 13-Inch to 48-inch. Our backhoe cylinders are also made in the USA.

How does a John Deere K Series backhoe work?

3RZHU&XUYHERRPdVMREURYHQGHVLJQ begins wide at the base and narrows through the line of sight for unrestricted YLVLELOLW\,WVSURYHQJHRPHWU\SURYLGHV smooth and consistent control throughout the digging arc. 1 2 3 6 7 6KLIWSURGXFWLYLW\ into a higher gear.

What kind of recirculator does a John Deere backhoe use?

It HPSOR\VHOGURYHQFRROHGH[KDXVWJDV recirculation (EGR) for reducing NOX, DQGDGLHVHOSDUWLFXODWHOWHU’3)\fDQG GLHVHOR[LGDWLRQFDWDO\VW’2&\fWRUHGXFH particulate matter. 310K EP meets EPA IT4 standards with- RXWDIWHUWUHDWPHQWFRPSRQHQWVDQG’3)V ,WdVDQH[FHOOHQWFKRLFHIRUODUJH HHWVDQG rental yards.

It HPSOR\\VHOG\URYHQFRROHGH[KDXVWJDV recirculation (EGR) for reducing NOX, DQGDGLHVHOSDUWLFXODWHOWHU\’3)\\fDQG GLHVHOR[LGDWLRQFDWDO\\VW\’2&\\fWRUHGXFH particulate matter. 310K EP meets EPA IT4 standards with- RXWDIWHUWUHDWPHQWFRPSRQHQWVDQG’3)V\ ,WdVDQH[FHOOHQWFKRLFHIRUODUJH HHWVDQG rental yards.

How big is a John Deere K-Series backhoe?

3. 3RZHU&XUYHERRPdVMRE\URYHQGHVLJQ begins wide at the base and narrows through the line of sight for unrestricted YLVLELOLW\\\,WVSURYHQJHRPHWU\\SURYLGHV smooth and consistent control throughout the digging arc. 1 2 3 6 7 0D[LPL]HYHUVDWLOLW\\\HQGWRHQG\

How big are the wheels on a John Deere hydrostatic transmission?

A brand new Tuff Torq K66 Hydrostatic transmission. A new set of 23″ x 10.50″ – 12″ wheels and new U. S. Made Carlisle “Turf Tamer” tires. (Pictured in listing) All the required various Genuine John Deere transaxle installation parts. All the parts, even the nuts and bolts are neatly bagged and identified.

What should I do if my John Deere gear pump is not working?

The relief valve could also be damaged. For this problem, consult your John Deere dealer. For problems with the boom arms not rising or lowering correctly, it could mean that the gear pump is damaged. Consult your John Deere dealer for this problem.

Troubleshooting manuals for John Deere machines can be found on the John Deere website, Deere.com. Manuals are offered for a variety of makes and models. When Was the First Memorial Day?

310C BACKHOE LOADER SPECIFICATIONS Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE standards.

Is the John Deere power reverser still working?

It does not fail while in motion. I took it into John Deere a few weeks ago and they said it was out of calibration and they re-calibrated it with a computer. It appears to do ok when sitting cold. Mornings have been rather cool in the low 70s but seems like the warmer it gets the worse it gets.

Why is my shift lever falling off my Ididit steering column?

When repositioning the lower shift lever on your ididit column shift column, make sure you re-install the supplied LOCK WASHERS and SCREWS. If they are not securely installed, the lower shift lever may vibrate loose, allowing it to fall off the column.

Why does my reverser on my tractor not work?

Power reverser randomly dose not work / when it gets below 20 degrees I get an error code PTR A with no code # / the tractor starts but will not have any power steering and will not move forward or reverse. The problem goes away when I turn the tractor off and restart.

When was the John Deere backhoe loader made?

The John Deere 310E is a 2WD or 4WD backhoe loader tractor manufactured by John Deere from 1997 to 2001.

I am working on my neighbor’s John Deere backhoe model 310D, serial# TO310DG813560. The hoe will not crank the when the key is turned, the alarm just sounds and the stop light comes on.

4-speed,helical cut gear,collar shift transmission synchronized in all gears with hydraulic reverser

Why did my backhoe stop when my loader stopped working?

There were no signs of any problems at all when the loader stopped working and the backhoe got weak (no jerking or anything else). It was like flipping a switch, now they work, now they don’t. There was no screen in the port on the pump where the shavings were.

What to do about slow hydraulics on a backhoe?

If jerky, that is a sign of low oil flow and cavitation. If transmission pump flow is good, then I would remove the pressure control valve (priority valve) to see if any of the metal shavings are trapped there. Then flush out the line between the pump and pressure control valve before installing new pump. Click to expand…

What to do when your loader stops working?

The loader stopped working at all. The first thing I did was check the output pressure of the pump. It was only about 800 PSI. Next thing I did was to try adjusting the output pressure with the adjusting screw on the port on the bottom of the destroke control valve on the hydraulic pump.

How to get replacement parts for John Deere 310sg?

We sell a wide range of new aftermarket, used and rebuilt 310SG replacement parts to get your machine back up and running quickly. Give us a call, submit an online quote request or select a category below to browse/select a part. Prices shown are estimates and will vary depending on condition and availability.

Where are the boom cylinders on a backhoe?

Backhoes have either 1 or 2 of the boom cylinders and their main function is to angle the boom section of the backhoe in or out. On some older backhoes the boom cylinder is inside the boom itself.

How is a bucket cylinder attached to a backhoe?

The Dipper cylinder (also called the Arm, Crowd, or Stick) is attached on one end to the boom and the other to the dipper (Arm, Crowd, or Stick) and articulates the dipper in and out. The Bucket cylinder is attached on one side to the dipper and the other to the bucket linkage or coupler.

Where is the hydraulic coupler on a backhoe?

It is usually found near the lift cylinder, but does not provide the main lifting force. A hydraulic coupler is installed at the end of the dipper to allow the operator to quickly change between backhoe bucket attachments. If your machine is equipped with one it can be found at the end of the dipper connecting it to the backhoe bucket.

How many hours does a John Deere backhoe take?

Hours: 6,198 (Accurate?: Unknown) 1997 JOHN DEERE 3 LEVER BACKHOE MODEL 310-SE- WILL START WITH JUMP. SOLD AS IS WHERE IS 1997 John Deere 310SE Backhoe, 8239 Hrs., 4WD, Cab w/Heat, Standard Backhoe, Call For More Details. Powertrain 4X4 Buckets 24″ Bucket Tires 19.5 Tires 4WD

When did John Deere backhoe loader come out?

Good condition John Deere 310SE Backhoe Loaders available between 1997 and 2001 years. Located in USA and other countries. Click request price for more information.

What kind of tires does a John Deere backhoe have?

Powertrain 4X4 Buckets 24″ Bucket Tires 19.5 Tires 4WD Open canopy, 4 wheel drive, manual coupler with 24”wide backhoe bucket with good teeth.. 84”general purpose loader bucket with bolt on cutting edge. 19.5R-24 rear tires with 80% remaining.

Complete official Operation & Test manual with wiring diagrams for John Deere 310SG and 315SG Backhoe Loader, with all the shop information to maintain, diagnostic, repair, refurbish/rebuild like professional mechanics. * Numbered table of contents easy to use so that you can find the information you need fast.

What is the manual for a John Deere forage harvester?

John Deere 800, 830 Self-Propelled Windrowers Technical Manual (TM1050) John Deere 5200, 5400 Self-Propelled Forage Harvester Technical Manual (TM1066)

Hello Bob, I will see if I can be of some assistance. The John Deere 310 backhoe utilizes a forward/reverse shuttlte, similar in operation to an automatic transmission (except the shuttle only has forward and reverse, the transaxle handles the variours gear ratios).The reverser is seperate of the transaxle.

What’s the problem with my John Deere backhoe?

I have a John Deere 310 backhoe with shuttle shift on the column. The drive response is very weak, tractor will move OK in low range gears but will not in high range gears. Very sluggish. We are changing fluids and filters to see if that helps. Doesw the trans have clutches and/or torque converter? What else could the problem be?

What kind of clutch does a 310 backhoe use?

Your 310 uses a standard clutch/pressure plate assy mounted on the engine flywheel, which I would suspect is at fault.. The tractor will have to be split to service any of the above components.

What is the repair manual for a John Deere lawn tractor?

John Deere Front Wheel Drive Axles 730 , 733 , 740 , 745 , 750 Component Technical Manual (CTM4820) John Deere 110 and 112 LAWN GARDEN TRACTOR Service Repair Manual (Serial No. early to 100,000) John Deere 110 and 112 LAWN GARDEN TRACTOR Service Repair Manual (S/N: 100001 to 250000)

What is the Technical Manual for a John Deere crawler?

John Deere 350B Crawler Tractors & Crawler Loaders Technical Manual (TM1032) John Deere 800, 830 Self-Propelled Windrowers Technical Manual (TM1050)

3RZHU&XUYHERRPdVMRE\URYHQGHVLJQ begins wide at the base and narrows through the line of sight for unrestricted YLVLELOLW\\\,WVSURYHQJHRPHWU\\SURYLGHV smooth and consistent control throughout the digging arc. 1 2 3 6 7 6KLIWSURGXFWLYLW\\ into a higher gear.

Where can I find the John Deere operator’s manual?

Choose the hyperlinked Operator’s Manual. 5. View Maintenance and Service Interval on the left-hand side of the publication. Visit the John Deere Technical Information Store to purchase a technical publication, operator manual paper copy or view the AMS Operator Manuals PDFs. For Technical Information Store customer assistance, call 1-800-522-7448.

What is the manual for a John Deere feller buncher?

John Deere JD743 Tree Harvester, JD743 Feller-Buncher Technical Manual (TM1159) John Deere 5440 & 5460 Self – Propelled Harvesters Technical Manual (TM1177)

Where can I find a John Deere 3203?

Thank you! John Deere 3203 Compact Tractor – 1286 Hrs. Showing, 4×4, hydro, 3 point, 540 pto, Sn# LV3203H497777 / Onsite Lot # 1791

How big can a John Deere backhoe get?

Before you dig into anything, know this: the 370B Backhoe is ready for our 2018 and 2019 3E Compact Utility Tractor lineup. Now, let’s dig in. These Backhoes have a reach of nearly 10 feet (3 m) and can dig down 6 feet 10-inches (2.03 m).

What kind of tires do I need for a John Deere backhoe?

The 310 series John Deere Backhoes need tires that can handle the jobs tough enough to handle the reputation John Deere Backhoes are known for. When you need a tough job done right, Monster Tires provides you with the high-quality tires that are needed for any circumstance.

What to do with a 2005 John Deere backhoe?

Legend equipment sales 2005 John Deere 310 Backhoe 4X4 Front Tires are 90% Rear tires are NEW ( no wear just put on ) Install new tubes in rear tires New Seat Cushion No broken Windows No Quick Coupler Extended Hoe No Aux. Hydraulics Oil changed and Filters NO A/C Extendable Boom 2- new Batteries Super Clean Hrs ??

Where is the John Deere 310 SJ loader located?

2009 John Deere 310 SJ loader backhoe with 4 in 1 front bucket, very low hour machine, clean and tight; just had 4,000 hours complete service. Machine is located in Edmonton AB.

What kind of rear differential does John Deere use?

John Deere Rear Differential Assembly 1/2″ Rivet Holes Backhoes 300, 300B, 301, 302, 310, 310A, 310B, 310C, (310D Before Serial Number 796853), 400, 401, 410, 410B, 410C Tractors 820, 830, 920, 930, 1020, 1030, 1130,…

What kind of tractor is a John Deere backhoe?

Tractors> John Deere> 310E backhoe-loader Tractors Lawn Tractors Compare Articles/News Tractor Shows Contact John Deere 310E Overview Engine Transmission Dimensions Photos Attachments 1997 – 2001 Backhoe loader tractor 310D↑ Series: 310E 310G↓ Production Manufacturer John Deere Type Backhoe loader tractor John Deere 310E Engine

How big is a John Deere backhoe dump?

Backhoe & Loader Dig depth 171 to 215 inches Dump angle 45 inches 114 cm Loader/Backhoe details Electrical Charging system alternator Charging amps

How much psi does a backhoe loader have?

Type open center Capacity 24 gal 90.8 L Pressure 3625 psi (backhoe) 249.9 bar 2750 psi (loader) 189.6 bar Total flow 28 gpm

What kind of clutch does a 350C reverser have?

The 350C and 350D have wet or oil bath clutches and brakes. On older dry clutch machines, there is a mechanical pressure plate that engages the clutch packs.

What are the features of a John Deere backhoe loader?

ADD VERSATILITY WITH: Mechanical front-wheel drive with: Offset driveshaft for better ground clearance Extendable dipperstick Full-power-shift reverser Torque converter Single-lever loader control Two-lever backhoe control Two-lever stabilizer control with anti-drift lock- outs I

When did the JD 350C reverser come out?

Last edited by LeonardL on Sat Dec 31, 2011 3:09 pm, edited 1 time in total. 40 plus years working on JD 350s, 400Gs, 450s and other equipment both Ag and Construction. Correct me if I a wrong, but I belive most dozer machines were equiped with a reverse gear in the transmission where are loader machines were not.

What causes steering wheel to go back to center?

If return is slow, or requires you to manually move the steering wheel back to center, you should focus on these areas: Possible Cause #1: Friction in your steering system — steering gear, linkage, etc. Possible Cause #2: Friction in suspension system requiring lubrication or replacement of components. Possible Cause #3: Excessive negative camber.

What causes steering to wander from one side of the road?

Problem: Steering Wander. Wander is a vehicle’s tendency to to drift from one side of the road to the other. Possible Cause #1: Mismatched tires or uneven tire pressure. Possible Cause #2: Linkage binding or insufficiently lubricated.

How does tilt steering work on a tractor?

There is a shaft that runs down the center of the rod that releases the pressure so you can tilt the steering wheel. The seal must have failed. Got a new one and installed it and now it is operating fine. Had to pull the steering column to make it easier to work on.

Is there a problem with my 5420 tilt steering?

I have a 5420 and my tilt steering won’t lock. My steering wheel just moves up and down. Any suggestions would be greatly appreciated. Welcome to GTT!

Why does my steering wheel move when I hold the lever?

If I hold the lever the steering wheel still moves. You’re probably going to need to open it up and see what’s worn/broken. Only then will you really know what’s wrong. If you’re patient, other owners may be along to add to this thread.

The John Deere 310A is a 2WD backhoe loader tractor manufactured by John Deere in Dubuque, Iowa, USA from 1975 to 1982. The John Deere 310A is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and a gear type transmission with 8 forward and 8 reverse gears and dry disc clutch.

Why does my car not start when I press the brake?

The ikey uses the brake switch to tell if you’re pressing the brake when trying to start the car. So if your brake lights are still coming on then the switch is working and it’s probably the battery. If the brake lights aren’t coming on then its most likely the brake switch (cheap part that several have had to replace).

What should I do if my Kubota Tractor won’t start?

When a tractor doesn’t start, troubleshooting should begin with an examination of the Kubota safety switches. Owners sometimes report intermittent starting issues that are traced back to one of the switches.

Why does the brake pedal won’t go down?

Upon further inspection, it appears the master cylinder on the brake was leaking. This could be the issue……….overnight fluid seeps in and makes the brake impossible to push. After some pumps and turning the car ON, the pressure is returned to normal and the car will start.

What kind of backhoe is a 2012 John Deere?

2012 John Deere, Model Backhoes, 2012 Deere 410K Tool Carrier. 4wd, Extend a hoe, Front Hyd Q/C. Enclosed Cab, A/C, Shuttle Shift, Pilot Controls, Pat… 1998 John Deere 310E backhoe.

Can a John Deere 310sg move FWD or Rev?

Have john Deere 310SG will not move fwd or rev. When lifted all 4 tires turn, you can stop by hand. All 4 speeds work, if you throttle up in neutral and push into gear either way speeds up for sec. Have checked fluid, good. All fuses and relays click.

Where are the transmission plugs on a John Deere 310sg?

The wiring diagram shows the transmission plugs X24 (top of the trans, Forward, Reverse and Low range) and X25 (bottom of the trans, speed solenoids) and where the blue and black wires are supposed to go. The X21 and X22 connectors in the diagram are where the transmission wires connect to the cab harness. Hope this helps.

Can a Deere backhoe travel in higher gears?

But in higher gears, 3rd and especially 4th, the machine probably will not travel too effectively(comes to a stop on inclines).

Who is the manufacturer of the John Deere 310 backhoe?