Where did the timing belt go on my 2007 PT Cruiser?

It has 96,000 miles. is this an interference engine and maybe the … read more Timing belt on 2007 PT Cruiser went. It’s at repair shop. Timing belt on 2007 PT Cruiser went. It’s at repair shop. Right at the start of the job the 4″ bolt that comes out from the side of the engine to remove the … read more

What should I do if my timing belt snaps?

At this point, the camshaft sprockets will align with the marks on engine, and the crank sprocket will align with the marks on the engine. Some engines, like GM interference DOHC V6s, will require special tools keep the cams from moving, so consult with a factory service manual if you can.

Can a crank pulley be removed from a timing belt?

The crank pulley is the main pulley at the bottom of the engine. It needs to be removed in order to change the timing belt. However, it’s not easy if you only have hand tools, since the torque on this bolt is often pretty extreme.

How often should a timing belt be replaced?

Manufacturers employ various schedules and measures for timing belt replacement, but the rule of thumb is 60,000 miles, or 5 years, whichever comes first. Is My Engine Safe If My Timing Belt Snaps?

What happens if your timing belt is not replaced?

This may be rare but it can happen if your timing belt is not replaced timely. On some engines, incorrect timing or a snapped timing belt can lead to catastrophic engine damage. In so-called ‘interference engines’, it will mean that the pistons and valves will hit.

What happens if the timing belt snaps on an interference engine?

While it is possible that no damage could occur from a snapped belt on an interference engine, such a case is unlikely. In a non-interference engine, the pistons and valves don’t occupy the same space, so if the timing belt snaps, no valve or cylinder damage occurs.

How much does it cost to replace timing belt on PT Cruiser?

Chrysler PT Cruiser Timing Belt Replacement 2.4 Engine. How to replace the timing belt on Pt Cruiser. We took this video to show you what you need to do in order to replace the timing belt on a Chrysler Pt Cruiser 2.4 Engine. Most Shops and Dealers will Charge you over $1000+ for timing belt replacement.

Manufacturers employ various schedules and measures for timing belt replacement, but the rule of thumb is 60,000 miles, or 5 years, whichever comes first. Is My Engine Safe If My Timing Belt Snaps?

What was the year of the PT Cruiser?

2009 was also a relatively problem-free year for the PT Cruiser as far as timing belts go. Well it did have some issues for a few drivers, nothing specific was related to the timing belt so if that’s an area of concern for you, the 2009 PT Cruiser is it one that you need to worry about too much.

What kind of engine does a PT Cruiser have?

I have a 2006 pt cruiser 2.4 litre engine. it broke the timing belt while driving. It has 96,000 miles. is this an interference engine and maybe the … read more Timing belt on 2007 PT Cruiser went. It’s at repair shop. Timing belt on 2007 PT Cruiser went.

Can a PT Cruiser be a valve interference engine?

The 2.4 PT Cruiser is not a valve interference engine. Since the belt has broket, the pistons will not be hit on their tops by the valves, but the valves in the engine can hit each other. The only way to tell if this has happened is by performing a compression check on the engine. Most PT cruisers will not experience any internal damage.

How many miles does it take for timing belt to leak?

WB Motors spotted an aged head gasket leak and VERY IMPORTANTLY pointed out that at 80,000 miles the timing belt can go without symptoms and take the engine with it. The Cruiser had 82,000 miles on it and I did both repairs. Rust underneath is the current issue.

How often do you change the oil on a PT Cruiser?

We have 6 PT Cruiser that are use for our installers, we change the oil every 4k miles, replace the transmission fluid every 50k miles and they are all running and getting close to 180k to 200k. No major problems, they are very good small vehicles.

Why are the valves on my PT Cruiser not working?

While the valves fail to hit the pistons, there is a possibility that they will hit each other if the timing belt breaks or slips at high rpms. Park the PT Cruiser on a level, paved surface and set the parking brake. Remove the spark plug wires from the spark plugs one at a time.

Why do PT Cruisers have bent valve stems?

To expand on guyiknow’s answer. PT Cruisers run semi interference engines. The path of the valves will not enter the path of the piston. It is possible for the exhaust valves and intake valves to contact at which point you end up with bent valve stems.

Are there any problems with the PT Cruiser?

In 2002 there were also some issues with the engine in the PT Cruiser that related to timing belt problems. It was not an overarching problem that a lot of drivers experienced, but some did have problems with the belt breaking sooner than it should have. There were a number of problems in 2003 with timing belts failing on drivers.

What should I do if my timing belt breaks?

The belt breaking doesn’t cause other problems but other problem like water pump seizing, cam shaft bearing seizing, timing belt tensioner seizing will break the belt. If you do change the belt either before it breaks or after it breaks you should also change the water pump and belt tensioner at the same time every time.

Are there any problems with the timing belt?

There were a number of problems in 2003 with timing belts failing on drivers. One of the big issues with this was that the check engine light would not necessarily come on to let you even know there was a problem with the timing belt.

What kind of timing belt does Turbo PT Cruiser have?

PT is basically a PL (Neon) with the 2.4L. My first timing belt was a learning curve. After you learn the best tools and techniques for the job, it is much quicker and easier. My first one I had to take back apart because it was a tooth off.

What should I do if my PT Cruiser belt breaks?

My 2005 pt cruiser belt broke they replaced it but could not start engine was told that possible valve damage ended up getting head reconditioned total cost $5600 : ( 12 people found this helpful.

Do you need to change the timing belt?

I don’t see it mentioned in your post, but IMO while the area was torn apart, it would have been a good idea to change the center motor mount and with a new bolt, both cam seals and the crank seal, in addition to the other timing belt parts that you did.

Where are the Allen bolts on a Chrysler PT Cruiser?

Had to drop the alternator out to get to the bolt holding the dryer/accumulator to the fender well. The bolts holding the a/c line to the dryer/accumulator for some reason are behind the lines next to the firewall. Nice place Chrysler, couldn’t have put the allen bolts in front.

Where did the timing belt go on my 2007 PT Cruiser?