When did the S10 Blazer get anti lock brakes?
When did the S10 Blazer get anti lock brakes?
The serpentine accessory drive for the 4.3L motor was modified where the air pump was eliminated and further lightened. From at least 1991 onward, all S10 Blazers and Jimmies came with 4 wheel anti-lock brakes as standard equipment.
What kind of refrigerant did the 1994 Chevy S-10 use?
Much like 1993 the 1994 model year added a third brake light and the rear spoiler was discontinued. 1994 was a transition year for many automakers when it came to switching from R-12 Freon to CFC-free R134a refrigerant. The redesigned 1994 S-10 and Sonoma pickups used R134a refrigerant.
Can a DTC 9 be set while the brake lamp is off?
DTCs 6, 9, and 10 will only turn the BRAKE lamp on while the fault exists. These are soft codes faults and can only be read with the Tech 1 scan tool. Do not jump terminal A to terminal H if the BRAKE dashboard lamp is not on. Jumping the terminals while the BRAKE lamp is off will set a false DTC 9.
How does the brake light wiring system work?
How Brake Light Wiring Works. The brake light wiring system in most cars is not overly complex. At one end, you have the lights themselves: bulbs in sockets connected to a wiring harness. At the other end is the brake switch, where the pedal presses down and creates contact that completes the circuit. The system draws power from the car’s battery.
Why does my Chevy S10 have a brake light?
Your Chevy S10 ‘s brake light indicator is there to let you know that there is an issue with the brake system. It is different than the anti-lock brake system, which gets its own ABS warning light. The brake light indicates that there is a problem with the physical braking system itself.
What causes the brake warning light to come on?
It can also be the result in worn disc brake pads. If you see the Brake Warning Light illuminated, it is probably a leak. Although, if you have a fluid level sensor in the master cylinder reservoir, you may see this light come on when the fluids are low. Brake failure is common if the fluid leaks out of the system.
How does ABS work on a Chevy S10?
Your S10’s ABS system uses a system of sensors to determine wheel speed when braking. If one of the wheels is starting to lock up, it’ll apply the maximum amount of brake to that wheel in order to keep it from sliding. Wheels that are turning will slow a vehicle faster than a locked wheel.
What causes a soft brake pedal on a Chevy?
Soft or Spongy Brake Pedal: Too much air in the system due to improper bleeding is usually the cause of this problem. However, it can also be due to fluid loss or a low fluid level. Bleed the brake lines as recommended by Chevy to fix this. You could also have a ballooning brake hose when the brakes are applied.
Where does the Chevrolet S-10 Blazer come from?
The Brazilian variant, based on the second-generation S-series, continues in production in Brazil with their own sheetmetal stampings as well as in Canada with the Brazilian, Indonesian and Russian sheetmetal stampings).
Why is my Blazer still picking up speed?
2) The Blazer still picks up speed and drives well except for the rubbing/vibration now. Would having pulled out and put back in the dash switches or being in such close proximity to the TCCM caused issues?
When did the Chevy Blazer come out in the US?
GMC S-15 Jimmy 2-door Chevrolet introduced the S-10 Blazer in 1982 along with its rebadged variant, the GMC S-15 Jimmy, and S-10 pickup truck, the latter replacing the Isuzu -based Chevrolet LUV. The Blazer and Jimmy appeared as 1983 models.
What kind of engine does the Chevy S-10 Blazer have?
The 2.8L V6 was dropped as an option on the S-10 Blazer and Jimmy in 1990, though it was offered as an option on the S-10 and S-15/Sonoma pickups through 1993). A 5-speed manual transmission remained standard through 1994, but only with the TBI engine.
The serpentine accessory drive for the 4.3L motor was modified where the air pump was eliminated and further lightened. From at least 1991 onward, all S10 Blazers and Jimmies came with 4 wheel anti-lock brakes as standard equipment.
When did the S10 Blazer change its name to the LS?
Also, the “S-15” name was dropped from the Jimmy. The S10 Blazer also introduced an upscale Tahoe and Sport trim packages, the Tahoe LT, which was rebadged as the LT in 1995 whilst the Tahoe package was renamed as the LS.
GMC S-15 Jimmy 2-door Chevrolet introduced the S-10 Blazer in 1982 along with its rebadged variant, the GMC S-15 Jimmy, and S-10 pickup truck, the latter replacing the Isuzu -based Chevrolet LUV. The Blazer and Jimmy appeared as 1983 models.
Where was the Chevrolet S-10 Blazer pickup truck made?
Chevrolet S-10 Blazer. The S-10 Blazer and S-15 Jimmy were based on the Chevrolet S-10 and GMC S-15 pickup trucks and were manufactured in Pontiac, Michigan; Linden, New Jersey; Moraine, Ohio; Shreveport, Louisiana; Ingersoll, Ontario, Canada; Ottawa, Ontario, Canada; Oshawa, Ontario, Canada; and São Paulo, Brazil .
What kind of car is a 1998 Chevy Blazer?
Trans Description Cont. Again Electronic Looking for other models of the Chevrolet Blazer?