When to replace the EGR valve on a Dodge Ram?

Order a Dodge Ram EGR valve replacement from AutoZone to ensure that your engine performs well for the long haul. The EGR valve is responsible for recirculating some of your exhaust through the combustion process, which decreases the amount of greenhouse gases that enter the environment.

Where is the EGR valve located on a car?

It usually has a diameter of three inches and is located at the side of the engine but towards the upper part. On these past models, there is a vacuum hose that runs the EGR valve. The tube connects the upper part of the EGR to the carburetor. The valve’s metal disk contains a vacuum diaphragm, a plunger, and spring.

Can a Dodge Ram stop running if the valve is not replaced?

If the EGR valve for your Dodge Ram isn’t replaced, your truck can stop running altogether. Order a Dodge Ram EGR valve replacement from AutoZone to ensure that your engine performs well for the long haul.

Can a bad EGR valve cause a vacuum leak?

An EGR valve can become faulty in two ways; it can be closed all the time or open at all times. It could also remain clogged by carbon and debris. 1. If the valve sticks open When an EGR valve is an open position, it creates a vacuum leak. The leak results in incomplete combustion, which usually causes hesitation and rough idling.

What happens when your EGR valve fails to open?

The “check engine” indicator will light up on the dashboard when your EGR valve fails. This will happen the moment your vehicle’s central computer senses that the valve is in an abnormal position. For instance, if the EGR valve fails to close or open as it should, the computer will detect an issue and activate the “check engine” light.

What causes a Dodge Ram to stop running?

Select your Year, Make, Model and Engine to find those that fit your vehicle. Although there are many emission control systems that have no effect on the drivability of your Dodge Ram, a faulty EGR valve causes misfiring, detonation and hard starting. If the EGR valve for your Dodge Ram isn’t replaced, your truck can stop running altogether.

Where is the EGR mating surface on a Dodge Ram?

Figure 5. The cylinder head EGR mating surface on the 4.7/3.7 engine. Slide the two bolts with 10mm heads through the valve, and then place the gasket over the bolts. Now guide the valve down into position against the cylinder head/intake manifold.

What kind of engine does a Dodge 1500 have?

Model year: Over time, Dodge will change the types and sizes of engines and other components in the Ram 1500. If you’re unsure of the model year or other vehicle-specific information, you can use your truck’s VIN number. Engine size: For the Ram 1500, the two main types of engines are V-6 and V-8.

Where is the EGR valve on a hemi truck?

First remove the negative battery cable with a 10mm socket with extension and set it aside so it is not touching any metal part of the truck. The EGR valve is located on the left side (facing the front of the truck) of the engine block just after the spark plugs and looks like this.

How much does a Dodge Ram 1500 EGR valve cost?

Your Dodge Ram 1500 will be happy to know that the search for the right EGR Valve products you’ve been looking for is over! Advance Auto Parts has 13 different EGR Valve for your vehicle, ready for shipping or in-store pick up. The best part is, our Dodge Ram 1500 EGR Valve products start from as little as $46.99.

How do you replace the EGR valve on a hemi?

There are two bolts holding the exhaust pipe to the lower part of the EGR valve, the bolts can easily be removed with a 8mm socket with an extension. If they are stuck use some PR Blaster on them, mine came off easily. Make sure to hold onto the gasket that is between the pipe and the valve when removing the pipe.

Where is the EGR plug on a Dodge Ram?

At the top of the valve you will see a black electrical connector plug with a red tab. Push the red tab to the right to unlock it, and then squeeze the flexible tab on the connector plug while pulling it away from the valve. Now, remove the exhaust hose from the EGR valve. There are two bolts with 8mm heads.

What are the symptoms of a bad EGR valve?

Depending on the particular problem, you’ll notice symptoms like rough idle, pinging or knocking engine sounds, an increase in emissions, poor fuel economy, hard starting and even stalling.

What causes a 2004 Dodge Ram 1500 to stall?

Some 2004 Dodge Ram 1500s stall when braking and at idle, as well. The most common report is that on a cold start, the truck won’t move when put in gear. The transmission may also slip or refuse to shift at all, which is one of the main 2006 Dodge Ram 1500 transmission shifting problems.

Is the Mopar EGR valve a direct fit OEM replacement?

Mopar EGR valves is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer. The Mopar Exhaust Gas Recirculation (EGR) Valve is the same product supplied by the automotive dealer and is provided in the vehicle manufacturers branded packaging.

When to replace the EGR valve on a Dodge Ram?