Easy tips

When was the last time my Chevy fuel pump failed?

When was the last time my Chevy fuel pump failed?

The technical service bulletin that explains the cause of the repeat failure of the Chevy fuel pump replacement unit covers all years from 1996 to 2003 and includes all of the pickup trucks. Also included is the Tahoe and suburban and their GMC counterparts such as the Sierra and Envoy. Oh and don’t forget the Cadillac Escalade is also included.

Why does my fuel pump not prime with the key on?

Fuel pump doesn’t prime with key on. I’ve been trying to figure this out for a couple days now. My 01 Tiburon wouldn’t start the other day. It would crank, but wouldn’t fire. When I turn the key to the “on” position, the fuel pump doesn’t kick on.

What to do if your fuel pump won’t start?

Ugh…..I hate chasing down electrical problems. If jumping the fuel pump relay makes the pump run, and if the relay tests good. Then you need to determine why the ECM is not telling the relay to close. Start by testing continuity back to the ECM.

How can you tell if your fuel pump is dead?

Of course, there could be other explanations for your engine’s failure to start besides a failed fuel pump. To confirm that your pump has failed, check the pressure in your fuel lines with a fuel pressure gauge; if it reads zero, then your pump is likely dead.

What’s the life of a Chevy fuel pump?

It’s happened to me more then once and I’ve read about it on auto repair forums. The original Chevy pump motor has a life expectancy of about 15-20 years. Running the vehicle out of fuel, which will actually run the pump in a dry state can shorten the expected life span.

What to do if your Chevy fuel pump fails?

Chevrolet fuel pump failures are a common and growing problem. If you have a fuel pump harness connector that looks like the flat one on the right or the square one at the bottom, then consider replacing it when replacing the pump. More details about this are below, but you might want to download your Chevy manual to help.

What happens if you run your fuel pump all the time?

The fuel pump run continuously with your engine, delivering high-pressure fuel to the fuel rail and injectors. The fuel pump keeps cool by staying submerged in fuel or else it would overheat. If you make a habit of running your tank all the way to empty before filling up; your fuel pump will most likely die before its designed lifespan.

Why is the fuel pump and relay not working?

The ignition circuit, which includes the ignition switch, controls power to many components, including the fuel pump and relay. If there is an issue with the switch or the circuit, perhaps a wiring problem, then power to the fuel system may be cut off.

Where is the connector on a Chevy fuel pump?

When you get the Delco replacement parts it comes with a new connector on the fuel pump side. The problem is the connector on the vehicle side of the harness. In the online Chevrolet repair manual I use, a Tech Tip states, the connector should be replaced with the fuel pump assembly.

What happens when you turn off the fuel pump?

As a car sits, the fuel pressure gradually decreases and modern cars don’t run without fuel pressure. When you first turn the key on your car, the PCM immediately powers the fuel pump to pressurize the fuel system.

Why does my Delco fuel pump keep failing?

Oh and don’t forget the Cadillac Escalade is also included. The Chevrolet service bulletin states that the cause of the repeat failures is due to worn or damaged electrical connectors at the fuel pump assembly. When you get the Delco replacement parts it comes with a new connector on the fuel pump side.

What kind of fuel pump does a Chevy Silverado need?

It turned out the pump I put in was for a 96 C1500, which has a throttle body system and the pump only produced 20-30psi. The Fuel injection in the Silverado needs 55-65psi. Be very careful you didn’t put the wrong fuel pump in!!

When you get the Delco replacement parts it comes with a new connector on the fuel pump side. The problem is the connector on the vehicle side of the harness. In the online Chevrolet repair manual I use, a Tech Tip states, the connector should be replaced with the fuel pump assembly.

Is there no power to the fuel pump?

No power to the fuel pump and the fuel relay is not getti… Q: No power to the fuel pump and the fuel relay is not getting power. My car has 190000 miles.

How often does a fuel pump need to be replaced?

It is usually unnecessary to preemptively replace the fuel pump, but if there is another service being performed on the vehicle that involves removing the gas tank, and the current fuel pump has been running for over 100,000 miles, then replacing it could save money and time in the long run.

How much does it cost to replace fuel pump in Chevy Silverado?

Chevrolet Silverado 1500 Fuel Pump Replacement at your home or office. Chevrolet Silverado 1500 Fuel Pump Replacement costs $698 on average. Following is a breakdown of the labor and parts estimates. What is the fuel pump and how does it work? The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine.

Where is the fuel pump on a 2005 Chevy Silverado?

This video outlines replacement of the fuel pump module on a 2005 Chevy Silverado Pickup in under 1 hours time. The fuel pump module is located in the fuel tank and this process involves lowering the fuel tank and replacing the pump assembly.

When do you need to replace a fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced.

When to replace fuel pump in Audi A5?

As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

Is it easy to replace a fuel pump?

Replacement of the fuel pump is not a quick or easy job. This is because the pump is tank mounted and the fuel pump is replaced as a unit. The less gas in the tank the easier it is to deal with. The replacement parts for the job are also not inexpensive.

What kind of fuel pump do I need for MY Suburban 1500?

Big SUVs like your Chevy Suburban 1500 call for big engines, and big engines need a lot of fuel. At AutoZone, we specialize in Chevy Suburban 1500 fuel pumps that are manufactured to handle your heavy-duty engine.

The technical service bulletin that explains the cause of the repeat failure of the Chevy fuel pump replacement unit covers all years from 1996 to 2003 and includes all of the pickup trucks. Also included is the Tahoe and suburban and their GMC counterparts such as the Sierra and Envoy. Oh and don’t forget the Cadillac Escalade is also included.

Replacement of the fuel pump is not a quick or easy job. This is because the pump is tank mounted and the fuel pump is replaced as a unit. The less gas in the tank the easier it is to deal with. The replacement parts for the job are also not inexpensive.

Can a defective fuel pump cause a car to stall?

More details about this are below, but you might want to download your Chevy manual to help. The defective Chevy fuel pumps can cause a stalling condition or a no start situation that can leave you stranded.

What to do if your fuel pump loses power?

Electrical wiring issues can be a nightmare if you don’t have the appropriate wiring diagrams to see which wires go to where. A mechanic, such as one from YourMechanic, will have access to the proper schematics to help you diagnose this your fuel pump’s loss of power and have your car safely back on the road.

How does a fuel pump relay get power?

The relay wires should have ground on two wires, power on one wire and switched power on another wire. To activate the fuel pump the computer actually connects one of the ground wires to complete the circuit and send power to the fuel pump.

How to check no fuel condition on GM 4.3L?

I’ve also included how to check a no fuel condition with starting fluid (although this is not the most effective way to test the fuel pump). It’s been my experience that misdiagnosing a bad fuel pump is a common occurrence on the 4.3L, 5.0L, 5.7L GM vehicles with the ‘Spider’ fuel injector assembly.

Where can I get a fuel pump harness replaced?

Replacement of the harness connector is a fairly simple operation and the parts are readily available from your GM dealer parts department. With the cost and difficulty of the repair it’s wise to follow the technical service bulletin. Take a few extra minutes and replace the connector.

How to install a mechanical fuel pump on Chevy?

To avoid this, cancel and sign in to YouTube on your computer. 327 Blown to Bits – Everything is Smashed! An error occurred while retrieving sharing information. Please try again later. 327 Blown to Bits – Everything is Smashed! Scary Hitch, Nice Frame & Box Install – 450 000 kms – How Bad Can it Be?

When do you replace the fuel pump harness?

If you have a fuel pump harness connector that looks like the flat one on the right or the square one at the bottom, then consider replacing it when replacing the pump. More details about this are below, but you might want to download your Chevy manual to help.

What do I need to replace my fuel pump?

This factory replacement unit also includes the fuel level gauge sender, hanger assembly and tank filter sometimes called the sock. Some aftermarket replacement pumps just include the motor. This means you replace the motor and transfer the used fuel pump sock, fuel sending unit, and hanger assembly.

How to remove a fuel pump from a truck?

Basic instructions on how to tip your bed and remove your fuel pump and sender assembly, replacement of the fuel pump from the sender unit and putting it back into the tank with gasket o-ring and lock ring. I also show video of the bolt hole locations on my short bed frame. Loading…

What kind of fuel pump does a 96 Silverado use?

I have a 96 Silverado 1500, and it did the exact same thing. It would fire with starting fluid after a line, filter, relay and pump replacement. It turned out the pump I put in was for a 96 C1500, which has a throttle body system and the pump only produced 20-30psi. The Fuel injection in the Silverado needs 55-65psi.

What to do if your Chevy truck won’t start?

– CarGurus.ca 96 Chevy C1500 5.7L Vortec Truck won’t start, Replaced Fuel Pump, Filter & Has Spark.

What should the fuel pressure be on a Chevy Cheyenne?

93 Chevy Cheyenne k3500, if it is running the Chevy vortec engine the fuel pump pressure is way too low, should be 56 psi+ depending on CSFI/CPI system or it will not start or open injectors, with out the aid of starting fluid. The factory manual specifies that the fuel pressure for the CSFI system should be between 56-62 PSI.

Can a 1999 Chevy c1500 / k1500 start?

Hi, our 1999 CHEVROLET C1500/K1500 is having the same issue. After sittiing for a few hours, we have to crank it and eventually put a little gas or tarting fluid in the throttle body for our truck to start but runs and drives fine once it does start and will start right up after only sitting for about an hour or so. 205 people found this helpful.

More details about this are below, but you might want to download your Chevy manual to help. The defective Chevy fuel pumps can cause a stalling condition or a no start situation that can leave you stranded.

Oh and don’t forget the Cadillac Escalade is also included. The Chevrolet service bulletin states that the cause of the repeat failures is due to worn or damaged electrical connectors at the fuel pump assembly. When you get the Delco replacement parts it comes with a new connector on the fuel pump side.

Why is gasoline bad for the fuel pump?

Gasoline is a petroleum product and lubricates the inside of the fuel pump, impeller and other moving parts. In addition, debris and sediment collects in the bottom of the tank and that stuff can damage the delicate internal workings as well.

What kind of fuel pump does a GMC k1500 have?

Had to do the job twice so not very happy about that, waste of my Sunday. This was a exact fit for my 92 GMC K1500 with a 5.7L VIN K motor. It fixed my low power, runs rough and start / stall issue.

Is the Chevy truck fuel pump good for?

Fits perfectly for any 1988 to 1998 I got this fuel pump and at the touch you can tell it’s good quality. Fits perfectly for any 1988 to 1998 fuel pump in a Chevy truck. Fuel pump is great and I haven’t had any problems with it. Also the warranty is good to have, always.

Basic instructions on how to tip your bed and remove your fuel pump and sender assembly, replacement of the fuel pump from the sender unit and putting it back into the tank with gasket o-ring and lock ring. I also show video of the bolt hole locations on my short bed frame. Loading…

What happens if you Nick a fuel pump wire?

Btw if you by some odd chance nicked the wire somehow it may be starting to deteriorate from the inside and moving the wire may be making a connection. Just a heads up. 3 people found this helpful. I went ahead and bought a whole new fuel pump.

Can a bad fuel pump cause a bad gas tank?

These are notorious for getting corroded and falling off. Bad fuel pump. A stock 87 fuel system will have a pump in each tank. The hose that connects the output of the fuel pump to the metal supply line going out of the tank has gone bad. (Inside the gas tank). This is another frequent problem.

No power to the fuel pump and the fuel relay is not getti… Q: No power to the fuel pump and the fuel relay is not getting power. My car has 190000 miles.

Where is the fuel pump on a Chevy?

Part of the engine harness tail and stop lamps harness, in the left rear side of the engine compartment, under the brake master cylinder. It is #7and #5 in the picture. Terminal B in the picture.

Where is the power wire on a Chevy fuel pump?

Want to make sure its a 5.7L engine with the classic style truck and not the new style truck with the 6.0L Right? On the fuel pump connector, the gray wire is the power wire. The thick black wire is the ground.

This factory replacement unit also includes the fuel level gauge sender, hanger assembly and tank filter sometimes called the sock. Some aftermarket replacement pumps just include the motor. This means you replace the motor and transfer the used fuel pump sock, fuel sending unit, and hanger assembly.

Where can I get a new fuel pump for my Chevy k1500?

A fuel pump replacement for Chevy K1500 eliminates these problems, so shop the incredible selection at AutoZone. Take your pick from our line of custom K1500 fuel pumps today and enjoy great benefits like free battery charging and engine diagnostic testing during your next in-store visit.

How many Chevy 1500 fuel pumps are left?

Only 4 left in stock – order soon. . . Only 13 left in stock (more on the way). . Only 20 left in stock – order soon. . Only 9 left in stock – order soon. . Only 6 left in stock – order soon.

What kind of fuel pump does GM use?

GM Genuine Parts Electrical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These pumps deliver fuel to your vehicle’s fuel injectors, helping to provide a steady, reliable fuel supply to your vehicle’s engine.

What kind of fuel pump does a corvette use?

Cross-Fire blogs recommend purchasing the 85 Corvette tuned port pump which run closer to 40-60 lbs. Even on stock Chevy drivetrains. Same fit and the extra flow is tempered with the pressure regulator. I’ve done this on a couple 84 Vettes and one 83 Z28 using AC Delco pumps with excellent results.

What happens when you replace the harness on a fuel pump?

Failure to replace the electrical connector on the harness side can cause voltage spikes across the new fuel pump. Over time this can damage the part. Replacement of the harness connector is a fairly simple operation and the parts are readily available from your GM dealer parts department.

How much does it cost to replace a fuel pump?

Without a properly functioning fuel pump, the engine won’t run. The cost of having the fuel pump replaced by a mechanic will generally be between $260 – $1009, and the price will vary greatly depending on the type of car you own. The majority of the cost comes from the parts themselves, while labor costs are usually fairly consistent.

What do I need to remove fuel pump?

Finally, the power wires should be removed from the fuel pump. There will be two wires, positive and ground, which need to be disconnected. These are usually held in place by small bolts or screws, and it should be a straightforward task. Once it’s all disconnected the old pump can be removed.

Where is the fuel pump on a car?

There are two common types of pump, either inside the gas tank or mounted just in front of it, underneath the car. This can be found by either checking under the car or following the fuel line from the tank to the pump. The insulating sleeve will need to be removed to allow access to the pump.

What happens if you have a broken fuel pump?

If the fuel pump fails completely the car won’t run at all, so the obvious benefit of replacing a broken fuel pump is being able to use the car. The more likely scenario is that the pump is sending too much or too little fuel through to the engine.

Why does my Chevy fuel pump keep failing?

The Chevrolet service bulletin states that the cause of the repeat failures is due to worn or damaged electrical connectors at the fuel pump assembly. When you get the Delco replacement parts it comes with a new connector on the fuel pump side.

Failure to replace the electrical connector on the harness side can cause voltage spikes across the new fuel pump. Over time this can damage the part. Replacement of the harness connector is a fairly simple operation and the parts are readily available from your GM dealer parts department.

How do you change the fuel filter on a Dodge Ram?

Follow the instructions below to replace the filter on a Dodge Ram with a gasoline engine. Remove the fuel pump relay from the power distribution center. This will relieve the fuel system pressure. Start the engine and allow it to run until it stalls.

What are the symptoms of a bad fuel filter?

As is the case with most automotive filters, over time the fuel filter can become excessively dirty — to the point where it can no longer filter out particles efficiently, or even restrict flow. Usually, a faulty fuel filter will produce any of the following 4 symptoms that can alert the driver of an issue with the vehicle.

Can a Chevy Silverado start with a bad fuel filter?

At the most basic of levels your Chevy Silverado needs three things to start: Air, fuel, and spark. If any of these things aren’t present, the engine won’t turn over at all. If there’s been zero warning that the fuel filter could be going bad (hesitation, difficulty starting, etc) than a clogged fuel filter might not be the place to start.

Here are the most common symptoms of a bad fuel filter in your Chevy Silverado: The only way that you are going to know that your Silverado’s fuel filter may be going out is that it is no longer letting enough fuel through to keep the engine running under a heavy load, or at high-speed.

How do you replace the fuel pump in a Chevy Silverado?

Pull the quick release tabs off of the old fuel lines and put them onto the nipples of the new fuel pump. Reconnect the three fuel lines to the quick connect tabs. If you have to swap out the wiring harness, make sure that you do not cut into the wires for the fuel pressure sensor.

Can a fuel pump cause a no start condition?

CASE 1: If your fuel pressure gauge read 50 PSI or more as the engine cranked. This means that the fuel pump on your 4.3L, 5.0L, or 5.7L is OK and not the cause of your No Start Condition. The next step is to observe the fuel pressure gauge’s needle (after your helper stopped cranking the engine).

What happens when the fuel pump goes out on a GMC Sierra?

There are physical signs that you can feel when your Sierra’s fuel pump is going out. Before taking anything apart, check to see if your engine’s computer has any trouble codes saved in it. The engine may throw a P0087 trouble code. This trouble code detects that the fuel rail/system pressure is too low.

Why does my GMC Sierra suddenly stop running?

Truck suddenly stops running, acting like it’s out of fuel. There is fuel in the gas tank and, I can hear the fuel pump when I turn the ignition on. Is there a fuse, or relay that is maybe causing this to happen?

What to do if your Yukon Denali stops running?

I have a 1999 Yukon Denali, stopped running going down the road, acted like it ran out of gas. Added gas, didn’t help. Changed the Crank Position Sensor, didn’t help. Changed the Spark Plugs, didn’t help. No spark at the plugs, no spark out of the coil, changed the coil, didn’t help.

CASE 1: If your fuel pressure gauge read 50 PSI or more as the engine cranked. This means that the fuel pump on your 4.3L, 5.0L, or 5.7L is OK and not the cause of your No Start Condition. The next step is to observe the fuel pressure gauge’s needle (after your helper stopped cranking the engine).

When does a fuel pump relay go bad?

If you’re lucky and your car restarts after a short while, your fuel pump relay is faulty, which requires immediate inspection. The fuel relay may be the culprit if the car suddenly seems to lose power while driving, or slowing down with no apparent reason.

What happens if you run your fuel pump dry?

Even if the pump doesn’t quit after running it dry, it could suffer a considerable reduction in operating pressure. Nevertheless, the more you run the vehicle low on fuel or out of fuel the more damage will occur internally and the quicker the pump will fail.

What did my 02 Yukon XL die of?

Last summer my 02 yukon XL died while my wife was driving, she said it would lose power, and die, it restarted a couple of time, drive for a few miles, the same thing. we replaced the fuel filter, and got it home, test fuel pressure, all seemed okay.

What happens when a fuel pump relay goes bad?

If the fuel pump relay has an issue while the vehicle is operating it will cut off power to the fuel pump, which will cause the engine to stall. A faulty relay may allow the vehicle to be restarted a short while later, while a completely failed relay will not.

Author Image
Ruth Doyle