Where are the controls on a JCB LOADALL?
Where are the controls on a JCB LOADALL?
The original JCB 520 loadall does anyone remember the controls. There are 4 pedals on the floor i know the middle two are the independent brakes and the right one is the throttle. But am unsure is the left one a type of clutch and do you just give revs to go or do something with the left pedal.
Why does my JCB 3CX not move forward or back?
It will work for two or three hours then transmission gets hot and will not move forward or back. I have changed oil,filter and checked cooler lines. I have checked for blockage in lines to cooler and have taken the heat exchanger of but there is not a problem there.
What kind of drive does a JCB 525 telehandler have?
I’ve got a JCB 525b-2hl telehandler which I’ve steadily been going over repairing bits and pieces. Whilst using it today, I completely lost forward drive on a hill. It just dropped out. I’ve checked the two terminals which plug into the solenoids which sit on the torque converter and they are showing 12volts when the rev/forward lever is selected.
How many excavator switches are there at JCB?
We found 85 results matching your criteria. 4 in stock! 1 in stock! 2 in stock! 1 in stock! 1 in stock! 1 in stock! 1 in stock! 3 in stock! 1 in stock! 4 in stock! 2 in stock! 2 in stock! 3 in stock! 2 in stock! 4 in stock! 2 in stock!
It will work for two or three hours then transmission gets hot and will not move forward or back. I have changed oil,filter and checked cooler lines. I have checked for blockage in lines to cooler and have taken the heat exchanger of but there is not a problem there.
What kind of tool carrier does a JCB use?
JCB tool carrier parallel lift carriage with manual or hydraulic pin locking, accepts forkframe with integral pallet forks and a wide range of attachments. Compact Tool Carrier: Compact Loadall compatibility.
How tall is a 520-40 Hunter JCB machine?
Machine model 520-40 m (ft-in) A Overall height 1.97 (6-6) B Inside width of cab 0.92 (3-0) C Width over tyres (min) 1.56 (5-1) D Front track 1.29 (4-3) E Wheel base 1.90 (6-3) F Overall length to front of tyres 2.92 (9-6) G Overall length to front of carriage 3.38 (11-1) MAX. PAYLOAD: 1650kg MAX. LIFT HEIGHT: 4 metres (13ft 1in) MAX.
How tall is a 520-40 Hunter LOADALL machine?
LOADALL | 520-40 Machine model 520-40 m (ft-in) A Overall height 1.97 (6-6) B Inside width of cab 0.92 (3-0) C Width over tyres (min) 1.56 (5-1) D Front track 1.29 (4-3) E Wheel base 1.90 (6-3) F Overall length to front of tyres 2.92 (9-6) G Overall length to front of carriage 3.38 (11-1) MAX. PAYLOAD: 1650kg MAX.
